NP-Channel - Network Visibility & Test Solutions for Security, Network and Application Performance

SUCHE

Produkte > Network Packet Broker (NPB)

Network Packet Brokers (Smart Filtering Appliances) leiten den für den jeweiligen Zweck benötigten Netzwerkverkehr an die Monitoring-Tools um Überlastungen zu vermeiden, Tool-Investments über verschiedene Bereiche hinweg zu optimieren und das Monitoring in NOC zu zentralisieren.
Diese fortschrittlichen Netzwerk-Controller und Data-Monitoring Switches bieten:
  • Tap, Aggregation, Regeneration, Matrix-Switching und Smart-Filtering in einem Gerät
  • Deep Packet Inspection (DPI), statisches oder dynamisches Load-Balancing sowie Snapshot Packet-Capture
  • Fast ProPush™ Statistiken für die Microburst-Erkennung
  • Niedriglatente, hardware-basierte TapFlow™ Filtering-Engine
  • Einsetzbar von 10 Mbps bis zu 100 Gbps
  • Inline- und SPAN-Netzwerkmodule
  • Doppelte, Hot-Swappable-fähige Stromversorgungen

New Needs to Solve the Tools Problem


Download Versastream™ Network Packet Broker Comparison Matrix

Filtern nach Topologie: Medientyp:
Hersteller:

Director - Produktfoto - Versastream 1G Kupfer/SFP Network Packet Broker
Versastream 1G Kupfer/SFP Network Packet Broker

Zum Vergrößern bitte anklicken - Director - Produktfoto - Versastream 1G Kupfer/SFP Network Packet Broker
The Datacom Systems VERSAstream helps solve many of today's most pressing tool deployment problems by allowing companies to conveniently connect test and monitoring tools to any traffic on the network. Not only does this provide access capabilities to leverage network tools throughout the enterprise, it allows multiple departments with different needs to share tools and network access points with remote and centralized control.

Full Network Visibility for Monitoring Solutions

Aggregation
Monitoring network traffic from two different sources is an important and frequent requirement in network analysis, commonly referred to as data "aggregation". For example, in order to properly troubleshoot most network problems, network professionals need to receive traffic from both sides of a full duplex conversation.

Many network analysis or security tools are capable of monitoring traffic from many different points in the network at once. These tools however, only have a limited number of network interface cards and can only receive traffic from as many sources as they have ports.

Aggregation allows traffic to be combined from multiple sources including tap outputs, SPAN ports, or mirror ports. By combining the traffic originating from different sources into a single link, a single tool can be leveraged to provide security or analysis to a larger part of the network.

Regeneration
One-to-Many configurations replicate copies of identical network traffic to provide multiple tools monitoring access to the same links. In addition to eliminating contention for access to critical links, multiple tools can be connected to the same traffic streams for redundancy, testing, or advanced monitoring applications.

In addition to being able to replicate traffic to multiple tools, regeneration also provides the capability of sharing identical copies of traffic with multiple departments. This can eliminate SPAN port contention and allow each department access to a wider variety of data. With fully customizable regeneration, each department has the ability to access only the traffic flows that they need to see to do their job.

Port Steering (Any-to-Any)
Every port on the VERSAstream™ is capable of sending incoming traffic to any other port, and as a result, is capable of receiving traffic from any other port.

Since the port steering is left unrestricted, it is possible to set up the VERSAstream™ in a way that best compliments the data capturing architecture. These Any-to-Any ports can be dynamically configured through an easy to use command line interface (CLI).

Configurability
Using an easy to use command line interface (CLI), all port settings and management settings can be configured on the fly. As port speeds, network setup, and traffic requirements change the VERSAstream™ can with them.

Features like SNMP can be enabled and configured through the CLI for easier managment of the switch, While traffic related features like VLAN Tag Stripping can be enabled and configured through the CLI to customize it´s traffic flows.

Secure Access to Traffic
VERSAstream™ Data Access Switches are deployed out-of-band, and have no MAC or IP settings on the traffic ports. Because of this, the switch is invisible to the network and does not modify the traffic passing through it.


VS-1204BT-S
 
4-Port Kupfer Data Access Switch

VS-1208BT-S
 
8-Port Kupfer Data Access Switch

VS-1208BT/SFP-S
 
8-Port Kupfer / 2-Port SFP Data Access Switch

VS-1210-SFP-S
 
10-Port SFP Data Access Switch

Zubehör
RMC-2 2-TAP 1U Rack Mount Chassis  
RMC-12-2 12-TAP 6U Rack Mount Chassis  
RPS-12-5-AC 12-TAP Dual Redundant Rack Mountable AC Power Supply Unit  
RPS-12-5-DC 12-TAP Dual Redundant Rack Mountable DC Power Supply Unit  

ANY TO ANY PORTS:
- Any-to-Any Ports: Four (4) 10/100/1000 Any-to-Any ports (RJ45)
- Management Port: RJ45
- Console Port: DB9

POWER REQUIREMENTS:
- Two (2) External AC Adapters (Included)
- Input: 100-240VAC, 50-60Hz, 0.8A

CERTIFICATIONS: CE, RoHS

DIMENSIONS (HxWxD): 1.10 x 8.00 x 7.00 in (2.79 x 20.32 x 17.78 cm)

WEIGHT: 1.6 lbs. (0.7 kgs)

ENVIRONMENTAL:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C)
- Humidity: 5 to 90% non-condensing

WARRANTY: One (1) Year Hardware Warranty included, Advanced Replacement-Next Day, 3rd Business Day options available

  • Port Steering Any-to-Any ports allow traffic aggregation and copies to multiple tools
  • Consolidate monitoring tools to reduce management expenses and lower tool costs
  • Single point of deployment and remote management minimizes management expenses and reduces MTTR
  • Deploy tools right away without impacting your production network
  • Keep all your tools plugged in while troubleshooting
  • Easily share scarce SPAN ports and test access points without maintenance windows or approval
  • Provide immediate networkaccess for new compliance monitors
VS-1204BT-S
Data Sheet PDF-Datei Data Sheet
VS-1204BT-S
Application Guide JPG - Datei Deployment
VS-1204BT-S
Installation Guide PDF-Datei Install Guide
VS-1208BT-S
Data Sheet PDF-Datei Data Sheet
VS-1208BT-S
Application Guide JPG - Datei Deployment
VS-1208BT-S
Installation Guide PDF-Datei Install Guide
VS-1210-SFP-S
Data Sheet PDF-Datei Data Sheet
VS-1210-SFP-S
Application Guide JPG - Datei Deployment
VS-1210-SFP-S
Installation Guide PDF-Datei Install Guide
VS-1210BT/SFP-S
Data Sheet PDF-Datei Data Sheet
VS-1210BT/SFP-S
Application Guide JPG - Datei Deployment
VS-1210BT/SFP-S
Installation Guide PDF-Datei Install Guide

Director - Produktfoto - Versastream 1G Kupfer/SFP Network Packet Broker mit Filtering & LB
Versastream 1G Kupfer/SFP Network Packet Broker mit Filtering & LB

Zum Vergrößern bitte anklicken - Director - Produktfoto - Versastream 1G Kupfer/SFP Network Packet Broker mit Filtering & LB
Flexible, Any-to-Any Line-Rate Hardware Based Load Balancing and Packet Filtering for Cost Effective Data Capture and Monitoring Applications. 12-24 Ports Any-to-Any Switch with Load Balancing. Flexible, Any-to-Any Line-Rate Hardware Based Load Balancing and Packet Filtering for Cost Effective Data Capture and Monitoring Applications

Data Capture Infrastructure Optimizes Network Monitoring and Increases Efficiency
Networks are growing more complex, carrying more services, higher volumes of multi-protocol network traffic, and requiring greater bandwidth. At the same time, network and security personnel are required to monitor and analyze more links in greater detail throughout the network in order to meet application performance demands, minimize security threats, and meet regulatory compliance. Datacom Systems helps solve many of today's most pressing tool deployment problems by allowing organizations to conveniently connect 1G test and monitoring tools to any traffic on the network.

Load Balancing
Balance traffic across multiple ports to allow growth as the volume of data increases. Load balancing helps prevent loss of data by enabling deployment of redundant security tools that can back each other up, in the event of failure while their software updates. As link utilization increases, you need to be able to distribute traffic across more analysis tools. Load balancing allows you to extend the life of existing devices as your network traffic increases.

Data Filtering
Instead of tools attempting to keep up with aggregate traffic streams, the VERSAstream can apply packet filters to the data to increase tool efficiency and eliminate port oversubscription. Line-rate hardware filtering on each port allows you to customize and streamline the amount and type of data each connected monitoring tool receives. Because they are receiving only traffic of interest, tools run faster, data is more manageable, and issues are resolved quicker. Command line filtering uses Wireshark based syntax.

Aggregation (Many-to-Any)
Many-to-Any monitoring access aggregates network traffic and provides visibility for one or more monitoring tools. Aggregate and reassemble full duplex conversations from one or more trunked links. Perfect for tools that don't support multiple monitoring interfaces or for redundant networks, EtherChannel, load balanced servers, and asymmetrically routed traffic.

Regeneration (Any-to-Many)
Any-to-Many configurations replicate copies of identical network traffic to provide multiple tools with monitoring access to the same links. In addition to eliminating contention for scarce SPAN ports and test access points, multiple tools can be connected to the same link for redundancy, testing, or advanced monitoring applications.

Port Steering (Any-to-Any)
Any of the ports can be configured as input (network) or output (monitoring) ports on the fly through an easy to use command line interface (CLI) or Web-based management.


VS-1012-F
 
12 Port Any-to-Any Switch mit Filtering & Load Balancing

VS-1024-F
 
24 Port Any-to-Any Switch mit Filtering & Load Balancing

Zubehör
VS-1012-F-1 VERSAstream™ 12 Port Data Access Switch SFPs Single Power Supply  
VS-1012-F VERSAstream™ 12 Port Data Access Switch SFPs Dual Power Supply  
SFP-RJ45 10/100/1000BT Copper Transceiver  
SFP-LX 1G Singlemode Fiber Transceiver (9µ)  
SFP-SX 1G Multimode Fiber Transceiver (50 or 62.5µ)  

ANY TO ANY PORTS
- Any-to-Any Ports: Twelve (12) (Supports SFP SX, LX, BT)
- Management Port: RJ45
- Console Port: DB9

POWER REQUIREMENTS
- Single or Dual Redundant Hot Swappable Power Supplies (Included)
- Maximum Power Consumption: Less than 200 Watts
- Individual Power Supply Rating: 100-240V ~47-63Hz 4A MAX.

CERTIFICATIONS: CE, RoHS

DIMENSIONS (HxWxD): 1.72 x 19.00 x 21.00 in (4.37 x 48.26 x 53.34 cm)

WEIGHT: 18.15 lbs (8.23 kgs)

ENVIRONMENTAL
- Operating Temperature: 32° to 131°F (0° to 55°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C)
- Humidity: 5 to 95% non-condensing

FILTERING
- IPv4 Address Sources and Destinations, Subnets
- MAC Address Sources and Destinations
- Ports
- Ethertype
- VLAN
- IPv6 Address Sources and Destinations, Subnets

WARRANTY: One (1) Year Hardware Warranty included, Advanced Replacement-Next Day, 3rd Business Day options available



  • Load Balancing - Balance sessions across multiple outputs for monitoring redundancy
  • 240 Gbps backplane
  • All ports active with full features no per port licensing. Input from passive TAPs or SPANs.
  • Filtering - Line-rate hardware-based filtering can eliminate port oversubscription.
  • Filter on IPv4 Src/Dst Address, MAC Address, Protocol, Port, Ethertypes i.e. MPLS, VLAN, IPv6 Src/Dst Address
  • Aggregation/Regeneration - Combine multiple network links or channels into one stream or send copies to multiple connected tools to share data sources
  • Media Conversion - Leverage existing monitoring tools regardless of media type
  • Manage device remotely or locally with Web-based management (HTTPs) or extensive CLI (telnet/SSH)
  • SNMP v2c, v3c
  • RADIUS, TACACS+
VS-1012-F
Data Sheet PDF-Datei Data Sheet
VS-1012-F
Application Guide PDF - Datei Deployment
VS-1024-F
Data Sheet PDF-Datei Data Sheet
VS-1024-F
Application Guide PDF - Datei Deployment

Director - Produktfoto - Versastream 1G/10G SFP+/SFP NPB mit Filtering & Load Balancing
Versastream 1G/10G SFP+/SFP NPB mit Filtering & Load Balancing

Zum Vergrößern bitte anklicken - Director - Produktfoto - Versastream 1G/10G SFP+/SFP NPB mit Filtering & Load Balancing
The VERSAstream™ VS-1212/VS-1224 is a 12/24 Port Any-to-Any network monitoring switch with Load Balancing and Packet Filtering that can combine data from multiple Gigabit and 10 Gigabit Ethernet network segments into one or more streams of data. Use it to balance traffic across multiple ports as the volume of data increases. Instead of tools attempting to keep up with high-speed aggregates traffic streams, the VERSAstream can apply packet filters to the data to increase tool efficiency and eliminate port.

Data Capture Infrastructure Optimizes Network Monitoring and Increases Efficiency
Networks are growing more complex, carrying more services, higher volumes of multi-protocol network traffi c, and requiring greater bandwidth. At the same time, network and security personnel are required to monitor and analyze more links in greater detail throughout the network in order to meet application performance demands, minimize security threats, and meet regulatory compliance. Higher speed networks are being deployed, fueling the need for higher speed monitoring tools. Datacom Systems helps solve many of today's most pressing tool deployment problems by allowing organizations to conveniently connect 10G and 1G test and monitoring tools to any traffic on the network.

Load Balancing
Balance traffic across multiple ports to allow growth as the volume of data increases. Load balancing helps prevent loss of data by enabling deployment of redundant security tools that can back each other up, in the event of failure or during while their software updates. As links get faster, you need to be able to distribute traffic across lower speed analysis tools. Load balancing allows you to extend the life of existing lower speed devices as your network traffic increases.

Data Filtering
Instead of tools attempting to keep up with high-speed aggregates traffic streams, the VERSAstream can apply packet filters to the data to increase tool efficiency and eliminate port oversubscription. Line-rate hardware fi ltering on each port allows you to customize and streamline the amount and type of data each connected monitoring tool receives. Because they are receiving only traffic of interest, tools run faster, data is more manageable, and issues are resolved quicker. Command line filtering uses Wireshark based syntax.

Aggregation (Many-to-Any)
Many-to-Any monitoring access aggregates network traffic and provides visibility for one or more monitoring tools. Aggregate and reassemble full duplex conversations from one or more trunked links. Perfect for tools that don't support multiple monitoring interfaces or for redundant networks, EtherChannel, load balanced servers, and asymmetrically routed traffic.

Regeneration (Any-to-Many)
Any-to-Many confi gurations replicate copies of identical network traffic to provide multiple tools with monitoring access to the same links. In addition to eliminating contention for scarce SPAN ports and test access points, multiple tools can be connected to the same link for redundancy, testing, or advanced monitoring applications.

Port Steering (Any-to-Any)
Any of the ports can be confi gured as input (network) or output (monitoring) ports on the fly through an easy to use command line interface (CLI) or Web-based management.


VS-1212-F
 
12 Port Any-to-Any Switch mit Filtering & Load Balancing

VS-1224-F
 
24 Port Any-to-Any Switch mit Filtering & Load Balancing

Zubehör
SFP+-LR/LX LR Singlemode 10G/1G Transceiver  
SFP+-SR/SX SR Multimode 10G/1G Transceiver  
SFP-RJ45 10/100/1000BT Copper Transceiver  
SFP-LX 1G Singlemode Fiber Transceiver (9µ)  
SFP-SX 1G Multimode Fiber Transceiver (50 or 62.5µ)  

ANY TO ANY PORTS:
- Any-to-Any Ports: Twelve (12) (Supports SFP+ SR, LR, LRM, SFP SX, LX, BT)
- Management Port: RJ45
- Console Port: DB9

POWER REQUIREMENTS:
- Dual Redundant Hot Swappable Power Supplies (Included)
- Maximum Power Consumption: Less than 200 Watts
- Individual Power Supply Rating: 100-240V ~47-63Hz 4A MAX.

CERTIFICATIONS: CE, RoHS

DIMENSIONS (HxWxD): 1.72 x 19.00 x 21.00 in (4,4 x 48,3 x 53,3 cm)

WEIGHT: 18.15 lbs (8,23 kg)

ENVIRONMENTAL:
- Operating Temperature: 32° to 131°F (0° to 55°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C)
- Humidity: 5 to 95% non-condensing

FILTERING:
- IPv4 Address Sources and Destinations, Subnets
- MAC Address Sources and Destinations
- Ports
- Ethertype
- VLAN
- IPv6 Address Sources and Destinations, Subnets

WARRANTY: One (1) Year Hardware Warranty included

  • Port Steering Any-to-Any ports allow traffic aggregation and copies to multiple tools
  • SFP flexibility-supports copper and fiber media
  • Single point of deployment and remote management minimizes management expenses and reduces MTTR
  • Deploy tools right away without impacting your production network
  • Keep all your tools plugged in while troubleshooting
  • Easily share scarce SPAN ports and test access points without maintenance windows or approval
  • Provide immediate network access for new compliance monitors
VS-1212-F
Data Sheet PDF-Datei Data Sheet
VS-1212-F
Application Guide JPG - Datei Deployment
VS-1224-F
Data Sheet PDF-Datei Data Sheet
VS-1224-F
Application Guide JPG - Datei Deployment

Director - Produktfoto - Versastream 1G/10G SFP+/SFP NPB mit Filtering & Load Balancing
Versastream 1G/10G SFP+/SFP NPB mit Filtering & Load Balancing

Zum Vergrößern bitte anklicken - Director - Produktfoto - Versastream 1G/10G SFP+/SFP NPB mit Filtering & Load Balancing
12-24 Ports Any-to-Any Switch with Load Balancing. 8/16 1Gb ports and 4/8 10Gb ports. Flexible, Any-to-Any Line-Rate Hardware Based Load Balancing and Packet Filtering for Cost Effective Data Capture and Monitoring Applications.

Data Capture Infrastructure Optimizes Network Monitoring and Increases Efficiency
Networks are growing more complex, carrying more services, higher volumes of multi-protocol network traffic, and requiring greater bandwidth. At the same time, network and security personnel are required to monitor and analyze more links in greater detail throughout the network in order to meet application performance demands, minimize security threats, and meet regulatory compliance. Higher speed networks are being deployed, fueling the need for higher speed monitoring tools. Datacom Systems helps solve many of today's most pressing tool deployment problems by allowing organizations to conveniently connect 10G and 1G test and monitoring tools to any traffic on the network.

Load Balancing
Balance traffic across multiple ports to allow growth as the volume of data increases. Load balancing helps prevent loss of data by enabling deployment of redundant security tools that can back each other up, in the event of failure or during while their software updates. As links get faster, you need to be able to distribute traffic across lower speed analysis tools. Load balancing allows you to extend the life of existing lower speed devices as your network traffic increases.

Data Filtering
Instead of tools attempting to keep up with high-speed aggregates traffic streams, the VERSA stream can apply packet filters to the data to increase tool efficiency and eliminate port oversubscription. Line-rate hardware filtering on each port allows you to customize and streamline the amount and type of data each connected monitoring tool receives. Because they are receiving only traffic of interest, tools run faster, data is more manageable, and issues are resolved quicker. Command line filtering uses Wireshark based syntax.

Aggregation (Many-to-Any)
Many-to-Any monitoring access aggregates network traffic and provides visibility for one or more monitoring tools. Aggregate and reassemble full duplex conversations from one or more trunked links. Perfect for tools that don't support multiple monitoring interfaces or for redundant networks, EtherChannel, load balanced servers, and asymmetrically routed traffic.

Regeneration (Any-to-Many)
Any-to-Many configurations replicate copies of identical network traffic to provide multiple tools with monitoring access to the same links. In addition to eliminating contention for scarce SPAN ports and test access points, multiple tools can be connected to the same link for redundancy, testing, or advanced monitoring applications.

Port Steering (Any-to-Any)
Any of the ports can be configured as input (network) or output (monitoring) ports on the fly through an easy to use command line interface (CLI) or Web-based management.


VS-1112-F
 
12 Port Any-to-Any Switch mit Filtering & Load Balancing

VS-1124-F
 
24 Port Any-to-Any Switch mit Filtering & Load Balancing

Zubehör
SFP+-LR/LX LR Singlemode 10G/1G Transceiver  
SFP+-SR/SX SR Multimode 10G/1G Transceiver  
SFP-RJ45 10/100/1000BT Copper Transceiver  
SFP-LX 1G Singlemode Fiber Transceiver (9µ)  
SFP-SX 1G Multimode Fiber Transceiver (50 or 62.5µ)  

ANY TO ANY PORTS:
- Eight (8) 1Gb ports and Four (4) 10Gb ports (Supports SFP+ SR, LR, LRM, SFP SX, LX, BT)
- Management Port: RJ45
- Console Port: DB9

POWER REQUIREMENTS:
- Dual Redundant Hot Swappable Power Supplies (Included)
- Maximum Power Consumption: Less than 200 Watts
- Individual Power Supply Rating: 100-240V ~47-63Hz 4A MAX.

CERTIFICATIONS: CE, RoHS

DIMENSIONS (HxWxD): 1.72 x 19.00 x 21.00 in (4.37 x 48.26 x 53.34 cm)

WEIGHT: 18.15 lbs (8.23 kgs)

ENVIRONMENTAL:
- Operating Temperature: 32° to 131°F (0° to 55°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C)
- Humidity: 5 to 95% non-condensing

FILTERING:
- IPv4 Address Sources and Destinations, Subnets
- MAC Address Sources and Destinations
- Ports
- Ethertype
- VLAN
- IPv6 Address Sources and Destinations, Subnets

WARRANTY: One (1) Year Hardware Warranty included, Advanced Replacement-Next Day, 3rd Business Day options available

  • Load Balancing - Balance sessions across multiple outputs for monitoring redundancy
  • 240 Gbps backplane
  • All ports active with full features- no per port licensing. Input from passive TAPs or SPANs.
  • Filtering - Line-rate hardware-based filtering can eliminate port oversubscription.
  • Filter on IPv4 Src/Dst Address, MAC Address, Protocol, Port, Ethertypes i.e. MPLS, VLAN, IPv6 Src/Dst Address
  • Aggregation/Regeneration - Combine multiple network links or channels into one stream or send copies to multiple connected tools to share data sources
  • Media Conversion - Leverage existing monitoring tools regardless of media type
  • Manage device remotely or locally with Web-based management (HTTPs) or extensive CLI (telnet/SSH)
  • SNMP v2c, v3c
  • RADIUS, TACACS+
VS-1112-F
Data Sheet PDF-Datei Data Sheet
VS-1112-F
Application Guide JPG - Datei Deployment
VS-1124-F
Data Sheet PDF-Datei Data Sheet
VS-1124-F
Application Guide JPG - Datei Deployment



PREISANFRAGE





*:
3+6=
* PFLICHTFELDER
HINWEIS:
Ihre Daten werden nur für interne Zwecke oder zwecks Weiterleitung an den für Sie zuständigen Reseller genutzt und unter keinen Umständen an Dritte weitergegeben.

+49 6102 7487-0   |       |    Haftungsausschluss   |    AGB   |    Sitemap   |    Impressum
Zuletzt aktualisiert am: 01.09.2016 - © 2016 by CROSS Industries AG
PRODUKTSUCHE:              SUCHE