NP-Channel - Network Visibility & Test Solutions for Security, Network and Application Performance

SEARCH

Products > Network Taps

Network Taps provide 100% visibility into customers´ networks. Installed between any two network devices, Taps provide permanent and passive access points into the network.
<img src="https://www.network-visibility.com/pix/NT-Topol-ALT-Pic.jpg" style=" border:0px solid #0a2d6e; margin-left:auto; margin-right:auto; " alt="Network Diagram - Network Taps" title="Network Diagram - Network Taps" />
Network Tap - Topology
When a monitoring tool is needed, simply connect the device to the Network Tap instead of taking down the link, moving cables, and causing traffic interruptions. Even if Taps lose power, they are completely passive and feature fail-open technology that ensures traffic continuity. Network Taps pass all network traffic - including Layer 1 and 2 errors - without introducing bottlenecks or points of failure for 100% visibility.

FEATURES
  • Passive access at 10Mbps to 100Gbps without data stream interference
  • Zero Delay™ failover on power loss for 10/100/1000 models
  • Compatible with Power-over-Ethernet (PoE) applications
  • Redundant power supplies
  • Multiple split ratios available for fiber models
  • Secure single-direction traffic flow to monitoring ports
BENEFITS
  • View 100% of traffic - including VoIP, HTML, application, and layer 1 & 2 errors
  • Plug-and-play - no configuration required
  • Media conversion - "single-device" solutions (for example, TX to SX)
  • Permanent access port - avoids breaking a network link each time a tool is connected
  • Reliable - passive technology ensures maximum network uptime



Filter by Topology: Media type:
Vendor:

Network Taps - Product Photo - 1/10/40/100G Flex Tap™ Secure+ - Modular Fiber Tap /w LC
NEW / NEU / NEUVE / NUEVO
1/10/40/100G Flex Tap™ Secure+ - Modular Fiber Tap /w LC

Click to enlarge - Network Taps - Product Photo - 1/10/40/100G Flex Tap™ Secure+ - Modular Fiber Tap /w LC
The Ixia Flex Tap™ Secure+ provides an extra layer of security above that on Ixia's standard Flex Taps. Secure+ taps provide additional security by protecting the network from malicious or accidental traffic injection from the monitoring infrastructure and prevent disruption, while enabling continuous visibility of 100 percent of network traffic.

As with all of Ixia´s Flex Taps, the Secure+ is flexible, supports speeds up to 100G, and is 100 percent passive. Flex Tap Secure+ is available in single mode and with a 50/50 split ratio.

The Secure+ is purpose-built to block any data injected on the monitor ports, ensuring that accidental or intentional light/data injection is not possible.

With Flex Tap Secure+, users can implement up to 24 taps in a 1U rack space. The Secure+ is designed with the same form factor as Ixia's LC-model Flex Taps and can be deployed side by side with all existing Flex Taps from LC to BiDi to MTP models.


TPS-100-LR-85-50
 
Flex Tap Secure+, 1/10/40/100G, LR, 8.5µm, 50/50

Operating:
- Operating Temperature: 0° to 40°C
- Storage Temperature: -10° to 70°C
- Relative Humidity: 10% min, 95% max, non-condensing

Rack Mount Mechanical: Rack Dimensions: 1.7" High x 8.4" Deep x 19" Wide

Tap Mechanical: 1.6" High x 7.8" Deep x 0.7" Wide

Fiber Specs: 9/125µm; 1310nm

Connectors:
- Network Ports: 2 x Duplex LC
- Monitoring Ports: 1 x Duplex LC

Certifications: Fully RoHS-compliant

Guaranteed Security - Optical technology blocks all incoming data on the monitor ports, neutralizing all threats from affecting the network

High Density - Up to 24 fiber taps in 1U maximizes valuable data center real estate

Mix and Match - Uses Ixia's standard Flex Tap rackmount, enabling users to deploy a variety of Flex Taps without deploying a new rackmount

Fully Passive - Monitoring infrastructure does not impact network availability and reduces operating cost without adding management overhead

Network Taps - Product Photo - 1/10/40/100G Flex Tap - Modular Fiber Tap /w LC or MTP
HOT
1/10/40/100G Flex Tap - Modular Fiber Tap /w LC or MTP

Click to enlarge - Network Taps - Product Photo - 1/10/40/100G Flex Tap - Modular Fiber Tap /w LC or MTP
The Flex Tap is 100% passive Tap that can be deployed on any inline connection through out the network to provide permanent access to the network traffic. The Flex Tap is designed to fit up to 24 LC Taps or 12 MTP Taps in 1U. A unified rack mount and modular Tap design provide the capability to mix-and-match speeds, of 1/10/40/100G, and connectors, LC or MTP, within a single deployment for even greater flexibility.

High Density Modular Fiber Tap

The Ixia Flex Tap™ provide reliable continuous visibility of 100% of network traffic to support performance and security with no network performance degradation or disruption.

Flex Taps are flexible and scalable, each tap in the family is modular, can supports speeds up to 100G, and is 100 percent passive. Flex Taps are available in multimode and single mode fiber varieties with split ratios ranging from 50/50 up to 90/10. Depending on the model, the Flex Tap is available with either LC or MTP (MPO) connectors.

The design of the Flex Tap is optimized and tested for high-performance fiber networks ranging from 1G to 100G. Flex Taps are deployed at any inline connection on the network, therefore no additional overhead or management burden is added to the network devices to copy traffic for the monitoring/security infrastructure. The Flex Tap is compatible with all major manufacturers´ monitoring devices, including protocol analyzers, probes, and intrusion detection systems, and is protocol agnostic.


TP-100-LR-85-50
 
Flex Tap, Fiber, 1G, 10G, 40G, 100G, LR, 8.5um, LC, 50/50. 1310nm and 1550nm. Use RK-FLEX-24 rack mount

TP-100-LR-85-60
 
Flex Tap, Fiber, 1G, 10G, 40G, 100G, LR, 8.5um, LC, 60/40. 1310nm and 1550nm. Use RK-FLEX -24 rack mount

TP-100-LR-85-70
 
Flex Tap, Fiber, 1G, 10G, 40G, 100G, LR, 8.5um, LC, 70/30. 1310nm and 1550nm. Use RK-FLEX-24 rack mount

TP-100-LR-85-80
 
Flex Tap, Fiber, 1G, 10G, 40G, 100G, LR, 8.5um, LC, 80/20. 1310nm and 1550nm. Use RK-FLEX-24 rack mount

TP-100-LR-85-90
 
Flex Tap, Fiber, 1G, 10G, 40G, 100G, LR, 8.5um, LC, 90/10. 1310nm and 1550nm. Use RK-FLEX-24 rack mount

TP-1-SX-50-50
 
Flex Tap, Fiber, 1G, SX, 50um, LC, 50/50 - Use RK-FLEX-24 rack mount

TP-1-SX-50-60
 
Flex Tap, Fiber, 1G, SX, 50um, LC, 60/40 - Use RK-FLEX-24 rack mount

TP-1-SX-50-70
 
Flex Tap, Fiber, 1G, SX, 50um, LC, 70/30 - Use RK-FLEX-24 rack mount

TP-1-SX-50-80
 
Flex Tap, Fiber, 1G, SX, 50um, LC, 80/20 - Use RK-FLEX-24 rack mount

TP-1-SX-50-90
 
Flex Tap, Fiber, 1G, SX, 50um, LC, 90/10 - use RK-FLEX-24 rack mount

TP-1-SX-62-50
 
Flex Tap, Fiber, 1G, SX, 62.5um, LC, 50/50 - Use RK-FLEX-24 rack mount

TP-1-SX-62-60
 
Flex Tap, Fiber, 1G, SX, 62.5um, LC, 60/40 - Use RK-FLEX-24 rack mount

TP-1-SX-62-70
 
Flex Tap, Fiber, 1G, SX, 62.5um, LC, 70/30 - Use RK-FLEX-24 rack mount

TP-1-SX-62-80
 
Flex Tap, Fiber, 1G, SX, 62.5um, LC, 80/20 - Use RK-FLEX-24 rack mount

TP-1-SX-62-90
 
Flex Tap, Fiber, 1G, SX, 62.5um, LC, 90/10 - Use RK-FLEX-24 rack mount

TPX-10-SR-50-50
 
Low Insertion Loss Flex Tap, Fiber, 10G/1G, SR, 50um, LC, 50/50. Use RK-FLEX -24 rack mount

TPX-10-SR-50-60
 
Low Insertion Loss Flex Tap, Fiber, 10G/1G, SR, 50um, LC, 60/40. Use RK-FLEX-24 rack mount

TPX-10-SR-50-70
 
Low Insertion Loss Flex Tap, Fiber, 10G/1G, SR, 50um, LC, 70/30. Use RK-FLEX-24 rack mount

TPX-10-SR-50-80
 
Low Insertion Loss Flex Tap, Fiber, 10G/1G, SR, 50um, LC, 80/20. Use RK-FLEX -24 rack mount

TPX-40-SR-50-50-BD
 
Low Insertion Loss Flex Tap, Fiber, 40G, SR, 50um, LC, 50/50, Cisco BiDi. Use RK-FLEX-24 rack mount

TP-40-SR-50-70-MR4
 
Flex Tap, 40G, SR, 50um, 70:30, MR4 Support

TPX-40-SR-50-50-MTP
 
Low Insertion Loss Flex Tap, Fiber, 40G/4x10G, SR, 50um, MTP, 50/50 use RK-FLEX-24 rack mount

TPX-40-SR-50-70-MTP
 
Low Insertion Loss, Flex Tap, Fiber, 40G/4x10G, SR, 50um, MTP, 70/30. Use RK-FLEX -24 rack mount

TPX-100-SR-50-50-MTP
 
Low Insertion Loss Flex Tap, Fiber, 100G/12x10G, SR, 50um, MTP, 50/50. Use RK-FLEX -24 rack mount

TPX-100-SR-50-70-MTP
 
Low Insertion Loss Flex Tap, Fiber, 100G/12x10G, SR, 50um, MTP, 70/30. Use RK-FLEX -24 rack mount

TP-PACK-16-MM50
 
Flex Tap Rack (1) (RK-FLEX-24) along with (16) TPX-10-SR-50-50 Flex Taps plus 8 Spacer Units (RK-FLEX-SPACER)

TP-PACK-16-MM70
 
Flex Tap Rack (1) (RK-FLEX-24) along with (16) TPX-10-SR-50-70 Flex Taps plus 8 Spacer Units (RK-FLEX-SPACER)

TP-PACK-16-SM50
 
Flex Tap Rack (1) (RK-FLEX-24) along with (16) TP-100-LR-85-50 Flex Taps plus 8 Spacer Units (RK-FLEX-SPACER)

TP-PACK-16-SM70
 
Flex Tap Rack (1) (RK-FLEX-24) along with (16) TP-100-LR-85-70 Flex Taps plus 8 Spacer Units (RK-FLEX-SPACER)

TP-PACK-24-MM50
 
Flex Tap Rack (1) (RK-FLEX-24) along with (24) TPX-10-SR-50-50 Flex Taps

TP-PACK-24-MM70
 
Flex Tap Rack (1) (RK-FLEX-24) along with (24) TPX-10-SR-50-70 Flex Taps

TP-PACK-24-SM50
 
Flex Tap Rack (1) (RK-FLEX-24) along with (24) TP-100-LR-85-50 Flex Taps

TP-PACK-24-SM70
 
Flex Tap Rack (1) (RK-FLEX-24) along with (24) TP-100-LR-85-70 Flex Taps

Accessories
Network Analysis
savvius Omnipeek Enterprise Network Analysis  
QSFP+ break out cable, MTP to 4 Duplex LC
CKT-MTP-4LC-50-OM4 QSFP+ break out cable, MTP to 4 Duplex LC  
705-0027-001 Cable Kit, Cable Assembly, MTP/MTP, Multimode, OM4, 50µm  
LC/LC connector, Multimode 50µm LC/LC connector, Multimode 62,5µm LC/SC connector, Multimode 50µm LC/SC connector, Multimode 62,5µm
705-0012-001 LC/LC connector, Multimode 50µm  
705-0013-001 LC/LC connector, Multimode 62,5µm  
705-0015-001 LC/SC connector, Multimode 50µm  
705-0016-001 LC/SC connector, Multimode 62,5µm  
LC/LC connector, Singlemode 8,5µm LC/SC connector, Singlemode 8,5µm
705-0014-001 LC/LC connector, Singlemode 8,5µm  
705-0017-001 LC/SC connector, Singlemode 8,5µm  
Rack Mount Frame
RK-FLEX-24 Rack Mount Frame  
Spacer Unit/Rackmount for Flex Tap
RK-FLEX-SPACER Spacer Unit/Rackmount for Flex Tap  

Operating:
Operating Temperature: 0°C to 40°C
Storage Temperature: -10°C to 70°C
Relative Humidity: 10% min, 95% max, non-condensing

Mechanical:
Tap Dimensions: 1.63" High x 7.82" Deep x .66" Wide
Rack Dimensions: 1.74" High x 8.41" Deep x 19.0" Wide

Fiber Type:
Multimode:
Core Size: 50/125µm; Wavelength: 850nm/1300nm
Core Size: 62.5/125µm, Wavelength: 850/1300nm

Single mode:
Core Size: 8.5/125µm; Wavelength: 1310nm/1550nm

Connectors:
LC Network Ports: (2) Duplex LC connectors
LC Monitoring Port: (1) Duplex LC connector
MTP Network Ports: (2) MTP connectors, 12 Fiber or 24 Fiber
MTP Monitoring Port: (1) MTP connector, 12 Fiber or 24 Fiber


Split Ratios:

50/50 60/40 70/30 80/20 90/10
1/10/40/100G SM 3.7dB/
3.7dB
2.8 dB/
4.8 dB
2.0 dB/
6.1 dB
1.3 dB/
8.0 dB
0.8 dB/
12.0 dB
1G MM 4.5dB/
4.5dB
3.1 dB/
5.1 dB
2.4 dB/
6.3 dB
1.8 dB/
8.1 dB
1.3 dB /
11.5 dB
10G MM 3.9 dB/
3.9 dB
2.9 dB/
4.9 dB
2.2 dB/
6.1 dB
1.6 dB /
7.9 dB
1.0 dB /
11.3 dB
40G MM 4.4 dB/
4.4 dB
- 2.6 dB /
6.6 dB
- -
100G MM 4.4 dB/
4.4 dB
- 2.6 dB /
6.6 dB
- -


Certifications:
Fully RoHS compliant
Regulatory Certifications: UL, CE
MTP Regulatory Certifications: FCC, ICES , VCCI, EN55022, CISPR22, AS/NZS CISPR 22, EN55024, CISPR24


Passive, Secure Technology
  • Low insertion loss - minimize impact on data flows
  • Flex Tap is fully passive - monitoring infrastructure does not impact network availability
  • Does not modify traffic - tools see real copies of the packets from the network
  • High density - Save valuable rack real estate
  • Cost effective - avoid costly expenses managing SPAN ports
  • Each model is tested and optimized for 1 Gigabit, 10 Gigabit, 40 Gigabit, or 100 Gigabit speeds
  • Available in Single mode and Multimode
  • Requires no IP address and, as such, protects against attacks
  • Delivers total traffic visibility
  • Non-disruptive and transparent
  • Requires no power
  • Compatible with all protocols and monitoring devices
  • Quick, easy installation saves time with front-mounted connectors
  • Color coded Duplex LC connectors make fiber core identification quick and easy
  • High density design saves rack space, All-optical design, All split ratios available, 24 Taps in 1U

Network Taps - Product Photo - 100 Gigabit Fiber Network Tap
NEW / NEU / NEUVE / NUEVO
100 Gigabit Fiber Network Tap

Click to enlarge - Network Taps - Product Photo - 100 Gigabit Fiber Network Tap
The FTP-1534 will tap a 100GBase-SR4 network link, sending a copy of traffic from each device out 2 MTP ports in SR format. Uses 50 micron fiber. It provides your network monitoring and security tools with passive permanent access into your 100 Gigabit fiber network.

Completely passive fault tolerant design. Link access, anytime.

Ideal for permanent, 24x7 access to your fiber network for Network Analysis, IDS and monitoring applications.

100 Gigabit fiber taps from Datacom Systems provide your network monitoring and security tools passive permanent access into your 100GBASE-SR4 fiber network.

These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network, completely passive and faulttolerant, fiber taps will not affect network performance or integrity.

They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed.

Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports.


FTP-1534
 
100GBase-SR4 Fiber Network Tap

Accessories
RMC-12-3 12-Unit Rack Mount  
RMC-3 3-Unit Rack Mount Chassis  

NETWORK PORT: Two (2) 100Gb SR4 MTP Network Connections

MONITOR PORT: Two (2) 100Gb SR4 MTP Monitor Connections

SPLIT RATIO: 50/50, 70/30

INSERTION LOSS**:
50/50: 4.6 dB insertion loss
70/30: 6.6/2.6 dB insertion loss
**typical

PHYSICAL DIMENSIONS (H x W x D)
1.07 x 5 x 5 in.
(2.7 x 12.7 x 12.7 cm)

WEIGHT: 15 oz (0.43 kgs)

CERTIFICATIONS: CE, ROHS

FIBER TYPE: OM4

ENVIRONMENTAL:
Operating Temperature: 32° to 104°F (0° to 40°C)
Storage Temperature: -22° to 149°F (-30° to 65°C )
Humidity: 5 to 90% non-condensing

WARRANTY: Two (2) Year Standard Hardware Warranty

Product Description
FTP-1534 100Gb Passive TAP with 2 MTP style ports, to tap a 100GBase-SR4 fiber strand link. and output to 2 MTP style monitor ports, 50/50 or 70/30 split ratio. 50 micron fiber.

Optional Equipment
RMC-3 3-Unit Rack Mount
RMC-12-3 12-Unit Rack Mount

The FTP-1534 is completely passive and uses no electrical power. These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant, fiber taps will not affect network performance or integrity. They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed. Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports.
  • Non-powered, passive tap
  • Optional 1U rack mount holds 3 taps
  • 4U 12 bay rack available

Network Taps - Product Photo - 10/100/1000 Mbit Copper Network & Link Aggregation Tap
HOT
10/100/1000 Mbit Copper Network & Link Aggregation Tap

Click to enlarge - Network Taps - Product Photo - 10/100/1000 Mbit Copper Network & Link Aggregation Tap
The CTP-1000 tap can be installed between any two network devices, such as firewalls, routers, or switches, and allow traffic to flow between these network points. The tap makes a copy of the data flowing through it, and provides the packet copy to network appliances or tools for application, security or recording purposes.

Visibility for Single or Dual Interface Monitoring Solutions

The CTP-1000 tap can be installed between any two network devices, such as firewalls, routers, or switches, and allow traffic to flow between these network points. The tap makes a copy of the data flowing through it, and provides the packet copy to network appliances or tools for application, security or recording purposes.

Aggregation Mode
The CTP-1000 can combine the two full duplex network streams of data together into a single monitoring output. Aggregation mode allows a tool with a single port to monitor full duplex communication on a network link. In Aggregation mode, the tap creates identical copies of the aggregate data on the network tapped network link. This mode allows 2 tools to see the same data. Primary and secondary tools are often used with Aggregation mode, since they both see the same network packets.

Non-Aggregation Mode
Non-aggregating mode allows the port to run at full line rate, without dropping traffic. This option is a popular choice when security or packet analyzers need to see every packet. Analyzers and probes connected to 1 Gigabit links can typically only receive a maximum of 1 Gigabit per port. In cases where you want to receive at line rates on a network link, use the CTP-1000 in non-aggregating mode, but remember you need to use 2 ports on your monitoring device to watch both sides of the network link.

Regeneration
In Aggregation mode, the tap generates 2 copies of identical network traffic to provide multiple tools monitoring access to the same link. In addition to eliminating contention for access to critical links, multiple tools can be connected to the same link for redundancy, testing, or advanced monitoring applications.

Reliable and Easy to Use
Unlike setting up operating systems and binding NICs, the CTP-1000 is simple to deploy, and every unit comes with dual redundant power supplies to ensure monitoring uptime. A convenient switch on the back of the device allows users to choose between Aggregation and Non-Aggregation modes. After setting the aggregation switch, the device is plug and play. There is no other configuration or setup necessary for this easy to use, reliable device.

Security
The CTP-1000 does not have MAC addresses so it is essentially invisible to the network. Use the CTP-1000 when you want to collect and capture packets for a security or storage application. The copy of traffic into the security or monitoring tool is one-way, so the CTP-1000 won't become a point of access for hackers, nor can anyone get to the security probe or recording device through the tap (since the traffic is one way).

savvius Insight - Network Performance Monitoring Appliance for smaller Networks


Savvius Insight is the newest and smallest addition to the Omnipliance family of network monitoring appliances. Savvius Insight has no moving parts, connects inline to the network with two bypass ports, and has three extra ports for span port captures.

With the advanced expert system and extensive array of other visual and interactive analysis features built into Savvius Insight, network professionals, IT consultants, and Splunk administrators are armed with the same caliber of tools for monitoring smaller networks that they are used to having for the datacenter with Omnipliances. And like the larger Omnipliances, Savvius Insight performs all capture and analysis locally, and does not require the packets be sent over the network. Savvius Insight also enhances Omnipliance deployments by providing more capture points to take advantage of the built-in Multi-Segment Analysis features of the Omnipliance.

Features:
  • Saves money by having an affordable network monitoring appliance at every location
  • Provides remote troubleshooting and reporting capabilities 24x7 without requiring travel
  • Reduces mean time to resolution (MTTR) by providing advanced troubleshooting capabilities at the edge
  • Increases ROI of Omnipliance deployments through use of OmniPeek and MSA
  • Provides long term reporting through Splunk integration and Savvius for Splunk Dashboards
Data Sheet PDF-File DOWNLOAD Data Sheet

CTP-1000
 
10/100/1000 Mbit Copper Network & Link Aggregation Tap with 2x 10/100/1000 Monitoring Ports

Accessories
Network Performance Monitoring Appliance for smaller Networks
savvius Insight Network Performance Monitoring Appliance for smaller Networks  
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

PORTS:
- Network: One (1) 10/100/1000 Network Tap (RJ45)
- Monitoring: Two (2) 10/100/1000 Any-to-Any Ports (RJ45)

POWER REQUIREMENTS:
- Two (2) External AC Adapters (included)
- Input: 100-240 VAC, 50-60Hz, Max. 50mA at 120VAC

CERTIFICATIONS: CE, RoHS, CAN ICES-3 (A)/NMB-3(A), FCC Part 15 Class B

PHYSICAL DIMENSIONS (HxWxD): 1.07 x 5.00 x 5.00 in (2.7 x 12.72 x 12.7 cm)

WEIGHT: 12 oz. (0.34 kgs)

ENVIRONMENT:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C )
- Humidity: 5 to 90% non-condensing < 25 BTU/h

WARRANTY: One (1) Year Hardware Warranty

  • View entire full-duplex conversations using single-interface monitoring tools
  • Decrease reliance on switch resources for network management visibility. Eliminate SPAN port contention, oversubscription, and configuration errors
  • Deploy tools immediately without impacting your production network
  • Easily share tap ports for improved monitoring without maintenance windows 
  • Single point of deployment and remote management minimizes management expenses and MTTR
  • Easy to deploy- switch selects Aggregation/Non-aggregation mode

Network Taps - Product Photo - 10/100 Mbit Copper Network Tap
10/100 Mbit Copper Network Tap

Click to enlarge - Network Taps - Product Photo - 10/100 Mbit Copper Network Tap
The 10/100 Ethernet Tap is a single port device that provides a method to observe traffic on a full duplex Ethernet segment. The 10/100 Ethernet Tap provides easy access to segments while maintaining network integrity. Network performance will not be affected by power loss.

Ideal for security applications and anywhere you need non-intrusive, dedicated access to your network links

The 10/100 Ethernet Tap is a single port device that provides a method to observe traffic on a full duplex Ethernet segment.

The 10/100 Ethernet Tap provides easy access to segments while maintaining network integrity with “no break the link” design.
Network performance will not be affected by power loss.

  • Eliminates the need for network connectors to be disconnected and connected each time a segment needs to be analyzed
  • Non-intrusive, fault-tolerant, invisible to the network
  • Redundant power supply insures seamless monitoring even if the main power source is unavailable
  • Never lose packets from power failure - industry-leading “no break the link” design guarantees network traffic will continue to flow uninterrupted
  • View all traffic on both sides of full duplex links
  • Reduces degradation of switch performance due to port mirroring
  • View Layer 1 and 2 errors such as runts and CRC errors
  • Comes with convenient built-in rack-mount or use an optional rack-mount package to mount 3 units (at 1U) and up to 14 units (at 4U)
  • Passes all pairs
  • Supports Power over Ethernet (PoE)


10/100 AT
 
10/100 Mbit Copper/Ethernet Network Tap

Accessories
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

Network Connections: 10/100 Tap (RJ45)
Monitoring Connections: 10/100 (RJ45)

Power:
Two (2) External AC Adapters (included)
Input: 100-240 VAC, 50-60Hz, 0.8A

Dimensions (HxWxD):
1.07 X 5 X 5 in
2.7 X 12.7 X 12.7 cm

Weight: 8 oz. / 0,23 Kg

Environmental:
Operating Temperature: 32° to 104°F (0° to 40°C)
Storage Temperature: -22° to 149°F (-30° to 65°C)
Humidity: 5 to 90% non-condensing

Certifications: CE, RoHS

Warranty: Two (2) Year Standard Warranty

  • Eliminates the need for network connectors to be disconnected and connected each time a segment needs to be analyzed
  • Non-intrusive, fault-tolerant, invisible to the network
  • Redundant power supply insures seamless monitoring even if the main power source is unavailable
  • Never lose packets from power failure - design guarantees network traffic will continue to flow uninterrupted
  • View all traffic on both sides of full duplex links
  • Reduces degradation of switch performance due to port mirroring
  • View Layer 1 and 2 errors such as runts and CRC errors
  • Comes with convenient built-in rack-mount or use an optional rack-mount package to mount 3 units (at 1U) and up to 14 units (at 4U).
  • Passes all pairs
  • Supports Power over Ethernet (PoE)

Network Taps - Product Photo - 10/100/1000Base-T Zero Delay Network Tap
10/100/1000Base-T Zero Delay Network Tap

Click to enlarge - Network Taps - Product Photo - 10/100/1000Base-T Zero Delay Network Tap
Gig Zero Delay Tap is the industry's only 10/100/1000BaseT Tap with true zero-delay operation to prevent network disruptions for maximum network reliability. During a power outage, unique circuitry preserves the state of each network port ensuring the network link remains fully functional with zero packet loss; only monitor traffic becomes unavailable.

Gig Zero Delay Tap is the industry's only 10/100/1000BaseT Tap with true zero-delay operation to prevent network disruptions for maximum network reliability. During a power outage, unique circuitry preserves the state of each network port ensuring the network link remains fully functional with zero packet loss; only monitor traffic becomes unavailable.

With the Gig Zero Delay Tap, power glitches and failures no longer mean dropped packets and lengthy renegotiation sequences. The network operates more smoothly and critical business applications remain responsive with the Gig Zero Delay Tap in as part of a monitoring infrastructure.

Zero Delay - A Net Optics Breakthrough
Placing the Gig Zero Delay Tap in highly sensitive network locations can improve monitoring performance via the innovative features of Net Optics Taps. If power is lost to other 10/100/1000 Taps, the connected devices can introduce delays as they detect the power loss and try to re-establish their link.

The Zero Delay engineering breakthrough ensures that any loss of power to the Tap is transparent to the network, and does not affect the flow of traffic through the Tap - eliminating packet delay and packet loss as potential security or performance issues.

Transparent Access
Gig Zero Delay Taps establish permanent passive access ports without introducing a point of failure or disturbing other network connections. The Taps either auto-negotiate communication or fixed speed and duplexing parameters as determined by DIP switch settings. These passive Taps deliver full-duplex monitoring with zero impact on network traffic around the clock.

Security and Visibility
Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. The monitoring device connected to the Tap sees all full-duplex traffic as if it were in-line, including Layer 1 and Layer 2 errors.

Simply Plug It In
Full-duplex monitoring is a snap when each side of the signal is sent to a separate NIC on the monitoring device. All network and monitoring cables necessary for plug-and-play deployment are included with the Tap.

Reliability
For extra uptime protection, Net Optics Gig Zero Delay Taps offer redundant power connections. Should the primary power source fail, the Tap automatically switches to the backup power source. Power LEDs on the front of the Tap indicate the current power source.

Doing Our Part
We are dedicated to ensuring user safety, and developing products that are increasingly environment friendly. All of our 10/100/1000 Taps adhere to UL and CE safety certifications: FCC, VCCI, and C-Tick EMC certifications; and RoHS and WEEE environmental certifications.


TP-CU3-ZD
 
10/100/1000Base-T Network (Ethernet) Tap, with true Zero Delay operation in Gigabit

TP-CU3
 
10/100/1000Base-T Network (Ethernet) Tap

Accessories
Designed specifically for easy rack-mounting of Net Optics Taps. Accommodates three 4.5
RK-3V2 Designed specifically for easy rack-mounting of Net Optics Taps. Accommodates three 4.5" wide taps in a 1U frame.  
Designed specifically for easy rack-mounting of Net Optics Taps. Accommodates 12 4.5
RK-12V2 Designed specifically for easy rack-mounting of Net Optics Taps. Accommodates 12 4.5" wide taps in a 4U frame.  
12 Volt 350W 8-Lead Power Supply Module
PWR12-350-8L 12 Volt 350W 8-Lead Power Supply Module  
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

Operating:
Operating Temperature: 0°C to 40°C
Relative Humidity: 10% min, 95%max, non-condensing

Non-Operating:
Storage Temperature: -20°C to 70°C
Relative Humidity: 10% min, 95%max, non-condensing

Mechanical:
Dimensions: 1.1” high x 6.4” deep x 5.55” wide

Electrical:
Fully compatible with Power over Ethernet (PoE) applications
Power Consumption: 8W typical, 10W maximum
Redundant Power Supplies:
Input: 100-240VAC, 0.2A, 47-63Hz
Output:12VDC, 1.5A
DC Power Input: -36 VDC to -72 VDC, 0.4A, -48 VDC typical

Cable Interface:
Copper Cable Type:
22-24 AWG unshielded twisted pair cable, CAT5e
Link Distance Supported: 100 meters

Connectors:
Monitoring Ports: (2) RJ45, 8-pin connectors
Network Ports: (2) RJ45, 8-pin connectors

Certifications:
Safety: UL 60950, cUL 60950, CE, CB
Emissions and Immunity: FCC, EN, ICES - 003 Class A
Environmental: RoHS, WEEE, Fully IEEE 802.3 compliant

Passive, Secure Technology
  • Provides passive access at 10/100/1000 Mbps without data stream interference or introducing a point of failure
  • Permanent in-line installation without affecting network performance
  • Link Fault Detect prevents undetected link failures
  • Passes all full-duplex traffic (including errors) from all layers for comprehensive troubleshooting
  • No IP address is needed for the Tap or monitoring device, enhancing monitoring security
  • Compatible with Power over Ethernet (PoE) applications
  • Redundant power ensures monitoring uptime
  • Fully IEEE 802.3 compliant
  • Fully RoHS compliant
Ease of Use
  • LED indicators show redundant power and link status
  • DIP switches select auto-negotiation of fixed speed and duplexing settings for the Tap
  • Front-mounted connectors make installation and operation quick and easy
  • All network and monitoring cables included
  • Silk-screened application diagram illustrates all connections for easy deployment
  • Optional 19-inch rack frame holds up to 3 or 12 Taps
  • Tested and compatible with all major manufacturers’ monitoring devices, including protocol analyzers, probes, and intrusion detection/prevention systems

Network Taps - Product Photo - 10/100/1000 Mbit Copper Network Tap
10/100/1000 Mbit Copper Network Tap

Click to enlarge - Network Taps - Product Photo - 10/100/1000 Mbit Copper Network Tap
The 10/100/1000 Ethernet Tap provides easy 24 x 7 access to your 10/100 and Gigabit Ethernet network segments, making it an ideal portable network tap for troubleshooting Ethernet networks with multiple port speeds or for security monitoring applications, where you need non-intrusive, dedicated access to your network.

Ideal for security applications and anywhere you need non-intrusive, dedicated access to your network links

The 10/100/1000 Ethernet TAP from Datacom Systems provides easy 24x7 access to your Gigabit Ethernet segments.

A convenient DIP switch on the back of the tap can be used to select auto-negotiation at 10/100 or fixed speed and duplexing
settings at 1000Mbps. The 10/100/1000 Ethernet TapÂ’s fault tolerant design will help ensure that network performance and
integrity will not be affected by power loss.

  • Permanent In-Line access to 10/100/1000 Ethernet links- eliminates the need for network connectors to be disconnected and connected each time a segment needs to be analyzed or monitored
  • Redundant power supply insures seamless monitoring even if the main power source is unavailable
  • Ideal for Security and Monitoring applications
  • View ALL seven layers of network traffic
  • View ALL traffic on both sides of full duplex links
  • Comes with convenient built-in rack-mount or use an optional rack-mount package to mount 3 units (at 1U) and up to 14 units (at 4U)



10/100/1000 Ethernet Network Tap
 
10/100/1000 Mbit Copper Ethernet Network Tap

Accessories
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

Network Connections: 10/100/1000 Tap (RJ45)

Monitoring Connections: 10/100/1000 (RJ45)

Power:
- Two (2) External AC Adapters (included)
- Input: 100-240 VAC, 50-60Hz, 0.8A

Dimensions (HxWxD):
- 1.07 X 5 X 5 in
- 2.7 X 12.7 X 12.7 cm

Weight: 12 oz. (0,34 Kg)

Certifications: CE, ROHS

Environmental:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C)
- Humidity: 5 to 90% non-condensing

  • Permanent In-Line access to 10/100/1000 Ethernet links- eliminates the need for network connectors to be disconnected and connected each time a segment needs to be analyzed or monitored
  • Redundant power supply insures seamless monitoring even if the main power source is unavailable
  • Ideal for Security and Monitoring applications or as a portable network tap for troubleshooting different areas of your network that operate multiple Ethernet port speeds
  • View all seven layers of network traffic
  • View all traffic on both sides of full duplex links
  • Optional rack-mount package to mount 3 units (1U)

Network Taps - Product Photo - 1G Active Network Tap
1G Active Network Tap

Click to enlarge - Network Taps - Product Photo - 1G Active Network Tap
Niagara 3416 is a TAP system that is capable of fully monitoring 4 network segments at Gigabit speeds. The Niagara 3416 can support multiple configurations as well as supports copper, Multi-Mode fiber and Single-Mode fiber media. The system architecture is designed for flexibility and each segment can be configured to operate in various modes including aggregation, packet injection, multiple port monitoring and traffic filtering in layer 2, layer 3 and layer 4. The system supports a full suite of secure management including industry-standard management and logging tools.

Niagara 3416 is a TAP system that is capable of fully monitoring 4 network segments at Gigabit speeds. The Niagara 3416 can support multiple configurations as well as supports copper, Multi-Mode fiber and Single-Mode fiber media.
The system architecture is designed for flexibility and each segment can be configured to operate in various modes including aggregation, packet injection, multiple port monitoring and traffic filtering in layer 2, layer 3 and layer 4. The system supports a full suite of secure management including industry-standard management and logging tools.

The TAP features include two main TAP options, Split TAP Mode and Split TAP Link Aggregation Mode. Additionally, each TAP option can be configured to allow packet injection from the monitoring appliances.

The system provides flexible and intuitive CLI and GUI management features including secure web UI via an HTTPS connection, secure shell (SSH), SNMP, e-mail notification for special events, and failover method configuration.
An authentication client capable of interfacing with authentication servers like TACACS+ is integrated into the system. In addition, the TAP system possesses Syslog support, enabling consolidation of log data from various systems into a central repository.
This feature provides management, traceability and security auditing across a wide variety of devices and receivers on multiple platforms.


Niagara 3416-4TX
 
Four Copper Segments 1 Gigabit Link Aggregation TAP system, 1U form factor

Niagara 3416-3TX
 
Three Copper Segments 1 Gigabit Link Aggregation TAP system, 1U form factor

Niagara 3416-2TX
 
Two Copper Segments 1 Gigabit Link Aggregation TAP system, 1U form factor

Niagara 3416-TX
 
Single Copper Segment 1 GigabitLink Aggregation TAP system, 1U form factor

Niagara 3416-4SX
 
Four Multi-mode Fiber Segments 1 Gigabit Link Aggregation TAP system, 1U form factor

Niagara 3416-3SX
 
Three Multi-mode Fiber Segments 1 Gigabit Link Aggregation TAP system, 1U form factor

Niagara 3416-2SX
 
Two Multi-mode Fiber Segments 1 Gigabit Link Aggregation TAP system, 1U form factor

Niagara 3416-SX
 
Single Multi-mode Fiber Segment 1 Gigabit Link Aggregation TAP system, 1U form factor

Niagara 3416-4LX
 
Four Multi-mode Fiber Segments 1 Gigabit Link Aggregation TAP system, 1U form factor

Niagara 3416-3LX
 
Three Multi-mode Fiber Segments 1 Gigabit Link Aggregation TAP system, 1U form factor

Niagara 3416-2LX
 
Two Multi-mode Fiber Segments 1 Gigabit Link Aggregation TAP system, 1U form factor

Niagara 3416-LX
 
Single Multi-mode Fiber Segment 1 Gigabit Link Aggregation TAP system, 1U form factor

Niagara 3416-4SXTX
 
Four Multi mode to Copper Conversion Segments 1 Gigabit Link Aggregation TAP system, 1U form factor

Niagara 3416-4LXTX
 
Four Single mode Fiber to Copper Conversion Segments 1 Gigabit Link Aggregation TAP system, 1U form factor

Niagara 3416-4LXSX
 
Four Single mode Fiber to Multi Mode Fiber Conversion Segments 1 Gigabit Link Aggregation TAP system, 1U form factor

Accessories
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

Operating Temperature: 0 to 55 °C or 32 to 131 °F

Operating Humidity: 5 to 95%

Maximum Power Consumption: Less than 47 Watts

Airflow: 100 lf/m

Dimensions (LxHxW):
- 11.00 x 1.72 x 16.75 inches
- 279,40 x 44,50 x 425,50 mm

  • Split TAP, and Link aggregation TAP support
  • Packet Injection capabilities
  • Many-to-one TAP support
  • One-to-Many TAP support
  • High availability failover capabilities
  • Gigabit Copper, Multi Mode (SX) and Single mode (LX) support
  • Redundant power supplies for maximum reliability
  • Dedicated Management Port and Console Port
  • Extensive CLI and WEB based management
  • SSH and HTTPS for secure Management
  • Full RoHS compliance
  • TACACS+ authentication
  • Syslog support

Network Taps - Product Photo - FTP-1000 Series - 1G/10G Fiber Network Taps
FTP-1000 Series - 1G/10G Fiber Network Taps

Click to enlarge - Network Taps - Product Photo - FTP-1000 Series - 1G/10G Fiber Network Taps
1 and 10 Gigabit fiber taps from Datacom Systems provide your network monitoring and security tools passive permanent access into your 1 or 10 Gigabit fiber network. They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed. They also support multiple topologies, including 10 Gigabit Ethernet, ATM, OC3-OC48, and SONET.

Completely passive fault tolerant design. Links stay up even during outage or failure. Ideal for permanent, 24x7 access to your fiber network for Network Analysis, IDS and monitoring applications.

1 and 10 Gigabit fiber taps from Datacom Systems provide your network monitoring and security tools passive permanent access into your 1 or 10 Gigabit fiber network.

These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant, fiber taps will not affect network performance or integrity.

They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed. They also support multiple topologies, including 10 Gigabit Ethernet, ATM, OC3-OC48, and SONET.

Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports.
They are available in a wide array of split ratios, Multimode (SX) or Single-Mode (LX) configurations.
- Rack mount ear included
- Optional 1U rack mount holds 3 taps
- 4U 12 bay rack available


FTP-1504
 
50/50 50µ Fiber Tap (LC Connectors)

FTP-1505
 
50/50 62.5µ Fiber Tap (LC Connectors)

FTP-1506
 
50/50 9µ Fiber Tap (LC Connectors)

FTP-1704
 
70/30 50µ Fiber Tap (LC Connectors)

FTP-1705
 
70/30 62.5µ Fiber Tap (LC Connectors)

FTP-1706
 
70/30 9µ Fiber Tap (LC Connectors)

FTP-1510
 
50/50 50µ Fiber Tap (SC Connectors)

FTP-1511
 
50/50 62.5µ Fiber Tap (SC Connectors)

FTP-1512
 
50/50 9µ Fiber Tap (SC Connectors)

FTP-1710
 
70/30 50µ Fiber Tap (SC Connectors)

FTP-1711
 
70/30 62.5µ Fiber Tap (SC Connectors)

FTP-1712
 
70/30 9µ Fiber Tap (SC Connectors)

Accessories
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

NETWORK PORT: Ten (10) or One (1) Gigabit (LC or SC) Tap Network Connection
MONITOR PORT: Ten (10) or One (1) Gigabit (LC or SC) Monitoring Connection

SPLIT RATIO:
- 50/50, 70/30, 80/20
vAdditional Split Ratios Available

FIBER TYPE: OM3

INSERTION LOSS*:
- Multimode (choose 50/62.5 micron diameter) 50/50 = 4.2 dB
- Multimode (choose 50/62.5 micron diameter) 70/30 = 3.0 / 6.7 dB
- Singlemode (9 micron diameter) 50/50 = 3.9 dB
- Singlemode (9 micron diameter) 70/30 = 2.2 / 6.3 dB
* approximate per fiber

PHYSICAL DIMENSIONS (HxWxD): 1.07" x 5" x 5" (2,7 x 12,7 x 12,7 cm)

WEIGHT: 12 oz (0,34 Kg)

CERTIFICATIONS: CE, ROHS

ENVIRONMENTAL:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C )
- Humidity: 5 to 90% non-condensing

WARRANTY: Two (2) Year Standard Hardware Warranty

Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports
They are available in a wide array of split ratios, Multimode or Single-Mode configurations.
  • Rack mount ear included
  • Optional 1U rack mount holds 3 taps
  • 4U 12 bay rack available

Network Taps - Product Photo - FTP-2000/4000 Series - 1G/10G Dual/Quad Fiber Network Taps
FTP-2000/4000 Series - 1G/10G Dual/Quad Fiber Network Taps

Click to enlarge - Network Taps - Product Photo - FTP-2000/4000 Series - 1G/10G Dual/Quad Fiber Network Taps
Fiber network taps from Datacom Systems provide your network monitoring and security tools passive permanent access into your fiber network. Topology independent, they can be used for analysis of 10G or 1G network connections These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant.

These taps are topology independent and can be used for analysis of 10G or 1G network connections.

Fiber network taps from Datacom Systems provide your network monitoring and security tools passive permanent access into your fiber network. Topology independent, they can be used for analysis of 10G or 1G network connections.

These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant, fiber taps will not affect network performance or integrity.

Network taps provide permanent In-Line access to network links - eliminates the need for network connectors to be disconnected and connected each time a segment needs to be analyzed. Their completely passive fault tolerant design insures that your links stay up during power outage. They are ideal for permanent 24x7 access to your fiber network for Network Analysis, IDS and monitoring.

Dual Fiber tap units from Datacom Systems support multiple topologies. Provides complete access to your fiber links - our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports. They are available in a wide array of split ratios and conveniently rack-mountable in only 1RU (1.75").

The FTP 4000 is a 10G or 1G Quad Fiber Tap, providing permanent access into four fiber links. This network tap is ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network and non-powered, fiber TAPs will not affect network performance or integrity. Invisible to the network and non-powered, fiber TAPs will not affect network performance or integrity.

  • Passive, non-powered design
  • Four TAPs allow you to connect to one tool per link; tools require a dual NIC card to receive both sides of the conversation
  • Supports multiple topologies, including Gigabit Ethernet, ATM, OC3-OC192 and SONET
  • View layer 1 and 2 errors not seen when performing network monitoring using SPAN ports
  • Space saving design allows you to TAP up to eight links in 1U


FTP-2504
 
50/50 50µ Dual Fiber Tap

FTP-2505
 
50/50 62.5µ Dual Fiber Tap

FTP-2506
 
50/50 9µ Dual Fiber Tap

FTP-2704
 
70/30 50µ Dual Fiber Tap

FTP-2705
 
70/30 62.5µ Dual Fiber Tap

FTP-2706
 
70/30 9µ Dual Fiber Tap

FTP-4504
 
50/50 50µ Quad Fiber TAP

FTP-4505
 
50/50 50µ Quad Fiber TAP

FTP-4506
 
50/50 9µ Quad Fiber TAP

FTP-4704
 
70/30µ Quad Fiber TAP

FTP-4705
 
70/30µ Quad Fiber TAP

FTP-4706
 
70/30 9µ Quad Fiber TAP

Accessories
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

NETWORK PORTS:
FTP-2000: Two (2) Ten (10) or One (1) Gigabit (LC) Tap Network Connections
FTP-4000: Four (4) Ten (10) or One (1) Gigabit (LC) Tap Network Connections

MONITOR PORTS:
FTP-2000: Two (2) Ten (10) or One (1) Gigabit (LC) Monitoring Connections
FTP-4000: Four (4) Ten (10) or One (1) Gigabit (LC) Monitoring Connections

SPLIT RATIO:
- 50/50, 70/30, 80/20
- Additional Split Ratios Available

FIBER TYPE: OM3

INSERTION LOSS*:
- Multimode (choose 50/62.5 micron diameter) 50/50 = 4.2 dB
- Multimode (choose 50/62.5 micron diameter) 70/30 = 3.0 / 6.7 dB
- Singlemode (9 micron diameter) 50/50 = 3.9 dB
- Singlemode (9 micron diameter) 70/30 = 2.2 / 6.3 dB
* approximate per fiber

PHYSICAL DIMENSIONS (HxWxD):
FTP-2000: 1.07 x 5 x 5 in. (2,7 x 12,7 x 12,7 cm)
FTP-4000: 1.13 x 8.75 x 7.75 in. (2,9 x 22,2 x 19,7 cm)

WEIGHT:
FTP-2000: 12 oz. (0.34 Kgs)
FTP-4000: 1.10 lbs. (0.49 Kgs)

ENVIRONMENTAL:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C )
- Humidity: 5 to 90% non-condensing

CERTIFICATIONS: CE, ROHS

WARRANTY: Two (2) Year Standard Hardware Warranty

FTP-2000
  • Dual Fiber tap units from Datacom Systems support multiple topologies.
  • Provides complete access to your fiber links - our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports.
  • They are available in a wide array of split ratios and conveniently rack-mountable in only 1RU (1.75").
FTP-4000
  • Passive, non-powered design
  • Four TAPs allow you to connect to one tool per link; tools require a dual NIC card to receive both sides of the conversation
  • Supports multiple topologies, including Gigabit Ethernet, ATM, OC3-OC192 and SONET
  • View layer 1 and 2 errors not seen when performing network monitoring using SPAN ports
  • Space saving design allows you to TAP up to eight links in 1U

Network Taps - Product Photo - FTP-8000/9000 Series - 1G/10G High Density Fiber Network Tap
FTP-8000/9000 Series - 1G/10G High Density Fiber Network Tap

Click to enlarge - Network Taps - Product Photo - FTP-8000/9000 Series - 1G/10G High Density Fiber Network Tap
This passive tap provides permanent access into 24, 10 and 1 gigabit fiber links. This high density fiber tap is ideal for security, network monitoring, end to end performance analysis and other applications where you need to have a high number of links simultaneously monitored. It is ideal for large corporate data centers, cloud or communication service providers, or high performance computing environments. Use this tap, anyplace where there is a high density of links that have to be monitored.

High Density Fiber Tap for 10G and 1G Links

Ideal for security applications, network monitoring, and end-to-end performance analysis

FTP-8000
The FTP-8000 passive tap provides permanent access into eight, 10G and 1G fiber links. This high density fiber tap is ideal for security, network monitoring, end to end performance analysis and other applications where you need to have a high number of links simultaneously monitored. It is suited for large corporate data centers, cloud or communication service providers, or high performance computing environments. It is ideal for any place where there is a high density of links that have to be monitored. It has a low impact on network performance and, due to its passive nature, does not affect reliability.

  • Space saving design allows you to TAP up to eight (8) links in 1/2 rack unit of height or sixteen (16) links by using 1 rack unit
    of height - optimizes data center rack usage
  • Integrates easily with our network monitoring switches - deploy when 4 or more ports are required
  • Passive, non-powered architecture - highly reliable and proven architecture
  • Alternative to SPAN ports - captures all traffic including error packets that SPANs may drop
  • Available with various split ratios
FTP-9000
This passive tap provides permanent access into 24, 10 and 1 gigabit fiber links. This high density fiber tap is ideal for security, network monitoring, end to end performance analysis and other applications where you need to have a high number of links simultaneously monitored. It is ideal for large corporate data centers, cloud or communication service providers, or high performance computing environments.
Use this tap anyplace where there is a high density of links that have to be monitored. It has a very low impact on network performance and due to its passive nature does not affect reliability.


FTP-8504
 
50/50 Fiber TAP (50µ)

FTP-8505
 
50/50 Fiber TAP (62.5µ)

FTP-8506
 
50/50 Fiber TAP (9µ)

FTP-8704
 
70/30 Fiber TAP (50µ)

FTP-8705
 
70/30 Fiber TAP (62.5µ)

FTP-8706
 
70/30 Fiber TAP (9µ)

FTP-9504
 
50/50 Fiber TAP (50µ)

FTP-9505
 
50/50 Fiber TAP (62.5µ)

FTP-9506
 
50/50 Fiber TAP (9µ)

FTP-9704
 
70/30 Fiber TAP (50µ)

FTP-9705
 
70/30 Fiber TAP (62.5µ)

FTP-9706
 
70/30 Fiber TAP (9µ)

Accessories
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

NETWORK PORTS:
FTP-8000: Eight (8) Ten (10) or One (1) Gigabit (LC) Tap Network Connections
FTP-9000: Twenty four (24) Ten (10) or One (1) Gigabit (LC) Tap Network Connections

MONITOR PORTS: Eight (8) Ten (10) or One (1) Gigabit (LC) Monitoring Connections

SPLIT RATIO:
- 50/50, 70/30, 80/20
- Additional Split Ratios Available

FIBER TYPE: OM3

INSERTION LOSS*:
- Multimode (choose 50/62.5 micron diameter) 50/50 = 4.2 dB
- Multimode (choose 50/62.5 micron diameter) 70/30 = 3.0 / 6.7 dB
- Singlemode (9 micron diameter) 50/50 = 3.9 dB
- Singlemode (9 micron diameter) 70/30 = 2.2 / 6.3 dB
* approximate per fiber

PHYSICAL DIMENSIONS (H x W x D):
FTP-8000: 0.875 x 17 x 8 in (2,2 x 43,2 x 20,3 cm)
FTP-9000: 1.73 x 18 x 8 in (4,4 x 45,7 x 20,3 cm)

WEIGHT:
FTP-8000: 4 lbs. (1,82 Kg)
FTP-9000: 8.0 lbs (3,63 Kg)

CERTIFICATIONS: CE, ROHS

ENVIRONMENTAL:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C )
- Humidity: 5 to 90% non-condensing

WARRANTY: Two (2) Year Standard Hardware Warranty

  • FTP-8000: Space saving design allows you to TAP up to eight (8) links in 1/2 rack unit of height or sixteen 16 links by using 1 rack unit of height - optimizes data center rack usage Integrates easily with our network monitoring switches - deploy when 4 or more ports are required
  • FTP-9000: Space saving design allows you to tap up to twenty four (24) links in 1 rack unit of height - optimizes data center rack usage
  • Passive, non-powered architecture - highly reliable and proven architecture
  • Alternative to SPAN ports - captures all traffic including error packets that SPANs may drop
  • Available with various split ratios
  • Ruggedized D handles for easy installation

Network Taps - Product Photo - Niagara 5002-8 - 10G Bypass Switch, Tap, NPB, DPI
Niagara 5002-8 - 10G Bypass Switch, Tap, NPB, DPI

Click to enlarge - Network Taps - Product Photo - Niagara 5002-8 - 10G Bypass Switch, Tap, NPB, DPI
Niagara 5002-8 is a special function product that aids in enhancing network visibility. This product performs time-stamping and de-duplication in additions to packet slicing and load-balancing.

4 Segment Modular Intelligent Active Bypass and TAP

PLUG & PLAY
The Niagara 5002-8 is a network appliance that performs time-stamping, de-duplication, packet slicing, flow slicing, and flow-based load balancing. The load balancing is done with tunnel parsing based on the passenger packet. This system comes equipped with up to eight ports of 10G fiber with a management port. This system can handle up to 80Gbps of bidirectional traffic.
Packet slicing and flow slicing are features required and utilized by network monitoring, network forensics, network security and deep packet inspection (DPI) systems. Flexible packet slicing minimizes the amount of data required to be stored and processed on the networking tools while allowing the appliance to perform its functionality. Flow slicing provides better control of traffic and reduces the load for DPI tool when inspecting flows and protocols.
De-duplication eliminates multiple copies of packets, to reduce the amount of data that needs to be put into storage or transferred to monitoring devices within the network. Time-stamping is essential for network forensics and security applications. For performance monitoring, as more transactions occur on a network, time-stamping becomes necessary in order to be able to pinpoint where communication delays or latencies are happening, which allows for the network to be optimized. The Niagara 5002-8 is designed to run in conjunction with a broad range of applications, including security, performance monitoring, networking forensics, lawful intercept, storage and data center server appliances.


Niagara 5002-8
 
10G Bypass Switch, Tap, Network Packet Broker, Deep Packet Inspection (DPI)

Operating Temperature: 0 to 40°C or 32 to 104°F

Operating Humidity: 5 to 95%

Maximum Power Consumption: Less than 47 W

Airflow: 100 lf/m

Dimensions (LxHxW):
- 12.00 x 1.75 x 16.75 inches
- 279,4 x 44,5 x 425,5 mm

Key Features and Components
  • Time stamping at 10G rates at Nano-second granularity
  • Packet De-duplication per flow
  • Load Balancing
  • Tunnel handling, supported during Load-balancing
    • VLAN
    • Q-Q
    • MPLS, Multi MPLS
    • IP-in-IP
    • GTP-U
    • GRE-1/2
  • Configurable Flow Slicing and Packet Slicing
  • Eight dual speed SFP+ Ports (SR or LR)
  • Two Redundant hot pluggable power supplies
  • One Management
  • 1U chassis
  • Full RoHS Compliance
  • EMC, FCC Class A, UL (Safety) Certifications

Network Taps - Product Photo - 40G Fiber Network Tap
40G Fiber Network Tap

Click to enlarge - Network Taps - Product Photo - 40G Fiber Network Tap
40 Gigabit fiber taps from Datacom Systems provide your network monitoring and security tools passive permanent access into your 40 Gigabit fiber network. They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed.

FTP-1518 Series Fiber Tap for Cisco 40G BiDi Links
Completely passive fault tolerant design. Monitor 40G Bidirectional links. Ideal for permanent, 24x7 access to your fiber network for Network Analysis, IDS and monitoring applications.
40 Gigabit fiber taps from Datacom Systems provide your network monitoring and security tools passive permanent access into your 40 Gigabit fiber network. The FTP-1518 will tap a Cisco 40G BiDi network link, sending a bidirectional copy of traffic from each device out a set of 4 LC monitoring ports. The FTP-1518 gives you to access a each wavelength of the fiber connection for monitoring using 40G receive only QSFPs.*
Each monitor port transmits a copy of traffic from a single direction on the fiber. All incoming traffic that is received on the network ports is also copied to the respective monitor port. The FTP-1518 is completely passive and uses no electrical power. These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only
an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant, fiber taps will not affect network performance or integrity.
They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed.
Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports
* monitoring device must support these receivers


FTP-1514/FTP-1714 are ideal for permanent, 24x7 access to your fiber network for Network Analysis, IDS and monitoring applications
40 Gigabit fiber taps from Datacom Systems provide your network monitoring and security tools passive permanent access into your 40 Gigabit fiber network.
These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant, fiber taps will not affect network performance or integrity.
They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed. Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports.


FTP-1516 - Completely passive fault tolerant design. Monitor 40G multi wavelength links.
Ideal for permanent, 24x7 access to your fiber ne work for Network Analysis, IDS and monitoring applications.
40 Gigabit fiber taps f om Datacom Systems provide your network monitoring and security tools passive permanent access into your 40 Gigabit fiber ne work.
The FTP-1516 will tap a 40GBase-LR4 network link, sending a copy of traffic om each device on each wavelength out 4 LC ports in LR format. The FTP-1516 allows you to access a multi-lambda fiber onnection and monitor it by combining 4 SFP+ single wavelength ports into one native 40GbE interface on your monitoring devices.*
Monitor outputs are at 1271, 1291, 1311 and 1331nm. The FTP-1516 is completely passive and uses no electrical power.
These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant, fiber taps will not a ect network performance or integrity.
They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed.
Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports.


FTP-1518
 
40Gb 40Gb Passive TAP with 4 LC style ports to tap a 40G BiDi fiber link, and output to 4 LC style monitor ports.50/50 split ratio. 50 micron fiber

FTP-1514
 
40Gb Passive TAP with 2 MTP ports, to tap a 12 fiber strand link. 50/50 split ratio. 50 micron fiber, with 2 separate MTP output ports

FTP-1714
 
40Gb Passive TAP with 2 MTP ports, to tap a 12 fiber strand link. 70/30 split ratio. 50 micron fiber, with 2 separate MTP output ports

FTP-1516
 
40Gb Passive TAP with 2 LR4 LC style ports, to tap a 40GBASE-LR4 fiber strand link. and output to 8 LC style monitor ports, 50/50 split ratio. 9µ fiber, with 8 separate LC output ports (2 for each wavelength)

Accessories
RMC-2 2-TAP 1U Rack Mount Chassis  
RMC-12-2 12-TAP 6U Rack Mount Chassis  
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

FTP-1518


NETWORK PORT: Two (2) Cisco Bidi 40Gb Network Connections

MONITOR PORT: Four (4) LC Monitor Connections

SPLIT RATIO: 50/50

INSERTION LOSS**:
- Network Ports: 3.8 dB insertion loss
- Monitor Ports: 3.8 dB insertion loss
**typical

PHYSICAL DIMENSIONS (H x W x D):
- 1.07 x 5 x 5 in.
- (2.7 x 12.7 x 12.7 cm)

WEIGHT: 12 oz. (0.34 kgs)

CERTIFICATIONS: CE, ROHS

FIBER TYPE: OS2

ENVIRONMENTAL:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C )
- Humidity: 5 to 90% non-condensing

WARRANTY: Two (2) Year Standard Hardware Warranty


FTP-1514/FTP-1714


NETWORK PORT: Two (2) 40Gb MTP Network Connections

MONITOR PORT: Two (2) 40Gb MTP Monitoring Connections

SPLIT RATIO: 50/50 & 70/30

FIBER TYPE: OM3

INSERTION LOSS*:
- 50/50 split ratio results in a 4.6 dB insertion loss
- 70/30 split ratio results ina a 6.6/2.6 dB insertion loss

* approximate per fiber

FIBER TYPE: OM3

PHYSICAL DIMENSIONS (HxWxD): 1.07 x 5 x 7 in (2.7 x 12.7 x 17.78 cm)

WEIGHT: 15 oz (0,43 Kg)

CERTIFICATIONS: CE, ROHS

ENVIRONMENTAL:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C )
- Humidity: 5 to 90% non-condensing

WARRANTY: Two (2) Year Standard Hardware Warranty


FTP-1516


NETWORK PORT: Two (2) 40Gb LR4 Network Connections

MONITOR PORT: Eight (8) LC Monitor Connections

SPLIT RATIO: 50/50

INSERTION LOSS**:
- Network Ports: 3.4 dB insertion loss
- Monitor Ports: 3.7 dB insertion loss

**typical

PHYSICAL DIMENSIONS (HxWxD): 1.13 x 8.75 x 7.75 in. (2.86 x 22.22 x 19.69 cm)

WEIGHT: 1.10 lbs (0.49 kgs)

CERTIFICATIONS: CE, ROHS

FIBER TYPE: OS2

ENVIRONMENTAL:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C )
- Humidity: 5 to 90% non-condensing

WARRANTY: Two (2) Year Standard Hardware Warranty

FTP-1518
Monitor outputs are at 850 and 900nm. The FTP-1518 is completely passive and uses no electrical power.

These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant, fiber taps will not affect network performance or integrity.

They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed. Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports.

- Non-powered, passive tap
- Optional 1U rack mount holds 2 taps
- 6U 12 bay rack available

FTP-1514/FTP-1714
Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports
- OM3 fiber
- Rack mount ear included
- Optional 1U rack mount holds 3 taps
- 4U 12 bay rack available

FTP-1516
Monitor outputs are at 1271, 1291, 1311 and 1331nm. The FTP-1516 is completely passive and uses no electrical power.
These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant, fiber taps will not affect network performance or integrity.
They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed.
Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports.
- Non-powered, passive tap
- Optional 1U rack mount holds 2 taps
- 6U 12 bay rack available

*monitoring device must support this feature

FTP-1518
Data Sheet PDF-File Data Sheet
FTP-1518
Installation Guide PDF-File Install Guide
FTP-1514/1714
Data Sheet PDF-File Data Sheet
FTP-1514/1714
Installation Guide PDF-File Install Guide
FTP-1516
Data Sheet PDF-File Data Sheet
FTP-1516
Installation Guide PDF-File Install Guide

Network Taps - Product Photo - 1/10/40G Modular Passive Fiber Network Tap
1/10/40G Modular Passive Fiber Network Tap

Click to enlarge - Network Taps - Product Photo - 1/10/40G Modular Passive Fiber Network Tap
The Niagara 3225PT is a modular 1Gb, 10Gb and 40Gb twenty-five segment passive TAP that supports full duplex, zeropacket loss, passive monitoring and is available in single-mode and multi-mode fiber.
The unit performs the tap operation passively in stealth operation and requires no power supply. As a plug and play system, the system is easy to setup.

The Niagara 3225PT is a modular 1Gb, 10Gb and 40Gb twenty-five segment passive TAP that supports full duplex, zeropacket loss, passive monitoring and is available in single-mode and multi-mode fiber.
The unit performs the tap operation passively in stealth operation and requires no power supply. As a plug and play system, the system is easy to setup. Niagara 3225PT provides a copy of data flowing across a computer network to out of band security tools including:

  • Intrusion Detection Systems (IDS)
  • Sniffers/Probes
  • Network Data Recorder
  • Application performance monitor
  • Traffic Analyzers
  • Network Performance Monitor


Niagara 3225PT Chasis
 
1U Enclosure only, can accommodate up to 25 modules

Niagara 3201S-1G-SX
 
1 segment 1G passive TAP multi mode (need to specify split ratio 10/90 20/80 30/70 40/60 50/50)

Niagara 3201S-1G-LX
 
1 segment 1G passive TAP single mode (need to specify split ratio 10/90 20/80 30/70 40/60 50/50)

Niagara 3201S-10G-SR
 
1 segment 10G passive TAP multi mode (need to specify split ratio 10/90 20/80 30/70 40/60 50/50)

Niagara 3201S-10G-LR
 
1 segment 10G passive TAP single mode (need to specify split ratio 10/90 20/80 30/70 40/60 50/50)

Niagara 3201W-40G-SR
 
40G Multi mode segment, 2 slots

Niagara 3201S-40G-LR
 
40G Single mode segment, 1 slot

Accessories
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

Storage Temperature: -45°C to 70°C

Relative Humidity: 5% min, 95% max, non-condensing

Dimensions (LxHxW):
- 7.64 x 1.75 x 16.73 inches
- 194,00 x 44,45 x 425,00 mm

Key Features
The Optical split ration can be selected from a range of values and is factory configurable as follows:
  • 90% Network ports - 10% TAP port
  • 80% Network ports - 20% TAP port
  • 70% Network ports - 30% TAP port
  • 60% Network ports - 40% TAP port
  • 50% Network ports - 50% TAP port
System Characteristics
  • Supports LC connectors
  • Support for SR, LR, SX, LX and QSFP
  • 1U Rackmountable chassis

Network Taps - Product Photo - 100G Fiber Network Tap
100G Fiber Network Tap

Click to enlarge - Network Taps - Product Photo - 100G Fiber Network Tap
The FTP-1546 will tap a 100GBase-LR4 network link, sending a copy of traffic from each device out 2 LC ports in LR format. Uses 9 micron fiber. It provides your network monitoring and security tools with passive permanent access into your 100 Gigabit fiber network.

FTP-1546 Series for 100GBase-LR4 Links

Completely passive fault tolerant design - Monitor 100G multi wavelength links

Ideal for permanent, 24x7 access to your fiber network for Network Analysis, IDS and monitoring applications.

100 Gigabit fiber taps from Datacom Systems provide your network monitoring and security tools passive permanent access into your 100 Gigabit fiber network.
The FTP-1546 will tap a 100GBase-LR4 network link, sending a copy of traffic from each device 2 LC portsin LR format.

Monitor outputs include each wavelength: 1295.56, 1300.05, 1304.59 and 1309.14nm. The FTP-1546 is completely passive and uses no electrical power. These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant, fiber taps will not affect network performance or integrity.

They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed.

Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports.


FTP-1546
 
100Gb Passive TAP with 2 LR4 LC style ports, to tap a 100GBASE-LR4 fiber strand link. and output to 2 LC style monitor ports, 50/50

Accessories
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

NETWORK PORT: Two (2) 100Gb LR4 LC Network Connections

MONITOR PORT: Two (2) 100Gb LR4 LC Monitor Connections

SPLIT RATIO: 50/50

INSERTION LOSS**:
- Network Ports: 4.0 dB insertion loss
- Monitor Ports: 3.5 dB insertion loss
**typical

PHYSICAL DIMENSIONS (H x W x D):
- 1.07 x 5 x 5 in.
- (2.7 x 12.7 x 12.7 cm)

WEIGHT: 12 oz (0.34 kgs)

CERTIFICATIONS: CE, ROHS

ENVIRONMENTAL:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C )
- Humidity: 5 to 90% non-condensing

WARRANTY: Two (2) Year Standard Hardware Warranty

Product Description:
FTP-1546 100Gb Passive TAP with 2 LR4 LC style ports, to tap a 100GBASE-LR4 fiber strand link. and output to 2 LC style monitor ports, 50/50 split ratio. 9 micron fiber.

Optional Equipment:
- RMC-3 3-Unit Rack Mount
- RMC-12-3 12-Unit Rack Mount

Tapped and monitor wavelengths are at 1295.56, 1300.05, 1304.59 and 1309.14nm in complaince with the 100GBASE-LR4 standard. The FTP-1546 is completely passive and uses no electrical power. These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant, fiber taps will not affect network performance or integrity. They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed. Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports.
  • Non-powered, passive tap
  • Optional 1U rack mount holds 3 taps
  • 4U 12 bay rack available

Multimode
Singlemode

PRICE REQUEST





*:
3+6=
* MANDATORY INFO.
NOTE:Your data will only be used for internal purposes or - if required - for forwarding to your responsible reseller. It will never be given to any other third party under any circumstances.
+49 6102 7487-0   |       |    Disclaimer   |    General Terms & Conditions   |    Sitemap   |    Imprint
© 2016 by Pierer Industrie AG
PRODUCT SEARCH:              SEARCH