Products - Search -> "LA-2410"
Net Optics iLink Agg is a 1G link aggregator that combines traffic from multiple network links or Span ports into one single interface and sends it to monitoring tools across the network. After aggregation, the traffic is regenerated to up to 24 monitoring ports. With up to 24 ports in a 1U form-factor, iLink Agg enables a pool of up to 8 monitoring appliances to be connected to as many as 8 network links using integrated in-line Taps, plus as many as 8 Span ports. This helps eliminating resource contention by enabling up to eight devices to monitor identical traffic at the same time and Improves monitoring flexibility with fully configurable port mappings.
An additional big advantage of the iLink Agg is that the connected monitoring system needs only one network interface controller (NIC) to monitor all 12 connections at the same time. The iLink Agg is perfectly designed for the analysis of asymmetric network traffic and redundant routes with dynamic network protocols.
Aggregation, Regeneration and Port Mapping
The iLink Agg supports fully configurable port mapping, enabling aggregation, regeneration, and matrix switching in a single device. Any-to-any and many-to-many port mappings are supported, and any port can be used as an input, an output, or both at the same time.
Ease of Use
The iLink Agg can be managed locally or remotely through a command line interface (CLI), Web UI and SNMP v3. TACACS+ and RADIUS perform authentication and authorization. RMON traffic statistics are available through the management interface as well as remote software updates.
Zero Dropped Packets
The iLink Agg scans incoming traffic from the network ports on a first-in-first-out basis. The scan rate is optimized to ensure that no packets are dropped, as long as the sum of data rates on the network ports does not exceed the monitoring port capacity of 1 Gbps.
Net Optics iLink Agg provides connectivity to network links, Span ports, and monitoring tools with different fiber and copper media types. You can populate only those ports you need or provision extra ports to ensure uptime and port availability.
The iLink Agg has no IP address on the network, so it is immune to viruses or other attacks. The addressable management port is totally isolated from the network data path, and can be connected to a dedicated management subnet for increased security.
The iLinkAgg is compatible with all Net Optics Taps and bypass switches, as well as with all major manufacturers´ monitoring devices, including protocol analyzers, probes, firewalls, and intrusion detection/prevention systems.
No packets are dropped when the aggregated traffic to any monitor port does not exceed the monitor port bandwidth
Latency: 4.5µsec (1Gbps, 64-byte packet)
Dimensions: 1.75Â” high x 19Â” wide x 17Â” deep
Weight: 11 lbs (5 kg)
Hot-Swappable Redundant Power Supplies:
AC Input: 96-264VAC, 47-63Hz, 1.18A @ 120VAC
DC Input: -48VDC nominal, -36 to -72VDC, 4.7A @ -48VDC ,
Consumption: 70W (typical)
Ports: (24) SFP slots
Management Ports: (1) RJ45 RS232 and (1) RJ45 10/100/1000
Management: CLI local or SSH remote, Web UI, SNMPv3, SNMPv2, SNMPv1, RADIUS, TACACS+, RMON, DHCP
Operating Temperature: 0°C to 40°C
Storage Temperature: -10°C to 70°C
Relative Humidity: 10% min, 95% max, non-condensing
Safety: UL, CE, CB, CSA
Emissions and Immunity: FCC, EN
Environmental: RoHS, WEEE, Fully IEEE 802.3 compliant
All Net Optics products come standard with a 1 year manufacturer´s warranty
Additional service plan options to extend warranty coverage are available for purchase; see the Service Plan page for details
- Twenty-four 1 G ports with fully configurable port mapping including Many-to-One, One-to-Many and Any-to-Any port mapping
- RMON statistics for each port through the management ports, locally or remotely
- Connectivity to network links, Span ports, and monitoring tools with dissimilar media
- No dropped packets
- SFP Flexibility
- Intuitive and simple web based user interface enables quick graphical device configuration, monitoring and management.
- All Net Optics products come standard with a 1 year manufacturerÂ’s warranty
- Additional service plan options to extend warranty coverage are available for purchase; see the Service Plan page for details
- LEDs indicate Link, Activity, and Power status
- Front-mounted connectors ease installation and operation
- Compatible with all major manufacturersÂ’ monitoring devices, including protocol analyzers, probes, firewalls, and intrusion detection and prevention systems