Produkte - Suche -> "LA-2407"
Net Optics iLink Agg is the industry´s highest port density 1G link aggregator designed for monitoring applications, with 24 ports in a 1U form-factor. It enables a pool of up to 8 monitoring appliances to be connected to as many as 8 network links using integrated in-line Taps, or as many as 16 Span ports.
The iLink Agg is a key component for building a comprehensive, consolidated monitoring infrastructure in order to manage the performance and security of your network.
Fully Configurable Port Mapping
Net Optics iLink Agg combines selected traffic from up to eight 1G integrated network taps or 16 Span ports and directs traffic to the SFP monitor ports. You can monitor as many as 16 links or switches at one time with up to eight monitoring appliances. For additional flexibility, monitor ports can also be used as additional network ports and Span network ports can be used as additional monitor ports.
The iLink Agg supports fully configurable port mapping, enabling aggregation, regeneration, and matrix switching in a single device. Any-to-any and many-to-many port mappings are supported, and any port can be used as an input, an output, or both at the same time.
Easy to Configure, Secure and Manage
You can configure the iLink Agg through a command line interface (CLI), GUI and SNMP v3. TACACS+ and RADIUS perform authentication and authorization. RMON traffic statistics are available through the management interface and the SNMP MIBs.
No Dropped Packets
The iLink Agg scans incoming traffic from the network ports on a first-in-first-out basis. The scan rate is optimized to ensure that no packets are dropped, as long as the sum of data rates on the network ports does not exceed the monitoring port capacity of 1 Gbps.
The Net Optics iLink Agg provides connectivity to network links, Span ports, and monitoring tools with dissimilar media interfaces; simply plug the appropriate SFP transceivers into the iLink Agg. You can populate only those ports you need in order to control capital expenses, or provision extra ports to ensure uptime and port availability.
The iLink Agg has no IP address on the network, so it is immune to viruses or other attacks. The addressable management port is totally isolated from the network data path, and can be connected to a dedicated management subnet for increased security.
Doing Our Part
Net Optics is dedicated to ensuring user safety, and developing products that are environmentally friendly. The iLink Agg adheres to UL and CE safety certifications; FCC, VCCI, and C-Tick EMC certifications; and RoHS and WEEE environmental certifications.
No packets are dropped when the aggregated traffic to any monitor port does not exceed the monitor port bandwidth
Latency: 4.5µsec (1Gbps, 64-byte packet)
Hardware Throughput: 24Gbps
Dimensions: 1.75Â” high x 19Â” wide x 17Â” deep
Weight: 8.2 lbs (3.7 kg)
Hot-Swappable Redundant Power Supplies:
AC Input: 96-264VAC, 47-63Hz, 1.18A @ 120VAC
DC Input: -48VDC nominal, -36 to -72VDC, 4.7A @ -48VDC
Consumption: 70W (typical)
Monitoring Port: (8) SFP cages
Network Ports: (16) RJ45 10/100/1000
Management Ports: (1) RJ45 RS232 and (1) RJ45 10/100/1000
CLI local or SSH remote, Web UI, SNMPv3, SNMPv2, SNMPv1, RADIUS, TACACS+, RMON, DHCP
Pin 1-3 - Not used
Pin 4 - Ground
Pin 5 - RXD
Pin 6 - TXD
Pin 7 - CTS
Pin 8 - RTS
Operating Temperature: 0°C to 40°C
Storage Temperature: -10°C to 70°C
Relative Humidity: 10% min, 95% max, non-condensing
Safety: UL, CE, CB, CSA
Emissions and Immunity: FCC, EN
Environmental: RoHS, WEEE, Fully IEEE 802.3 compliant
- Twenty-four 1 G ports with fully configurable port mapping including Many-to-One, One-to-Many and Any-to-Any port mapping
- RMON statistics for each port through the management ports, locally or remotely
- Connectivity to network links, Span ports, and monitoring tools with dissimilar media
- No dropped packets
- SFP Flexibility
- All Net Optics products come standard with a 1 year manufacturerÂ’s warranty
- Additional service plan options to extend warranty coverage are available for purchase; see the Service Plan page for details
- LEDs indicate Link, Activity, and Power status
- Front-mounted connectors ease installation and operation
- Compatible with all major manufacturersÂ’ monitoring devices, including protocol analyzers, probes, firewalls, and intrusion detection and prevention systems