NP-Channel - Network Visibility & Test Solutions for Security, Network and Application Performance

CERCA

Prodotti > Network Packet Broker (NPB)

Network Packet Brokers (Smart filtering appliances) direct traffic of interest to monitoring tools in order to relieve oversubscription, leverage tool investment across groups, and centralize monitoring in the NOC.
These advanced network controller and data monitoring switches feature:
  • Tap, aggregation, regeneration, matrix switching, and smart filtering in a single device
  • Deep Packet Inspection (DPI), static and dynamic load balancing, and snapshot packet capture
  • Fast ProPush™ statistics for microburst detection
  • Low-latency, hardware-based TapFlow™ filtering engine
  • 10 Mbps to 100 Gbps operation
  • Inline and SPAN network modules
  • Dual, hot-swappable power supplies

Get Adobe Flash player

Aggregates
Aggregates
Regenerates
Regenerates
Switches
Switches
Filters
Filters
Load Balances
Load Balances


Filtra Topologia: Media type:
Vendor:

Director - Foto Prodotto - Vision ONE - 1G/10G/40G Network Packet Broker
NEW / NEU / NEUVE / NUEVO
Vision ONE - 1G/10G/40G Network Packet Broker

Clicca per ingrandire - Director - Foto Prodotto - Vision ONE - 1G/10G/40G Network Packet Broker
IT and security operations teams use Vision ONE™ to get complete visibility into traffic and applications on their network. The first step to better security is getting visibility of all packets across the network. Vision ONE delivers the high-performance loss-less visibility you need to get the most from your security and monitoring tools.

Security without Sacrifice

IT and security operations teams use Vision ONE™ to get complete visibility into traffic and applications on their network. The first step to better security is getting visibility of all packets across the network. Vision ONE delivers the high-performance loss-less visibility you need to get the most from your security and monitoring tools.

Vision ONE combines the best advanced visibility functions into a single appliance. Whether you need to see everything on your network, fight against threats hiding in encrypted traffic, deploy a best-of-breed combination of security tools, or feed the right data to your forensic solutions, Vision ONE is the answer.

Vision ONE combines the best of Ixia technology to address the 6 major challenges every enterprise faces in amplifying their security:

  • The ability to see everything - Because IT can't fight what they can't see
  • Look inside encrypted traffic - Gartner states that by 2017, more than half of the attacks targeting enterprises will use encrypted traffic to bypass controls (Gartner report: Security Leaders Must Address Threats from Rising SSL Traffic)
  • Grow incrementally - Manage budget to always match your needs
  • Build a layered defense - Deploy best of breed inline security and out-of-band analysis tools to build a tiered defense
  • Feed the right data to the right tools - Analyze data with the optimal tool for each task; use visibility intelligence to direct data to the relevant tools (see Tolly report)
  • Migrate to a virtual data center - Maintain security across your physical and virtual infrastructure from a common security platform
Additional information:
Blog - Data Masking with Ixia´s ATI Processor
Artikel (german) - LANline - Hochverfügbare und performantere Security-Infrastruktur
Video - Ixia Network Visibility Takes on the Hacker
Video - Ixia Vision ONE


SYS-V-ONE-24x1G-AC
 
48x 10G HW Ports incl., 4x 40G HW Ports incl., 24x Ports Licensed for 1G Use, AC-Version

SYS-V-ONE-24x1G-DC
 
48x 10G HW Ports incl., 4x 40G HW Ports incl., 24x Ports Licensed for 1G Use, DC-Version

Physical Specifications
- 1RU high 19" rack-mountable chassis
- Dimensions: 17.5W x 29.5L x 1.75H (inches) / 44.5W x 75.0L x 4.5H (cm)
- Weight: 36.4lb / 16.5kg

Operational Environment

Temperature:
Operating: 5°C to 40°C
Short-term*: -5°C to 55°C (*not to exceed 96 consecutive hours)
Short-term* with fan failure: -5°C to 40°C (*not to exceed 96 consecutive hours)

Humidity:
Operating: 5% to 85%, (non-condensing)
Short-term*: 5% to 90% (non-condensing, *not to exceed 96 hours)

Compliance
RoHS, IEC-60950-1:2005, UL60950-1, and CSA C22.2 No. 60950-1, EN 60950-1, CE, FCC, AS/NZS CISPR 22 & 24, 55022, 55024, IEC-003

- Powerful GUI allows you to focus on security rather than configuration - the industry-leading user interface and patented filter compiler make configuration simple for both inline and out-of-band topologies

- SSL decryption provides downstream security tools with plain text content so they do not need to support or incur the performance overhead of decrypting traffic to find hidden threats

- Zero-loss advanced packet processing improves security tool efficiency through techniques such as deduplication and packet trimming

- Deep packet inspection classifies traffic in real time and directs it to the correct tool according to parameters such as application type, geolocation, or even handset type - so tools get the just the traffic type they need, again optimizing your investment in tool infrastructure

- Sophisticated load balancing distributes traffic across a number of tools for monitoring or inline in serial or parallel to maximize up-time and ensure that no critical data is lost

- Data Masking for recording network data without recording sensitive data

- Space efficient 1RU design saves rack space in your data center

Director - Foto Prodotto - 1G/10G Net Tool Optimizer - NTO 5236
HOT
1G/10G Net Tool Optimizer - NTO 5236

Clicca per ingrandire - Director - Foto Prodotto - 1G/10G Net Tool Optimizer - NTO 5236
High-Density 1GE and 10GE Visibility and High-Performance Solution for Fiber Networks

Ixia´s Anue Net Tool Optimizer (NTO) 5236 network monitoring switch is ideally suited to provide high-performance 10G visibility for network monitoring tools in all parts of a fiber network. This includes the access, distribution and backbone layers as well as the server farm and data center environments. The Ixia Anue NTO 5236 aggregates, replicates and filters network traffic using the industry´s most advanced, easy to use, drag-and-drop Control Panel.

The Ixia Anue NTO 5236 is available in a 10G version or a 1G fiber optic version. The 1G version can be upgraded in the field to the 10G version at a later date.

The Ixia Anue NTO 5236 includes two module slots on the rear of the unit where up to four 10G ports can be added that are available as expansion modules. Expansion modules are available to support CX4, XFP, and SFP+ interfaces. An optional remote power supply can serve as a redundant power source for high availability configurations.

The Ixia Anue NTO 5236 network monitoring switch uses an intuitive, CLI-Free Control Panel that manages complete configuration of the NTO system. Software updates and licensing are performed quickly and efficiently through the same industry-leading GUI.


SYS-5236-ALL
 
NTO 5236 base system - with all 24 10G and 4 Copper ports enabled

SYS-5236-20GAFM
 
NTO 5236 System with 24 10G and 4 Copper ports enabled - with 20G of AFM

SYS-5236-40GAFM
 
NTO 5236 System with 24 10G and 4 Copper ports enabled - with 40G of AFM

SYS-5236-GIG-ALL
 
NTO 5236 base system - with all 24 1G and 4 Copper ports enabled

SYS-5236-STD
 
Base system with four 1GE SFP and one 10GE SFP+ ports enabled

SYS-5236-ONE
 
Base system with five 1GE SFP ports enabled

SYS-5236-TEN
 
Base system with five 10GE SFP+ ports enabled

SYS-5236-ALL
 
Base system with all ports enabled: 20 1GE/10GE SFP/SFP+ ports, four 10/100/1000 RJ-45 ports and two SFP/SFP+ modules

SYS-5236-AFM
 
Base system with all ports enabled: 20 1GE/10GE SFP/SFP+ ports, four 10/100/1000 RJ-45 ports and four 1GE/10GE SFP/SFP+ AFM ports

SYS-5236-SPARE
 
Cold spare system with no ports enabled

SYS-5236-GIG
 
1GE base system with five 1GE SFP ports enabled

SYS-5236-GIG-SPARE
 
Cold spare system with no ports enabled

LIC-P5200-G1C
 
1GE Copper, RJ-45 Port - 10/100/1000 Base-T, quantity One

LIC-P5200-G4C
 
1GE Copper, RJ-45 Port - 10/100/1000 Base-T, quantity Four

LIC-P5200-G1D
 
1GE SFP Port - quantity One (transceiver not included)

LIC-P5200-G4D
 
1GE SFP Port - quantity Four (transceiver not included)

LIC-P5200-G8D
 
1GE SFP Port - quantity Eight (transceiver not included)

LIC-P5200-G15D
 
1GE SFP Port - quantity Fifteen (transceiver not included)

LIC-P5200-X1D
 
10GE SFP+ Port - quantity One (transceiver not included)

LIC-P5200-X4D
 
10GE SFP+ Port - quantity Four (transceiver not included)

LIC-P5200-X8D
 
10GE SFP+ Port - quantity Eight (transceiver not included)

LIC-P5200-X15D
 
10GE SFP+ Port - quantity Fifteen (transceiver not included)

LIC-P5200-X1D-UP
 
Upgrade 1GE SFP port to 10GE/1GE SFP+ port - quantity One (transceiver not included)

MOD-P5200-X2D-ADV
 
Advanced Feature Module with 10G or 1G Optical SFP/SFP+ Ethernet Ports - quantity two. Ports can be used with SFP or SFP+ transceivers

Performance
  • 10MB to 10GE Ethernet support
  • Non-blocking architecture; 244Gbps total bandwidth
  • Full line rate across all ports with filtering enabled
  • Port reconfiguration with no performance impact
Port Flexibility
  • Up to 28 ports available
  • Ports 1-20: 1GE (SFP) or 10GE (SFP+)
  • Ports 21-24: Up to 1GE copper
  • Modular Ports 1-4: 1GE SFP+, 10GE CX-4, 10GE XFP or 10GE SFP+
  • Ingress/Egress port programmability
  • Software port licensing
  • Timestamping (local and NTP)*
  • Burst Protection*
  • Port tagging
  • Monitoring tool port load balancing

Director - Foto Prodotto - Versastream 1G Copper/SFP Network Packet Broker
Versastream 1G Copper/SFP Network Packet Broker

Clicca per ingrandire - Director - Foto Prodotto - Versastream 1G Copper/SFP Network Packet Broker
The Datacom Systems VERSAstream helps solve many of today's most pressing tool deployment problems by allowing companies to conveniently connect test and monitoring tools to any traffic on the network. Not only does this provide access capabilities to leverage network tools throughout the enterprise, it allows multiple departments with different needs to share tools and network access points with remote and centralized control.

Full Network Visibility for Monitoring Solutions

Aggregation
Monitoring network traffic from two different sources is an important and frequent requirement in network analysis, commonly referred to as data "aggregation". For example, in order to properly troubleshoot most network problems, network professionals need to receive traffic from both sides of a full duplex conversation.

Many network analysis or security tools are capable of monitoring traffic from many different points in the network at once. These tools however, only have a limited number of network interface cards and can only receive traffic from as many sources as they have ports.

Aggregation allows traffic to be combined from multiple sources including tap outputs, SPAN ports, or mirror ports. By combining the traffic originating from different sources into a single link, a single tool can be leveraged to provide security or analysis to a larger part of the network.

Regeneration
One-to-Many configurations replicate copies of identical network traffic to provide multiple tools monitoring access to the same links. In addition to eliminating contention for access to critical links, multiple tools can be connected to the same traffic streams for redundancy, testing, or advanced monitoring applications.

In addition to being able to replicate traffic to multiple tools, regeneration also provides the capability of sharing identical copies of traffic with multiple departments. This can eliminate SPAN port contention and allow each department access to a wider variety of data. With fully customizable regeneration, each department has the ability to access only the traffic flows that they need to see to do their job.

Port Steering (Any-to-Any)
Every port on the VERSAstream™ is capable of sending incoming traffic to any other port, and as a result, is capable of receiving traffic from any other port.

Since the port steering is left unrestricted, it is possible to set up the VERSAstream™ in a way that best compliments the data capturing architecture. These Any-to-Any ports can be dynamically configured through an easy to use command line interface (CLI).

Configurability
Using an easy to use command line interface (CLI), all port settings and management settings can be configured on the fly. As port speeds, network setup, and traffic requirements change the VERSAstream™ can with them.

Features like SNMP can be enabled and configured through the CLI for easier managment of the switch, While traffic related features like VLAN Tag Stripping can be enabled and configured through the CLI to customize it´s traffic flows.

Secure Access to Traffic
VERSAstream™ Data Access Switches are deployed out-of-band, and have no MAC or IP settings on the traffic ports. Because of this, the switch is invisible to the network and does not modify the traffic passing through it.


VS-1204BT-S
 
4-Port Copper Data Access Switch

VS-1208BT-S
 
8-Port Copper Data Access Switch

VS-1208BT/SFP-S
 
8-Port Copper / 2-Port SFP Data Access Switch

VS-1210-SFP-S
 
10-Port SFP Data Access Switch

Accessori
RMC-2 2-TAP 1U Rack Mount Chassis  
RMC-12-2 12-TAP 6U Rack Mount Chassis  
RPS-12-5-AC 12-TAP Dual Redundant Rack Mountable AC Power Supply Unit  
RPS-12-5-DC 12-TAP Dual Redundant Rack Mountable DC Power Supply Unit  

ANY TO ANY PORTS:
- Any-to-Any Ports: Four (4) 10/100/1000 Any-to-Any ports (RJ45)
- Management Port: RJ45
- Console Port: DB9

POWER REQUIREMENTS:
- Two (2) External AC Adapters (Included)
- Input: 100-240VAC, 50-60Hz, 0.8A

CERTIFICATIONS: CE, RoHS

DIMENSIONS (HxWxD): 1.10 x 8.00 x 7.00 in (2.79 x 20.32 x 17.78 cm)

WEIGHT: 1.6 lbs. (0.7 kgs)

ENVIRONMENTAL:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C)
- Humidity: 5 to 90% non-condensing

WARRANTY: One (1) Year Hardware Warranty included, Advanced Replacement-Next Day, 3rd Business Day options available

  • Port Steering Any-to-Any ports allow traffic aggregation and copies to multiple tools
  • Consolidate monitoring tools to reduce management expenses and lower tool costs
  • Single point of deployment and remote management minimizes management expenses and reduces MTTR
  • Deploy tools right away without impacting your production network
  • Keep all your tools plugged in while troubleshooting
  • Easily share scarce SPAN ports and test access points without maintenance windows or approval
  • Provide immediate networkaccess for new compliance monitors
VS-1204BT-S
Data Sheet PDF-File Data Sheet
VS-1204BT-S
Application Guide JPG - File Deployment
VS-1204BT-S
Installation Guide PDF-File Install Guide
VS-1208BT-S
Data Sheet PDF-File Data Sheet
VS-1208BT-S
Application Guide JPG - File Deployment
VS-1208BT-S
Installation Guide PDF-File Install Guide
VS-1210-SFP-S
Data Sheet PDF-File Data Sheet
VS-1210-SFP-S
Application Guide JPG - File Deployment
VS-1210-SFP-S
Installation Guide PDF-File Install Guide
VS-1210BT/SFP-S
Data Sheet PDF-File Data Sheet
VS-1210BT/SFP-S
Application Guide JPG - File Deployment
VS-1210BT/SFP-S
Installation Guide PDF-File Install Guide

Director - Foto Prodotto - Versastream 1G Copper/SFP Network Packet Broker /w Filtering & LB
Versastream 1G Copper/SFP Network Packet Broker /w Filtering & LB

Clicca per ingrandire - Director - Foto Prodotto - Versastream 1G Copper/SFP Network Packet Broker /w Filtering & LB
Flexible, Any-to-Any Line-Rate Hardware Based Load Balancing and Packet Filtering for Cost Effective Data Capture and Monitoring Applications. 12-24 Ports Any-to-Any Switch with Load Balancing. Flexible, Any-to-Any Line-Rate Hardware Based Load Balancing and Packet Filtering for Cost Effective Data Capture and Monitoring Applications

Data Capture Infrastructure Optimizes Network Monitoring and Increases Efficiency
Networks are growing more complex, carrying more services, higher volumes of multi-protocol network traffic, and requiring greater bandwidth. At the same time, network and security personnel are required to monitor and analyze more links in greater detail throughout the network in order to meet application performance demands, minimize security threats, and meet regulatory compliance. Datacom Systems helps solve many of today's most pressing tool deployment problems by allowing organizations to conveniently connect 1G test and monitoring tools to any traffic on the network.

Load Balancing
Balance traffic across multiple ports to allow growth as the volume of data increases. Load balancing helps prevent loss of data by enabling deployment of redundant security tools that can back each other up, in the event of failure while their software updates. As link utilization increases, you need to be able to distribute traffic across more analysis tools. Load balancing allows you to extend the life of existing devices as your network traffic increases.

Data Filtering
Instead of tools attempting to keep up with aggregate traffic streams, the VERSAstream can apply packet filters to the data to increase tool efficiency and eliminate port oversubscription. Line-rate hardware filtering on each port allows you to customize and streamline the amount and type of data each connected monitoring tool receives. Because they are receiving only traffic of interest, tools run faster, data is more manageable, and issues are resolved quicker. Command line filtering uses Wireshark based syntax.

Aggregation (Many-to-Any)
Many-to-Any monitoring access aggregates network traffic and provides visibility for one or more monitoring tools. Aggregate and reassemble full duplex conversations from one or more trunked links. Perfect for tools that don't support multiple monitoring interfaces or for redundant networks, EtherChannel, load balanced servers, and asymmetrically routed traffic.

Regeneration (Any-to-Many)
Any-to-Many configurations replicate copies of identical network traffic to provide multiple tools with monitoring access to the same links. In addition to eliminating contention for scarce SPAN ports and test access points, multiple tools can be connected to the same link for redundancy, testing, or advanced monitoring applications.

Port Steering (Any-to-Any)
Any of the ports can be configured as input (network) or output (monitoring) ports on the fly through an easy to use command line interface (CLI) or Web-based management.


VS-1012-F
 
12 Port Any-to-Any Switch with Filtering & Load Balancing

VS-1024-F
 
24 Port Any-to-Any Switch with Filtering & Load Balancing

Accessori
VS-1012-F-1 VERSAstream™ 12 Port Data Access Switch SFPs Single Power Supply  
VS-1012-F VERSAstream™ 12 Port Data Access Switch SFPs Dual Power Supply  
SFP-RJ45 10/100/1000BT Copper Transceiver  
SFP-LX 1G Singlemode Fiber Transceiver (9µ)  
SFP-SX 1G Multimode Fiber Transceiver (50 or 62.5µ)  

ANY TO ANY PORTS
- Any-to-Any Ports: Twelve (12) (Supports SFP SX, LX, BT)
- Management Port: RJ45
- Console Port: DB9

POWER REQUIREMENTS
- Single or Dual Redundant Hot Swappable Power Supplies (Included)
- Maximum Power Consumption: Less than 200 Watts
- Individual Power Supply Rating: 100-240V ~47-63Hz 4A MAX.

CERTIFICATIONS: CE, RoHS

DIMENSIONS (HxWxD): 1.72 x 19.00 x 21.00 in (4.37 x 48.26 x 53.34 cm)

WEIGHT: 18.15 lbs (8.23 kgs)

ENVIRONMENTAL
- Operating Temperature: 32° to 131°F (0° to 55°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C)
- Humidity: 5 to 95% non-condensing

FILTERING
- IPv4 Address Sources and Destinations, Subnets
- MAC Address Sources and Destinations
- Ports
- Ethertype
- VLAN
- IPv6 Address Sources and Destinations, Subnets

WARRANTY: One (1) Year Hardware Warranty included, Advanced Replacement-Next Day, 3rd Business Day options available



  • Load Balancing - Balance sessions across multiple outputs for monitoring redundancy
  • 240 Gbps backplane
  • All ports active with full features no per port licensing. Input from passive TAPs or SPANs.
  • Filtering - Line-rate hardware-based filtering can eliminate port oversubscription.
  • Filter on IPv4 Src/Dst Address, MAC Address, Protocol, Port, Ethertypes i.e. MPLS, VLAN, IPv6 Src/Dst Address
  • Aggregation/Regeneration - Combine multiple network links or channels into one stream or send copies to multiple connected tools to share data sources
  • Media Conversion - Leverage existing monitoring tools regardless of media type
  • Manage device remotely or locally with Web-based management (HTTPs) or extensive CLI (telnet/SSH)
  • SNMP v2c, v3c
  • RADIUS, TACACS+
VS-1012-F
Data Sheet PDF-File Data Sheet
VS-1012-F
Application Guide PDF - File Deployment
VS-1024-F
Data Sheet PDF-File Data Sheet
VS-1024-F
Application Guide PDF - File Deployment

Director - Foto Prodotto - xStream 40 - 1G/10G Network Packet Brokering Switch
xStream 40 - 1G/10G Network Packet Brokering Switch

Clicca per ingrandire - Director - Foto Prodotto - xStream 40 - 1G/10G Network Packet Brokering Switch
Ixia's xStream 40 product family provides comprehensive Network Packet Brokering for 40G networks, delivering filtering, aggregation, load-balancing, time stamping and more.

Aggregation, Filtering, and Load Balancing for 10GbE/40GbE Networks

The need to monitor and inspect all traffic on high-volume 10GbE and 40GbE networks pressures organizations to invest heavily in new 10/40GbE tools, or risk oversubscribing their current tools. The Ixia xStream™ 40 is a network packet broker (NPB) for high-speed networks, purpose-built for fail-safe inline security tool deployments and out-of-band network traffic monitoring.

The xStream 40 offers a comprehensive set of high availability (HA) features that are critical for fail-safe inline security tools deployment. Smart load-balancing enables deployment of multiple tools in parallel to increase the overall throughput, thus removing bottlenecks typically seen on a single security device. It also supports tools such as SSL decryptors, intrusion prevention systems (IPSs), firewalls, and web accelerators in serial for service-chaining. This enables banks, retailers, and government and health organizations to support many different enterprise network deployment scenarios.

The xStream 40 also features Ixia´s unique "Double Your Ports" feature (simplex connections), which provides industry-leading port density in a compact form factor. Moreover, each of the four 40GbE ports can be configured as four independent 10GbE ports, allowing a maximum of 64 10GbE ports. Furthermore, you can even combine four independent 10GbE ports into a single 40GbE, using the same MTP to LC fan-out cable, effectively yielding a maximum of 16 40GbE ports in the chassis.

Aggregation and Filtering
xStream 40 provides one-to-one, many-to-one, one-to-many, and many-to-many mappings of network links to monitor ports. Traffic from any set of network links and SPAN ports can be aggregated into a single stream and copied to any monitor port. xStream 40 is also a smart filtering appliance that directs traffic of interest to monitoring tools. Using the TapFlow™ filtering technology, each tool gets only the traffic it needs for its particular purpose, resulting in higher scalability and better security. The TapFlow hardware filtering engine processes traffic at full 40/10Gbps line speeds while filtering the traffic by protocol, IP address, TCP/UDP port, VLAN, and more.

Load Balancing Solution
The xStream 40 is a purpose-built appliance for distributing a traffic load to multiple tools. SFP+/QSFP+ ports and an integrated multi-speed flow distribution engine make xStream 40 ideal for distributing and load-balancing traffic from 10GbE and 40GbE links to multiple 1GbE and 10GbE tools.

It can also aggregate traffic from multiple 1GbE and 10GbE links and distribute it to 1GbE, 10GbE, or 40GbE tools. With the addition of a monitoring load balancer, these multiple 1GbE, 10GbE, or 40GbE tools can share the load to process increasing volumes of traffic more cost-effectively than investing in new 40GbE or 10GbE tools. Not only is the CAPEX lower, but major savings also accrue through avoiding the disruption and learning curve of integrating complex new tools into the environment.

High Availability
Highly reliable and foolproof HA feature supports Active-Active and Active-Standby modes with both Auto Sync and Manual Sync options to maintain configuration and state synchronization between the primary and secondary xStream 40 units. The HA link between the primary and secondary units can also be protected with a second link connected using a pair of spare ports. Load Balancing Group (LBG) supports spare ports with N:M tool redundancy where N active ports are protected by M warm standby tools. When tools are deployed in inline serial (service chaining), tools in the front can be safely bypassed when they fail so tools in rear can continue inspecting the traffic. Coupled with HA features in Ixia´s iBypass series, complex use cases can be implemented with extreme high availability.

Timestamping
xStream 40 supports timestamping of packets on the fly at line rate with nanosecond accuracy, supporting high-speed, low-latency trading environments. Using the PTPv2 (IEEE 1588) protocol, xStream 40 guarantees that the timestamping will remain accurate. The timestamp can be appended to packets on the fly with or without recalculation of the CRC.


XT-40
 
48 SFP+, 4 QSFP+ (or 16 more 1/10G ports), AC, Aggregation

XT-40-DC
 
48 SFP+, 4 QSFP+ (or 16 more 1/10G ports), DC, Aggregation

XT-40-DIR
 
48 SFP+, 4 QSFP+(or 16 more 1/10G ports), AC, Aggregation, Filtering

XT-40-DIR-DC
 
48 SFP+, 4 QSFP+(or 16 more 1/10G ports), DC, Aggregation, Filtering

XT-40-LB
 
48 SFP+, 4 QSFP+(or 16 more 1/10G ports), AC, Aggregation, Filtering, Load Balancing

XT-40-LB-DC
 
48 SFP+, 4 QSFP+(or 16 more 1/10G ports), DC, Aggregation, Filtering, Load Balancing

Accessori
Network Analysis
savvius Omnipeek Enterprise Network Analysis  
QSFP+KT-50SR4 40G, 50µm, QSFP+ Transceiver, SR  
QSFP+KT-LR 40G, QSFP+ Transceiver, LR  
10 Gigabit SR Base SFP+ Transceiver w/cable 62,5 850nm 10 Gigabit SR Base SFP+ Transceiver w/cable 50µm 850nm 10 Gigabit LR Base SFP+ Transceiver w/cable 8,5µm, 1310nm 10 Gigabit ER Base SFP+ Transceiver w/cable 8.5µm, 1550nm
SFP+KT-SR 10 Gigabit SR Base SFP+ Transceiver w/cable 62,5 850nm  
SFP+KT-50SR 10 Gigabit SR Base SFP+ Transceiver w/cable 50µm 850nm  
SFP+KT-LR 10 Gigabit LR Base SFP+ Transceiver w/cable 8,5µm, 1310nm  
SFP+KT-ER 10 Gigabit ER Base SFP+ Transceiver w/cable 8.5µm, 1550nm  
1 Gigabit SX Base SFP Transceiver w/cable 62,5µm 850nm 1 Gigabit SX Base SFP Transceiver w/cable 50µm 850nm 1 Gigabit LX Base SFP Transceiver w/cable 8,5µm, 1310nm 1 Gigabit ZX Base SFP Transceiver w/cable 8,5µm, 1550nm 1 Gigabit Copper SFP Transceiver
SFPKT-SX 1 Gigabit SX Base SFP Transceiver w/cable 62,5µm 850nm  
SFPKT-50SX 1 Gigabit SX Base SFP Transceiver w/cable 50µm 850nm  
SFPKT-LX 1 Gigabit LX Base SFP Transceiver w/cable 8,5µm, 1310nm  
SFPKT-ZX 1 Gigabit ZX Base SFP Transceiver w/cable 8,5µm, 1550nm  
SFPKT-GCU 1 Gigabit Copper SFP Transceiver  
10/100/1000Base-T SFP Transceiver w/cable
SFPKT-CU3 10/100/1000Base-T SFP Transceiver w/cable  

PERFORMANCE

Hardware Throughput
1.28 Tbps; no packets dropped as long as monitor traffic does not exceed monitor port bandwidth
Architecture: Cut-Through

Latency
Ultra low latency of 350 nanoseconds, any packet size, any-port to any-port, any amount of regeneration and filtering (excluding aggregation head-of-line blocking delays)

Load Balancing
Flow coherent, hash-based, 5-tuple (SIP, DIP, SPORT, DPORT, protocol), 2-tuple (SIP+DIP), or other combinations of L2-L4 header fields including SMAC, DMAC, ethertype, and VLAN; out-of-band, inline, tool sharing; 40G-to-10G and 10G-to-1G data rate conversion; link-state awareness; Heartbeat monitoring of inline tool health; 1 to 8 independent load balance groups with up to 16 load-balanced outputs per group; load balancing multicast

Timestamping
Timestamping with nano second accuracy and support for PTPv2 (IEEE 1588)

Port Mapping
Aggregation, any number of ports; regeneration, any number of ports; any-to-any, any-to-many, many-to-any, and many-to-many; any port can be used as an input, an output, or both simultaneously

TapFlow
Filter by IP source address, IP destination address, MAC source address, MAC destination address, source port, destination port, protocol, network port or port group, VLAN

IP Options
MPLS Label, GTP Tunnel ID, DSCP, TOS, User Defined

Network Intelligence
Current utilization, total packets, total bytes, CRC errors. More than 100 detailed traffic statistics and counters including RMON, All counters can be exported as CSV files

Packet Slicing
Truncate size is configurable by the user

TACACS+/RADIUS
Server allows authentication of users from external AAA servers using either RADIUS or TACACS+ protocols

Device Management
Web UI, Serial console, SSH, SNMPv3, SNMPv2, SNMPv1, Remote software upgrades, back up and restore configuration, Role-Based Access Control Management, Netconf


CHASSIS

Environment
Operating Temperature: 0°C to 40°C
Storage Temperature: -10°C to 70°C
Relative Humidity: 10% min, 95% max, non-condensing

Mechanical
Dimensions: 1.72" high x 15.5" deep x 17.4" wide
Mounting: Surface or 19" rack mount (1U)
Weight: 15.0 lbs

Connectors
Ports: (48) SFP+, (4) QSFP ports or (64) SFP+ with a splitter cable
Management Port: (1) RJ45 10/100/1000 Copper
Configuration (CLI) Port: (1) Cisco DB9 to RJ45
DC Receptacle: Terminal peak, 12-14 gauge wire

Hot-Swappable Modules
Power: (2) AC universal or (2) -48VDC, redundant
Fans: (5) hot-swappable modules (u+1 configuration)

Electrical Interface
AC Input: 100-240VAC, 5.29-2.2A, 50/60Hz
DC Input: -40VDC nominal -40 to -72VDC, 13.9A

Indicators
(All ports) Link LEDs
(All ports) Activity LEDs
(2) Power LEDs

Certifications
Safety: MET, CE
EMC: FCC, VCCI, C-Tick, KC, ME06, CCC, AR
Environmental: RoHS, WEEE
Protocol: Fully IEEE 802.3 compliant

Basic NPB
  • Purpose-built tool for load balancing
  • Flow-coherent traffic distribution for multiple inline tools or monitoring tools working in parallel
  • Supports tool sharing multiple independent links can share a pool of monitoring devices
  • TapFlow - multi-layer filtering engine for layer 2-4 filtering
  • Aggregation of input traffic from multiple links
  • Packet slicing
  • Any-to-any, many-to-many port mapping
  • RMON statistics (packet count, utilization, etc.), All counters can be exported as CSV files
  • Works with external taps, SPAN ports, and bypass switches
  • Up to 64 1-Gigabit SFP+, 10-Gigabit, and up to 4 QSFP 40G ports
  • Dual redundant hot-swappable AC or DC power supplies
  • Inline tool load balancing (IPS): Leverages 1G, 10G, and 40G? monitoring tool investments
  • Improves 10G network compliance and security management
  • Relieves oversubscribed tools through load balancing and packet slicing
Advanced NPB
  • Link-State awareness
  • Heartbeat monitoring of attached tools
  • VLAN tag management
  • Any port can be used for monitor or network
  • MPLS label filtering
  • Port rate limiting
  • High Availability (HA)
  • Timestamping with nanosecond accuracy
  • MPLS Stripping
  • Any Packet stripping
Ease of Use
  • Netconf for SDN Integration
  • Intuitive Web UI, SSH access
  • Secure Web based management
  • Advanced SNMPv3 integrates with all major NMS and Indigo Pro
  • TACACS+/RADIUS support
  • Role-Based Access Control Management
  • Graphical Drag & Draw Filters

Director - Foto Prodotto - xStream 10 - 24x 1G/10G SFP+
xStream 10 - 24x 1G/10G SFP+

Clicca per ingrandire - Director - Foto Prodotto - xStream 10 - 24x 1G/10G SFP+
Aggregate all traffic from multiple 10 gigabit links for flexible monitoring coverage.

The need to monitor expanding volumes of 10 Gbps traffic is straining CAPEX budgets due to the high cost of 10G monitoring tools. The iLink Agg xStream helps you leverage your monitoring tool investments by:

* Enabling existing 1G tools to be applied to 10G traffic
* Providing the ability to take advantage of the full bandwidth of 10G tools
* Supplying more port density than any other 1U form factor link aggregator

The iLink Agg xStream is a link aggregator that combines traffic from as many as 20 network links or Span ports and sends it to four monitoring tools. Each of its 24 SFP+ ports accepts both 10G SFP+ and 1G-SFP transceivers, enabling 10G and 1G links, Span ports, and monitoring appliances to interconnect in any mix of speeds, including different fiber and copper media types. The iLink Agg xStream automatically performs all data-rate and media-type conversions, enabling 10G traffic to be sent to 1G appliances, and 1G traffic to 10G tools. This capability protects your security appliance investment, because the iLink Agg Xstream enables you to apply your existing arsenal of 1G monitoring tools to your new 10G traffic links. You can aggregate the traffic from multiple 1G links and low-utilization 10G links to fill up the bandwidth of expensive 10G tools.

Read more ...


XT-10-BASE-AC
 
xStream 10, Base System, AC Version

XT-10-BASE-DC
 
xStream 10,Base System, DC Version

XT-10-AGG (former LA-2400X resp. XF-2ILX)
 
xStream 10 Aggregation

XT-10-DIR (former DIR-2400X resp. XF-2DIR)
 
xStream 10 Filtering

XT-10-LB (former DIR-2400X resp. XF-2LB)
 
xStream 10 Load Balancing

XT-10-UAD
 
xStream 10, upgrade Aggregation to Filtering

XT-10-UAL
 
xStream 10, upgrade Aggregation to Load Balancing

XT-10-UDL
 
xStream 10, upgrade Filtering to Load Balancing

Accessori
Network Analysis
savvius Omnipeek Enterprise Network Analysis  
Direct-Attach SFP+ Twinax Cable, 5 meter
490-0655-001 Direct-Attach SFP+ Twinax Cable, 5 meter  
10 Gigabit SR Base SFP+ Transceiver w/cable 62,5 850nm 10 Gigabit SR Base SFP+ Transceiver w/cable 50µm 850nm 10 Gigabit LR Base SFP+ Transceiver w/cable 8,5µm, 1310nm 10 Gigabit ER Base SFP+ Transceiver w/cable 8.5µm, 1550nm
SFP+KT-SR 10 Gigabit SR Base SFP+ Transceiver w/cable 62,5 850nm  
SFP+KT-50SR 10 Gigabit SR Base SFP+ Transceiver w/cable 50µm 850nm  
SFP+KT-LR 10 Gigabit LR Base SFP+ Transceiver w/cable 8,5µm, 1310nm  
SFP+KT-ER 10 Gigabit ER Base SFP+ Transceiver w/cable 8.5µm, 1550nm  
1 Gigabit SX Base SFP Transceiver w/cable 62,5µm 850nm 1 Gigabit SX Base SFP Transceiver w/cable 50µm 850nm 1 Gigabit LX Base SFP Transceiver w/cable 8,5µm, 1310nm 1 Gigabit ZX Base SFP Transceiver w/cable 8,5µm, 1550nm 1 Gigabit Copper SFP Transceiver
SFPKT-SX 1 Gigabit SX Base SFP Transceiver w/cable 62,5µm 850nm  
SFPKT-50SX 1 Gigabit SX Base SFP Transceiver w/cable 50µm 850nm  
SFPKT-LX 1 Gigabit LX Base SFP Transceiver w/cable 8,5µm, 1310nm  
SFPKT-ZX 1 Gigabit ZX Base SFP Transceiver w/cable 8,5µm, 1550nm  
SFPKT-GCU 1 Gigabit Copper SFP Transceiver  
10/100/1000Base-T SFP Transceiver w/cable
SFPKT-CU3 10/100/1000Base-T SFP Transceiver w/cable  
1 DC Power Supply Module
XF-2PWRDC 1 DC Power Supply Module  
1 AC Power Supply Module
XF-2PWRAC 1 AC Power Supply Module  
1 Replacement Fan Module
XF-2FAN 1 Replacement Fan Module  

Performance

Hardware throughput:
480 Gbps; no packets dropped as long as monitor traffic does not exceed monitor port bandwidth

Latency:
650 nanoseconds (excluding aggregation head-of-line blocking delays)

Port Mapping:
Aggregation, any number of ports in; regeneration, any number of ports out; any-to-any, any-to-many, many-to-any, and many-to-many; any port can be used as an input, an output, or both simultaneously - monitor ports can be used as additional network ports, and network ports can be used as additional monitor ports

RMON Statistics:
Current utilization, total packets, total bytes, CRC errors and many more

TACACS+/RADIUS:
Server allows authentication of users from external AAA servers using either RADIUS or TACACS+ protocols

Device Management:
Web UI, Serial console, SSH, SNMPv3, SNMPv2, SNMPv1, Remote software upgrades


Chassis

Environment:
Operating Temperature: 0°C to 40°C
Storage Temperature: -10°C to 70°C
Relative Humidity: 10% min, 95% max, non-condensing

Mechanical:
Dimensions: 1.75" high x 19.7" deep x 19.0" wide
Mounting: Surface or 19" rack mount (1U)
Weight: 13.5 lbs.

Connectors:
Fiber Optic Interfaces: (24) SFP/SFP+
Management Port: (1) RJ45 10/100/1000 Copper
Configuration (CLI) Port: (1) Cisco DB9 to RJ45
DC Receptacle: Terminal peak, 12-14 gauge wire

Hot-swappable modules:
Power: (2) AC universal or (2) -48VDC, redundant
Fans: (4) hot-swappable modules

Electrical interface:
AC Input: 100-240VAC, 5.29-2.2A, 50/60Hz
DC Input: -40VDC nominal -40 to -72VDC, 13.9A

Indicators:
(All ports) Link LEDs
(All ports) Activity LEDs
(2) Power LEDs

Certifications:
Safety: MET, CE
EMC: FCC, VCCI, C-Tick, KC, ME06, CCC, and AR
Environmental: RoHS, WEEE
Protocol: Fully IEEE 802.3 compliant

Additional Part Numbers:
SFP+ or SFP modules are required for operation and are sold separately.

SFP+ kits - 10 Gbps:
SFP+KT-SR, 10G Fiber SR SFP+ Transceiver
SFP+KT-50SR, 10G Fiber SR 50µm SFP+ Transceiver
SFP+KT-LR, 10G Fiber LR SFP+ Transceiver

SFP kits - 1 Gbps:
SFPKT-SX, 1G Fiber SX SFP Transceiver
SFPKT-50SX, 1G Fiber SX 50µm SFP Transceiver
SFPKT-LX, 1G Fiber LX SFP Transceiver
SFPKT-GCU, 1G Copper SFP Transceiver
SFPKT-CU3*, 10/100/1000 Copper SFP Transceiver

All SFP+ and SFP kits include a 3-meter cable.

* The SFPKT-CU3 transceiver may be used in this device but requires that the remote device be set to auto-negotiation off/disable - and speed set to 1Gig (1000 Mbps) with full duplex.

Warranty:
All products include a 1-year manufacturer's warranty. Service plans offering additional years of coverage including an advanced replacement option are available; please visit our support page.

Passive, Secure Technology
  • High Availability (HA)
  • Graphical Drag & Draw Filters
  • MPLS label filtering
  • Port rate limiting
  • Increases monitoring efficiency by enabling tools to view the traffic on as many as 20 network links (from external Taps or Port Aggregators) or 20 Span ports simultaneously
  • Improves monitoring flexibility with fully configurable port mappings (any number of links to any number of tools)
  • Provides complete visibility at 10 Gbps without interfering with the data stream and without introducing a point of failure
  • Supports media type and data rate conversion with SFP+ or SFP transceiver modules on both the network and monitor ports
  • Enhances monitoring security because no IP address is needed
  • Provides RMON statistics such as packet counts, bandwidth utilization, and threshold alarms to increase monitoring efficiency
  • No interference with the data stream and no point of failure introduced
  • Remote traffic statistics and configuration
  • Security options control user access
  • Redundant power ensures uptime
  • Compatible with all Net Optics Taps
  • IEEE 802.3 compliant
  • Fully RoHS compliant
Warranty
  • All Net Optics products come standard with a 1 year manufacturer's warranty
  • Optional 1 or 2 year extended warranty available at time of product purchase
Ease of Use
  • Pre-loaded with common port mapping configurations
  • LEDs indicate Link, Activity, and Power status
  • Front-mounted connectors ease installation and operation
  • Compatible with all major manufacturers´ monitoring devices, including protocol analyzers, probes, firewalls, and intrusion detection and prevention systems

Director - Foto Prodotto - Director (Pro) - 1G/10G NPB and Monitoring Access Switch
Director (Pro) - 1G/10G NPB and Monitoring Access Switch

Clicca per ingrandire - Director - Foto Prodotto - Director (Pro) - 1G/10G NPB and Monitoring Access Switch
Ixia's Director family of smart filtering appliances (Network Packet Brokers) directs traffic of interest to monitoring tools in order to relieve oversubscription, leverage tool investment across groups, and centralize monitoring in the NOC. These advanced network controller and data monitoring switches feature:
  • Tap, aggregation, regeneration, matrix switching, and smart filtering in a single device
  • Deep Packet Inspection (DPI), static and dynamic load balancing, and snapshot packet capture
  • Fast ProPush™ statistics for microburst detection
  • Low-latency, hardware-based TapFlow™ filtering engine
  • 10 Mbps to 10 Gbps operation
  • Inline and SPAN network modules
  • Dual, hot-swappable power supplies

Compact Network Packet Broker with Integrated Failsafe Taps for 1G and 10G Network Monitoring with Scale

The Ixia Director™ and Director Pro™ are compact versions of Network Packet Broker (NPB) with integrated failsafe taps for inline network access and direct traffic of interest to your monitoring tools. The Director Pro differs from Director mainly in two key functions, one in providing dynamic load balancing to tools and the other in supporting complex Deep Packet Inspection (DPI) filters.

Dynamic load balancing distributes the traffic load from 10G and aggregated 1G traffic evenly over multiple tools, while retaining flow integrity. DPI filters provide a powerful capability to look deep inside packets, using pattern matching ASCII or hex - based data within packet payloads. With Director or Director Pro, you can monitor as many as 26 SPAN ports or 13 in - line links with up to 11 monitoring tools depending on configuration. When the tool ports are configured in simplex mode, 10 additional SPAN ports can be connected.

In addition to the configuration flexibility, TapFlow™ filtering technology allows you to perform "smart filtering" and direct traffic of interest based on protocols, IP addresses, ports, VLANs. For Director Pro, additional filter capability includes: utilization threshold, Ethertype, outer MPLS label, and accurate ranges. The filtered traffic can be directed from any network links or span ports to any of the monitoring tools. Up to 10 Director or 2 Director Pro can be daisy - chained to increase the scalability. Director Pro can also be daisy chained with Director; however, it must remain head or tail position of a chain. The Ixia Director and Director Pro provide the access capabilities you need to leverage your monitoring tools across your entire network while streamlining the amount of data the tools need to process. It's a versatile component of a monitoring access platform (MAP) for improved network visibility and security threat management across the entire network.


DIR-3400
 
Director, Main Chassis, 2 Network Bays, 10 SFP Ports

DIR-5400
 
Director, Main Chassis, 2 Network Bays, 10 SFP Ports, 2 XFP Ports

DIR-7400
 
Director, Main Chassis, 2 Network Bays, 10 SFP Ports, 4 XFP Ports

DIR-3400-DC
 
Like DIR-3400 with -48V

DIR-5400-DC
 
Like DIR-5400 with -48V

DIR-7400-DC
 
Like DIR-7400 with -48V

DIR-6400P
 
Director Pro Main Chassis with 10 SFP monitor ports 1G Version and 3 XFP-Ports 10GbE w/filtering, Load Balancing and Deep Packet Inspection, 2 DNM Bays

DIR-3400P
 
Director Pro Main Chassis with 10 SFP monitor ports 1G Version w/filtering, Load Balancing and Deep Packet Inspection (DPI), 2 DNM Bays

DIR-6400P-DC
 
Like 6400P with -48V

DIR-3400P-DC
 
Like 3400P with -48V

Accessori
Director Network Module, Inline, 10/100/1000Base-T, 12 Ports, w/ Virtual Zero Delay
DNM-101 Director Network Module, Inline, 10/100/1000Base-T, 12 Ports, w/ Virtual Zero Delay  
Director Network Module, Inline, 1 Gigabit ZX Singlemode, 8,5µm Director Network Module, SPAN, 1 Gigabit ZX Singlemode, 8,5µm
DNM-320 Director Network Module, Inline, 1 Gigabit ZX Singlemode, 8,5µm  
DNM-330 Director Network Module, SPAN, 1 Gigabit ZX Singlemode, 8,5µm  
Director Network Module, Inline, 1 Gigabit LX Singlemode, 8,5µm, 50:50 Director Network Module, Inline, 1 Gigabit LX Singlemode, 8,5µm, 70:30 Director Network Module, SPAN, 1 Gigabit LX Singlemode, 8,5µm
DNM-300 Director Network Module, Inline, 1 Gigabit LX Singlemode, 8,5µm, 50:50  
DNM-302 Director Network Module, Inline, 1 Gigabit LX Singlemode, 8,5µm, 70:30  
DNM-310 Director Network Module, SPAN, 1 Gigabit LX Singlemode, 8,5µm  
Director Network Module, Inline, 1 Gigabit SX Multimode, 62,5µm, 50:50 Director Network Module, Inline, 1 Gigabit SX Multimode, 62,5µm, 70:30 Director Network Module, SPAN, 1 Gigabit SX Multimode, 62,5µm Director Network Module, Inline, 1 Gigabit SX Multimode, 50µm, 50:50 Director Network Module, In-Line, 1 Gigabit SX Multimode, 50µm, 70:30 Director Network Module, SPAN, 1 Gigabit SX Multimode, 50µm
DNM-200 Director Network Module, Inline, 1 Gigabit SX Multimode, 62,5µm, 50:50  
DNM-202 Director Network Module, Inline, 1 Gigabit SX Multimode, 62,5µm, 70:30  
DNM-210 Director Network Module, SPAN, 1 Gigabit SX Multimode, 62,5µm  
DNM-220 Director Network Module, Inline, 1 Gigabit SX Multimode, 50µm, 50:50  
DNM-222 Director Network Module, In-Line, 1 Gigabit SX Multimode, 50µm, 70:30  
DNM-230 Director Network Module, SPAN, 1 Gigabit SX Multimode, 50µm  
Director Network Module, Inline, 10/100/1000Base-T, 12 Ports    Director Network Module, SPAN, 10/100/1000Base-T, 12 Ports
DNM-100 Director Network Module, Inline, 10/100/1000Base-T, 12 Ports  
DNM-110 Director Network Module, SPAN, 10/100/1000Base-T, 12 Ports  
1 Gigabit SX Base SFP Transceiver w/cable 62,5µm 850nm 1 Gigabit SX Base SFP Transceiver w/cable 50µm 850nm 1 Gigabit LX Base SFP Transceiver w/cable 8,5µm, 1310nm 1 Gigabit ZX Base SFP Transceiver w/cable 8,5µm, 1550nm 1 Gigabit Copper SFP Transceiver
SFPKT-SX 1 Gigabit SX Base SFP Transceiver w/cable 62,5µm 850nm  
SFPKT-50SX 1 Gigabit SX Base SFP Transceiver w/cable 50µm 850nm  
SFPKT-LX 1 Gigabit LX Base SFP Transceiver w/cable 8,5µm, 1310nm  
SFPKT-ZX 1 Gigabit ZX Base SFP Transceiver w/cable 8,5µm, 1550nm  
SFPKT-GCU 1 Gigabit Copper SFP Transceiver  
10/100/1000Base-T SFP Transceiver w/cable
SFPKT-CU3 10/100/1000Base-T SFP Transceiver w/cable  
1 DC Power Supply
DIR-PWRDC 1 DC Power Supply  
1 AC Power Supply
DIR-PWRAC 1 AC Power Supply  

Specifications - Director Chassis


Performance
Hardware throughput: 74Gbps, 54Gbps and 34Gbps
TapFlow: Up to 2,000 filter elements per chassis; filter by IP source address and destination address, MAC source address and destination address, source and destination port, protocol, network port or port group, VLAN, utilization threshold

RMON statistics: Current utilization, peak utilization, peak time, total packets, total bytes, CRC errors, collision, oversize and undersize packets

Alarms: Programmable utilization threshold alarm for each network and monitor port

Indigo™ Management Software
- Ixia Web Manager - compatible with all major web browsers
- SNMP v3, Syslog
- Ixia System Manager - compatible with Windows XP, RADIUS and TACACS+ Authentication

Operating
Operating Temperature: 0 °C to 40 °C
Storage Temperature: -20 °C to 70 °C
Relative Humidity: 10% min,95% max, non-condensing

Mechanical
Dimensions: 1.75" high x 24" deep x 19" wide
Mounting: Surface or 19" rack mount (1U)
Unit Weight: 14.5lbs
DNM: 1.5lbs

Connectors
Network Port Slots: (2) Director Network Module (DNM)
Monitor Ports: (10) SFP
Configurable 10Gbps Ports: (2) XFP
Stacking 10Gbps Ports: (2) XFP
Management Port: (1) RJ45 10/100 Copper Network Configuration (CLI) Port: (1)Cisco DB9 to RJ45
Power: (2) AC universal

Electrical
Power: 100-240VAC, up to 2A, 50-60Hz (Japan: 100-125VAC, ~120VA, 50-60Hz) DC Input: -48VDC nominal. -36 to -72VDC, up to 6.0A
DC Receptacle: Terminal peak, 12-14 gauge wire
Power consumption: Typical 120W, Maximum 200W

Indicators
- (All ports) Link LEDs (with speed indication on Copper ports),
- (All ports) Activity LEDs
- (1) Alarm LED
- (2) Power LEDs

Certifications
- CE, VCCI, and C-Tick certified
- Safety: UL 60950, cUL 60950, CE, CB,
- Emissions and Immunity: FCC, EN, ICES-003 Class A
- Environmental: RoHS, WEEE, Fully IEEE 802.3 compliant


Specifications - Director Pro Chassis


Performance
Hardware throughput: 64Gbps and 34Gbps
Dynamic load balancing: 10Gbps aggregated throughput, 1 to 32 outputs, overflow mode, failover spare, four balance modes: flow (IP address pair), flow (IP source address), flow (IP destination address), packet-by-packet round-robin

TapFlow Filtering: More than 2,000 filter elements per chassis; filter by IP source address , IP destination address, MAC source address, MAC destination address, source port, destination port, protocol, network port, or port group, VLAN, utilization threshold, Ethertype, outer MPLS label; accurate ranges

Layer 7 Filtering: Pattern matching in complete packet payload L4-L7; up to three patterns matched sequentially; 64 byte pattern length; ASCII, hex, bitwise padding; optional case sensitivity, anchored or unanchored search, independent offsets for each pattern and filter

RMON statistics: Current utilization, peak utilization, peak time, total packets, total bytes, CRC errors, collision packets, oversize packets, undersize packets
Alarms: Programmable utilization threshold alarm for each network and monitor port

Indigo™ Management Software
- CLI
- Web UI -compatible with all major Web browsers
- SNMP v3, Syslog
- RADIUS and TACACS+ Authentication
- Indigo Pro

Operating
Operating Temperature: 0 °C to 40 °C
Storage Temperature: -10 °C to 70 °C
Relative Humidity: 10% min, 95% max, non-condensing

Mechanical
Dimensions: 1.72" high x 23.4" deep x 19" wide
Mounting: surface or 19" rack mount (1U)
Weight: DIR-6400P 18 lbs (8.2 kg), DIR-3400P 16 lbs (7.3 kg), DNM 1.5lbs (0.68 kg)

Connectors
Network port slots: (2)
Director Network Module (DNM)
Monitor ports: (10) SFP
Configurable 10Gigabit Ports: (2) XFP
Stacking (uplink) 10Gigabit Ports: (1) XFP
Management Port: (1) RJ45 10/100/1000 Copper Network
Console (CLI) Port: (1) Cisco DB9 to RJ45
Power: (2) AC universal

Electrical
Power: 100-240VAC, up to 2A, 47-63Hz (Japan: 100-125VAC, ~120 VA, 50-60Hz)
DC Input: -48VDC nominal. -36 to -72VDC, up to 6.0A
DC Receptacle: terminal peak, 12-14 gauge wire
Maintenance: power supplies are hot-swappable
Power consumption: Typical 120W, Maximum 200W

Indicators
- (All ports) Link LEDs (with speed indication on Copper ports),
- (All ports) Activity LEDs
- (2) Power LEDs

Certifications
- FCC, CE, VCCI, and C-Tick certified
- Fully RoHS and WEEE compliant


Specifications - Director Network Modules (DNM)


Copper Interfaces
- (12) RJ45 network ports 10/100/1000Mbps
- (6) In-line or (12) SPAN depending on model
- 22-24 AWG unshielded twisted pair cable, CAT5e or better recommended


Fiber Optic Interfaces
- (12) Gigabit SX Network Ports, LC type
- (6) In-line or (12) SPAN depending on model
Fiber Type: Corning Multimode 50 or 62.5/125µm, 850 nm
Transceiver: GigaBit SX 850nm, VCSEL, supports 62.5/125µm
Transceiver: GigaBit LX 1310nm or 1550nm, VCSEL, supports 8.5/125µm
Safety: Class 1, eye-safe, laser emitter type; conforms to the applicable requirements per US 21 CFR (J) and EN 60825-1; also UL 1950 applications

  • Aggregation, Regeneration, Matrix Switching, and smart filtering in a single device
  • Up to four 10 Gbps XFP ports and 34 1 Gbps ports
  • Various hardware configuration for maximum flexibility
  • Inline and SPAN network modules
  • Inline modules contain up to 12 integrated failsafe taps
  • Any to any connectivity from inline/SPAN ports to tool ports
  • Virtual Zero Delay technology
  • Daisy-chain up to 10 chassis for Director and 2 for Director Pro
  • Simplex mode for fiber tool ports to free up RX for up to 10 more SPAN ports
  • Low-latency, hardware-based TapFlow™ multi-layer filtering engine
  • Up to 2,000 filter elements per chassis
  • Enterprise management via CLI, Web GUI, SNMP Syslog and Indigo Pro
  • RADIUS and TACACS+
  • RMON statistics
  • Filter tagging
  • ProPush Statistics
  • Leverages monitoring tool investments
  • Improves network visibility and security threat management
  • Relieves oversubscribed tools by filtering
  • Compatible with monitoring tools and intrusion detection and prevention systems from all major manufacturers

Director - Foto Prodotto - 1G/10G Net Tool Optimizer - NTO 2112/2113 Family
1G/10G Net Tool Optimizer - NTO 2112/2113 Family

Clicca per ingrandire - Director - Foto Prodotto - 1G/10G Net Tool Optimizer - NTO 2112/2113 Family
Full-featured monitoring for small-to-medium environments

Ixia’s new NTO 2112/2113 network monitoring switches raise the bar for new smaller- to medium-size deployments that want the same full feature set as larger network monitoring switches. The new Ixia NTO 2112/2113 family of products are built from the ground up to extend core enterprise class network monitoring features to smaller operations, branch offices and distributed deployments. The solution delivers the unique capabilities of the NTO monitoring switch at a cost-effective price. This full-featured platform uses a set of pre-configured monitoring switches that help customers control costs, protect their investments and provide flexibility to solve their business challenges. This product set provides a new level of scalability for small data center deployments.

The challenges associated with lack of visibility have traditionally been considered a large enterprise network problem. However, the vast growth of data that businesses of all sizes are facing means smaller companies now more than ever need visibility into their networks. IT teams use an array of tools to monitor networks and applications. Now, they need to provide enterprise-class visibility remote and distributed physical and virtual networks.

However, obtaining the complete data needed for in-depth, network-wide analysis is a growing challenge due to increasing network speeds, network complexity, and networks’ dynamic natures. Investment protection is always a key concern for IT managers. You want to seamlessly integrate new products into an existing solution by minimizing and/or eliminating new product training costs by using consistent, intuitive, and easily understood solutions.

Product FeatureIxia NTO 2112Ixia NTO 2113
1GE and 10GE LinksXX
Traffic aggregationXX
3 stage dynamic packet filteringXX
Filter template libraryXX
Non-blocking architecture XX
Full line rate across all ports withfiltering enabledXX
Local and/or central management XX
SNMP v1, v2, v3 supportXX
TACACS+ support (members andgroups)XX
Granular access control featuresXX
Syslog and Event loggingXX
IT Automation controlXX
Load balancingXX
Packet de-duplication X
Packet processing– VLANstripping, VLAN tag stripping, GTPstripping, MPLS stripping, packettrimming X
Port tagging and Time stamping X
Extended burst protection X


SYS-2112-STD
 
Anue NTO 2112 System. NTO 2112 Net Tool Optimizer - Provides four 1GE/10GE SFP/SFP+ and eight 1GE SFP and four 1GE RJ45 ports

SYS-2113-STD
 
Anue NTO 2113 System, NTO 2113 Net Tool Optimizer - Provides four 1GE/10GE SFP/SFP+ and eight 1GE SFP, four 1GE RJ45 ports, and two 1GE/10GE SFP/SFP+ advance feature ports

Key Features
  • New 2112/2113 model comes preconfigured with all ports activated which makes deployments quick and easy
  • Cost-effective solution for small and/or remote locations
  • Simplified configuration and ordering makes it easy for customers to buy and dealers to sell
  • The same NTO user interface and feature software, giving a consistent look and feel to customers – regardless of the product
  • NTO-2113 includes packet de-duplication, packet trimming, MPLS stripping, GTP stripping, and extended burst protection
NTO-2112
Data Sheet PDF-File Data Sheet
NTO-2113
Data Sheet PDF-File Data Sheet

Director - Foto Prodotto - Versastream 1G/10G SFP+/SFP NPB /w Filtering & Load Balancing
Versastream 1G/10G SFP+/SFP NPB /w Filtering & Load Balancing

Clicca per ingrandire - Director - Foto Prodotto - Versastream 1G/10G SFP+/SFP NPB /w Filtering & Load Balancing
The VERSAstream™ VS-1212/VS-1224 is a 12/24 Port Any-to-Any network monitoring switch with Load Balancing and Packet Filtering that can combine data from multiple Gigabit and 10 Gigabit Ethernet network segments into one or more streams of data. Use it to balance traffic across multiple ports as the volume of data increases. Instead of tools attempting to keep up with high-speed aggregates traffic streams, the VERSAstream can apply packet filters to the data to increase tool efficiency and eliminate port.

Data Capture Infrastructure Optimizes Network Monitoring and Increases Efficiency
Networks are growing more complex, carrying more services, higher volumes of multi-protocol network traffi c, and requiring greater bandwidth. At the same time, network and security personnel are required to monitor and analyze more links in greater detail throughout the network in order to meet application performance demands, minimize security threats, and meet regulatory compliance. Higher speed networks are being deployed, fueling the need for higher speed monitoring tools. Datacom Systems helps solve many of today's most pressing tool deployment problems by allowing organizations to conveniently connect 10G and 1G test and monitoring tools to any traffic on the network.

Load Balancing
Balance traffic across multiple ports to allow growth as the volume of data increases. Load balancing helps prevent loss of data by enabling deployment of redundant security tools that can back each other up, in the event of failure or during while their software updates. As links get faster, you need to be able to distribute traffic across lower speed analysis tools. Load balancing allows you to extend the life of existing lower speed devices as your network traffic increases.

Data Filtering
Instead of tools attempting to keep up with high-speed aggregates traffic streams, the VERSAstream can apply packet filters to the data to increase tool efficiency and eliminate port oversubscription. Line-rate hardware fi ltering on each port allows you to customize and streamline the amount and type of data each connected monitoring tool receives. Because they are receiving only traffic of interest, tools run faster, data is more manageable, and issues are resolved quicker. Command line filtering uses Wireshark based syntax.

Aggregation (Many-to-Any)
Many-to-Any monitoring access aggregates network traffic and provides visibility for one or more monitoring tools. Aggregate and reassemble full duplex conversations from one or more trunked links. Perfect for tools that don't support multiple monitoring interfaces or for redundant networks, EtherChannel, load balanced servers, and asymmetrically routed traffic.

Regeneration (Any-to-Many)
Any-to-Many confi gurations replicate copies of identical network traffic to provide multiple tools with monitoring access to the same links. In addition to eliminating contention for scarce SPAN ports and test access points, multiple tools can be connected to the same link for redundancy, testing, or advanced monitoring applications.

Port Steering (Any-to-Any)
Any of the ports can be confi gured as input (network) or output (monitoring) ports on the fly through an easy to use command line interface (CLI) or Web-based management.


VS-1212-F
 
12 Port Any-to-Any Switch with Filtering & Load Balancing

VS-1224-F
 
24 Port Any-to-Any Switch with Filtering & Load Balancing

Accessori
SFP-SX 1G Multimode Fiber Transceiver (50 or 62.5µ)  
SFP-LX 1G Singlemode Fiber Transceiver (9µ)  
SFP-RJ45 10/100/1000BT Copper Transceiver  
SFP+-SR/SX SR Multimode 10G/1G Transceiver  
SFP+-LR/LX LR Singlemode 10G/1G Transceiver  

ANY TO ANY PORTS:
- Any-to-Any Ports: Twelve (12) (Supports SFP+ SR, LR, LRM, SFP SX, LX, BT)
- Management Port: RJ45
- Console Port: DB9

POWER REQUIREMENTS:
- Dual Redundant Hot Swappable Power Supplies (Included)
- Maximum Power Consumption: Less than 200 Watts
- Individual Power Supply Rating: 100-240V ~47-63Hz 4A MAX.

CERTIFICATIONS: CE, RoHS

DIMENSIONS (HxWxD): 1.72 x 19.00 x 21.00 in (4,4 x 48,3 x 53,3 cm)

WEIGHT: 18.15 lbs (8,23 kg)

ENVIRONMENTAL:
- Operating Temperature: 32° to 131°F (0° to 55°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C)
- Humidity: 5 to 95% non-condensing

FILTERING:
- IPv4 Address Sources and Destinations, Subnets
- MAC Address Sources and Destinations
- Ports
- Ethertype
- VLAN
- IPv6 Address Sources and Destinations, Subnets

WARRANTY: One (1) Year Hardware Warranty included

  • Port Steering Any-to-Any ports allow traffic aggregation and copies to multiple tools
  • SFP flexibility-supports copper and fiber media
  • Single point of deployment and remote management minimizes management expenses and reduces MTTR
  • Deploy tools right away without impacting your production network
  • Keep all your tools plugged in while troubleshooting
  • Easily share scarce SPAN ports and test access points without maintenance windows or approval
  • Provide immediate network access for new compliance monitors
VS-1212-F
Data Sheet PDF-File Data Sheet
VS-1212-F
Application Guide JPG - File Deployment
VS-1224-F
Data Sheet PDF-File Data Sheet
VS-1224-F
Application Guide JPG - File Deployment

Director - Foto Prodotto - Versastream 1G/10G SFP+/SFP NPB /w Filtering & Load Balancing
Versastream 1G/10G SFP+/SFP NPB /w Filtering & Load Balancing

Clicca per ingrandire - Director - Foto Prodotto - Versastream 1G/10G SFP+/SFP NPB /w Filtering & Load Balancing
12-24 Ports Any-to-Any Switch with Load Balancing. 8/16 1Gb ports and 4/8 10Gb ports. Flexible, Any-to-Any Line-Rate Hardware Based Load Balancing and Packet Filtering for Cost Effective Data Capture and Monitoring Applications.

Data Capture Infrastructure Optimizes Network Monitoring and Increases Efficiency
Networks are growing more complex, carrying more services, higher volumes of multi-protocol network traffic, and requiring greater bandwidth. At the same time, network and security personnel are required to monitor and analyze more links in greater detail throughout the network in order to meet application performance demands, minimize security threats, and meet regulatory compliance. Higher speed networks are being deployed, fueling the need for higher speed monitoring tools. Datacom Systems helps solve many of today's most pressing tool deployment problems by allowing organizations to conveniently connect 10G and 1G test and monitoring tools to any traffic on the network.

Load Balancing
Balance traffic across multiple ports to allow growth as the volume of data increases. Load balancing helps prevent loss of data by enabling deployment of redundant security tools that can back each other up, in the event of failure or during while their software updates. As links get faster, you need to be able to distribute traffic across lower speed analysis tools. Load balancing allows you to extend the life of existing lower speed devices as your network traffic increases.

Data Filtering
Instead of tools attempting to keep up with high-speed aggregates traffic streams, the VERSA stream can apply packet filters to the data to increase tool efficiency and eliminate port oversubscription. Line-rate hardware filtering on each port allows you to customize and streamline the amount and type of data each connected monitoring tool receives. Because they are receiving only traffic of interest, tools run faster, data is more manageable, and issues are resolved quicker. Command line filtering uses Wireshark based syntax.

Aggregation (Many-to-Any)
Many-to-Any monitoring access aggregates network traffic and provides visibility for one or more monitoring tools. Aggregate and reassemble full duplex conversations from one or more trunked links. Perfect for tools that don't support multiple monitoring interfaces or for redundant networks, EtherChannel, load balanced servers, and asymmetrically routed traffic.

Regeneration (Any-to-Many)
Any-to-Many configurations replicate copies of identical network traffic to provide multiple tools with monitoring access to the same links. In addition to eliminating contention for scarce SPAN ports and test access points, multiple tools can be connected to the same link for redundancy, testing, or advanced monitoring applications.

Port Steering (Any-to-Any)
Any of the ports can be configured as input (network) or output (monitoring) ports on the fly through an easy to use command line interface (CLI) or Web-based management.


VS-1112-F
 
12 Port Any-to-Any Switch with Filtering & Load Balancing

VS-1124-F
 
24 Port Any-to-Any Switch with Filtering & Load Balancing

Accessori
SFP-SX 1G Multimode Fiber Transceiver (50 or 62.5µ)  
SFP-LX 1G Singlemode Fiber Transceiver (9µ)  
SFP-RJ45 10/100/1000BT Copper Transceiver  
SFP+-SR/SX SR Multimode 10G/1G Transceiver  
SFP+-LR/LX LR Singlemode 10G/1G Transceiver  

ANY TO ANY PORTS:
- Eight (8) 1Gb ports and Four (4) 10Gb ports (Supports SFP+ SR, LR, LRM, SFP SX, LX, BT)
- Management Port: RJ45
- Console Port: DB9

POWER REQUIREMENTS:
- Dual Redundant Hot Swappable Power Supplies (Included)
- Maximum Power Consumption: Less than 200 Watts
- Individual Power Supply Rating: 100-240V ~47-63Hz 4A MAX.

CERTIFICATIONS: CE, RoHS

DIMENSIONS (HxWxD): 1.72 x 19.00 x 21.00 in (4.37 x 48.26 x 53.34 cm)

WEIGHT: 18.15 lbs (8.23 kgs)

ENVIRONMENTAL:
- Operating Temperature: 32° to 131°F (0° to 55°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C)
- Humidity: 5 to 95% non-condensing

FILTERING:
- IPv4 Address Sources and Destinations, Subnets
- MAC Address Sources and Destinations
- Ports
- Ethertype
- VLAN
- IPv6 Address Sources and Destinations, Subnets

WARRANTY: One (1) Year Hardware Warranty included, Advanced Replacement-Next Day, 3rd Business Day options available

  • Load Balancing - Balance sessions across multiple outputs for monitoring redundancy
  • 240 Gbps backplane
  • All ports active with full features- no per port licensing. Input from passive TAPs or SPANs.
  • Filtering - Line-rate hardware-based filtering can eliminate port oversubscription.
  • Filter on IPv4 Src/Dst Address, MAC Address, Protocol, Port, Ethertypes i.e. MPLS, VLAN, IPv6 Src/Dst Address
  • Aggregation/Regeneration - Combine multiple network links or channels into one stream or send copies to multiple connected tools to share data sources
  • Media Conversion - Leverage existing monitoring tools regardless of media type
  • Manage device remotely or locally with Web-based management (HTTPs) or extensive CLI (telnet/SSH)
  • SNMP v2c, v3c
  • RADIUS, TACACS+
VS-1112-F
Data Sheet PDF-File Data Sheet
VS-1112-F
Application Guide JPG - File Deployment
VS-1124-F
Data Sheet PDF-File Data Sheet
VS-1124-F
Application Guide JPG - File Deployment

Director - Foto Prodotto - Niagara 2804/2/1 Series - 10G Intelligent Active Bypass Switch
Niagara 2804/2/1 Series - 10G Intelligent Active Bypass Switch

Clicca per ingrandire - Director - Foto Prodotto - Niagara 2804/2/1 Series - 10G Intelligent Active Bypass Switch
The Niagara 2804 family is a 10 Gigabit Layer 2 - 4 Packet Broker/Hardware Load Balancer supporting up to Quad segments of 10 Gigabit Intelligent Active Bypass. The Niagara Packet Broker supports 16 multi-purpose SFP+ Ports for extensive packet filtering, distribution, aggregation and mirroring functionality.

The Niagara 2804 family is a 10 Gigabit Layer 2 - 4 Packet Broker/Hardware Load Balancer supporting up to Quad segments of 10 Gigabit Intelligent Active Bypass. The Niagara Packet Broker supports 16 multi-purpose SFP+ Ports for extensive packet filtering, distribution, aggregation and mirroring functionality.
These ports can support 1G SFP or 10G SFP+ media and can be assigned to any of the network segments. The system packet processing includes L2, L3 and L4 packet filtering, IP4 and IPV6 traffic, MPLS tunnel handling and supports the ability to customize filters and per port traffic for distribution.

The active bypass enables plug and play connectivity, includes an auto heartbeat and does not require additional drivers to be installed on connected appliances. The unit possesses management functionality that can be utilized via an extensive web GUI or CLI which enables flexibility and multiple configurations.
The Niagara 2804 passive bypass feature automatically switches the network traffic upon power failure of an attached in-line device, preserving network connectivity. The Niagara 2804 family is designed to integrate with UTM, Firewall, WAN Acceleration, QoS, IPS, IDS and Enterprise IT security appliances.

When Niagara 2804 bypass functionality detects an appliance malfunction such as a software crash, system failure or loss of power, the in-line traffic continues to flow through the network link, but is no longer routed through the in-line device. This ensures that network devices can be removed and replaced without network downtime.
Once the system is back up or the power is restored to the appliance, network traffic is seamlessly diverted back to the in-line device, allowing it to resume its critical functions. Alternatively, if an appliance connected to a primary segment fails and a secondary appliance is available, the bypass switch will pass all network traffic through the a defined secondary appliance providing redundant fail-over with minimal packet-loss until the primary appliance is restored.


Niagara 2804-SR
 
Quad segment Multi Mode active bypass system with 16 additional PacketMaster ports - NO SFP+ modules included on Niagara Packet Broker ports

Niagara 2804-LR
 
Quad segment Single Mode active bypass system with 16 additional PacketMaster ports - NO SFP+ modules included on Niagara Packet Broker ports

Niagara 2802-SR
 
Dual segment Multi Mode active bypass system with 12 additional PacketMaster ports - NO SFP+ modules included on Niagara Packet Broker ports

Niagara 2802-LR
 
Dual segment Single Mode active bypass system with 12 additional PacketMaster ports - NO SFP+ modules included on Niagara Packet Broker ports

Niagara 2801-SR
 
Single segment Multi Mode active bypass system with 10 additional PacketMaster ports - NO SFP+ modules included on Niagara Packet Broker ports

Niagara 2801-LR
 
Single segment Single Mode active bypass system with 10 additional PacketMaster ports - NO SFP+ modules included on Niagara Packet Broker ports

Operating Temperature: 0 to 55 °C or 32 to 131 °F

Operating Humidity: 5 to 95%

Maximum Power Consumption: 150 Watts

Airflow: 100 lf/m

Dimensions (LxHxW):
- 16.75 x 1.75 x 20.75 inches
- 425,45 x 44,45 x 527,05 mm

Essential Features

Niagara 2804 family provides major features that are essential in today's data centers:

  • 4 segments of bypass/failover functionality (also available in 1 and 2 segment options)
  • Active switching of traffic in case of system failure
  • Passive Bypass which is essential during power loss
  • High availability failover capabilities
  • 10 Gigabit Multi (SR) and Single (LR) mode support
  • 16 SFP+ Ports for extensive packet filtering, distribution, aggregation & mirroring
  • Support for SFP (SX, LX and TX) and SFP+ (SR, LR, ER) on inline appliance ports
  • Redundant internal power supplies for maximum reliability
  • Dedicated Management Port and Console Port
  • Extensive CLI and WEB based management (GUI)
  • SSH and HTTPS for secure Management
  • TACACS+ authentication
  • Syslog support
  • NTP support
  • Low power - 150 Watts
  • RoHS Compliant
  • EMC, FCC Class A, UL (Safety) Certifications
Filtering Definitions
  • MAC source and destination
  • IP source and destination
  • Protocol: HTTP, VoIP, FTP, etc.
  • VLAN ID
  • TCP port source and destination
  • UDP port source and destination
  • User Defined Byte (UDB)
Extensive Bypass Configuration

Niagara 2804 family allows for multiple bypass configurations including:

  • Bypass - fail open or fail close
  • Bypass heartbeat custom configurations including:
    • Heartbeat pattern
    • Heartbeat frequency
  • Bypass on link loss
  • Configuration of the number of link losses prior to activating bypass
  • Configuration of the number of heartbeats prior to disabling bypass
Highly Reliable

Niagara 2804 family utilizes two redundant internal power supplies for maximum reliability.

Niagara 2804 family deploys passive bypass along with active switching for fail safe operation.


Director - Foto Prodotto - Niagara 5002-8 - 10G Bypass Switch, Tap, NPB, DPI
Niagara 5002-8 - 10G Bypass Switch, Tap, NPB, DPI

Clicca per ingrandire - Director - Foto Prodotto - Niagara 5002-8 - 10G Bypass Switch, Tap, NPB, DPI
Niagara 5002-8 is a special function product that aids in enhancing network visibility. This product performs time-stamping and de-duplication in additions to packet slicing and load-balancing.

4 Segment Modular Intelligent Active Bypass and TAP

PLUG & PLAY
The Niagara 5002-8 is a network appliance that performs time-stamping, de-duplication, packet slicing, flow slicing, and flow-based load balancing. The load balancing is done with tunnel parsing based on the passenger packet. This system comes equipped with up to eight ports of 10G fiber with a management port. This system can handle up to 80Gbps of bidirectional traffic.
Packet slicing and flow slicing are features required and utilized by network monitoring, network forensics, network security and deep packet inspection (DPI) systems. Flexible packet slicing minimizes the amount of data required to be stored and processed on the networking tools while allowing the appliance to perform its functionality. Flow slicing provides better control of traffic and reduces the load for DPI tool when inspecting flows and protocols.
De-duplication eliminates multiple copies of packets, to reduce the amount of data that needs to be put into storage or transferred to monitoring devices within the network. Time-stamping is essential for network forensics and security applications. For performance monitoring, as more transactions occur on a network, time-stamping becomes necessary in order to be able to pinpoint where communication delays or latencies are happening, which allows for the network to be optimized. The Niagara 5002-8 is designed to run in conjunction with a broad range of applications, including security, performance monitoring, networking forensics, lawful intercept, storage and data center server appliances.


Niagara 5002-8
 
10G Bypass Switch, Tap, Network Packet Broker, Deep Packet Inspection (DPI)

Operating Temperature: 0 to 40°C or 32 to 104°F

Operating Humidity: 5 to 95%

Maximum Power Consumption: Less than 47 W

Airflow: 100 lf/m

Dimensions (LxHxW):
- 12.00 x 1.75 x 16.75 inches
- 279,4 x 44,5 x 425,5 mm

Key Features and Components
  • Time stamping at 10G rates at Nano-second granularity
  • Packet De-duplication per flow
  • Load Balancing
  • Tunnel handling, supported during Load-balancing
    • VLAN
    • Q-Q
    • MPLS, Multi MPLS
    • IP-in-IP
    • GTP-U
    • GRE-1/2
  • Configurable Flow Slicing and Packet Slicing
  • Eight dual speed SFP+ Ports (SR or LR)
  • Two Redundant hot pluggable power supplies
  • One Management
  • 1U chassis
  • Full RoHS Compliance
  • EMC, FCC Class A, UL (Safety) Certifications

Director - Foto Prodotto - Niagara 4272 Series - 10G 72 Port Niagara Packet Broker
Niagara 4272 Series - 10G 72 Port Niagara Packet Broker

Clicca per ingrandire - Director - Foto Prodotto - Niagara 4272 Series - 10G 72 Port Niagara Packet Broker
The Niagara 4272 is a 72 port 10 Gigabit Network Packet Broker, hardware based traffic distribution and load balancing system. The Traffic Distribution and Load Balancing has flexible and extensive configuration options.
The system can support distribution and filtering for L2-L4 IP traffic, MPLS tunneling and it provides the ability to customize key for distribution. The 72 ports support 1 gigabit or 10 Gigabit Ethernet with SFP and SFP+ support including multi mode, single mode and extended mode fiber.

The Niagara 4272 is a 72 port 10 Gigabit Network Packet Broker, hardware based traffic distribution and load balancing system. The Traffic Distribution and Load Balancing has flexible and extensive configuration options.

The system can support distribution and filtering for L2-L4 IP traffic, MPLS tunneling and it provides the ability to customize key for distribution. The 72 ports support 1 gigabit or 10 Gigabit Ethernet with SFP and SFP+ support including multi mode, single mode and extended mode fiber.

Due to its versatility and flexibility the system can support mirroring to multiple ports aggregation of multiple ports to a single port and an extensive filtering engine. There are several load balancing methodologies supported which enable traffic to be distributed according to any configured output of ports and the distributing key can be defined as follow:

  • VLAN ID -- packets belonging to the same VLAN will be redirected to the same port.
  • IP-Src -- packets belonging to the same IP source will be redirected to the same port.
  • IP-Dst -- packets belonging to the same IP destination will be redirected to the same port.
  • MAC-Src -- packets belonging to the same MAC source will be redirected to the same port.
  • MAC-Dst -- packets belonging to the same MAC destination will be redirected to the same port.
  • TCP-Port -- packets with the same TCP port will be redirected to the same port.
  • UDP-Port -- packets with the same UDP port will be redirected to the same port.
  • User Defined Byte (UDB) - where the key for distribution is configurable and all the packets with
    the same key will be redirected to the same port. The number of ports is configurable


Niagara 4272
 
72 Ports 10GbE Niagara Packet Broker

Operating Temperature: 0 to 45°C or 32 to 113°F

Operating Humidity: 5 to 95%

Maximum Power Consumption: 500 Watts

Airflow: 200 lf/m

Dimensions (LxHxW):
- 24.50 x 1.75 x 17.25 inches
- 622,30 x 44,45 x 438,15 mm

Key Features
  • Load balancing according to multiple key definitions
  • MPLS, Q in Q support
  • Session aware load balancing
  • User defined bytes for filtering
  • Port failover mechanism
  • Counters for ingress and egress traffic
  • RMON statistics
  • TACACS+ for centralized authentication
  • Syslog for events logging
  • SNMP management and reporting
  • CLI and Web-based management and configuration
  • Mirroring of one to many and any to any
  • Secure logging and secure management
  • Support for a total of 2,000 filtering and redirection rules
  • Support for GRE and GTP*
  • Support IPv6 filtering
System Characteristics
  • Max system throughput 1.44Tbps
  • Support for SFP and SFP+, LS, LR, SX, LX, TX, ER
  • Low power - 500 Watts
  • 1U chassis
  • Serial console and Ethernet management port

Director - Foto Prodotto - Niagara 2841 Series - 40G Single Segment Intell. Active Bypass Sw.
Niagara 2841 Series - 40G Single Segment Intell. Active Bypass Sw.

Clicca per ingrandire - Director - Foto Prodotto - Niagara 2841 Series - 40G Single Segment Intell. Active Bypass Sw.
The Niagara 2841 Family contains a single segment of 40 Gigabit Intelligent Active Bypass with support for 10 Gigabit Layer 2 - 4 Hardware Load Balancer/PacketMaster Capabilities. The passive bypass feature automatically switches the network traffic upon power failure of an attached in-line device, preserving network connectivity. The loadbalaning/PacketMaster capabilites supports 8 multi-purpose SFP+ ports for extensive packet filtering and slicing, distribution, aggregation and mirroring functionality. These ports can support 1G SFP or 10G SFP+ media and can be assigned to any of the network segments. The family can support up to 5 appliances.

Niagara 2841 is a single segment of 40 Gigabit Intelligent Active Bypass with support for 10 Gigabit Layer 2 – 4 Hardware Load Balancer / PacketMaster capabilities. The active bypass enables plug and play connectivity, includes an auto heartbeat and does not require additional drivers to be installed on connected appliances. The passive bypass feature automatically switches the network traffic upon power failure of an attached in-line device, preserving network connectivity.
The loadbalaning/PacketMaster capabilites supports 8 multipurpose SFP+ Ports for extensive packet filtering and slicing, distribution, aggregation and mirroring functionality. These ports can support 1G SFP or 10G SFP+ media and can be assigned to any of the network segments. The system packet processing includes L2, L3 and L4 packet filtering, IP4 and IPV6 traffic, MPLS tunnel handling and supports the ability to customize filters and per port traffic for distribution.
The unit possesses management functionality that can be utilized via an extensive web GUI or CLI which enables flexibility and multiple configurations. The Niagara 2841 is designed to integrate with UTM, Firewall, WAN Acceleration, QoS, IPS, IDS and Enterprise IT security appliances.

When Niagara 2841 bypass functionality detects an appliance malfunction such as a software crash, system failure or loss of power, the in-line traffic continues to flow through the network link, but is no longer routed through the in-line device. This ensures that network devices can be removed and replaced without network downtime. Once the system is back up or the power is restored to the appliance, network traffic is seamlessly diverted back to the in-line device, allowing it to resume its critical functions.
Alternatively, if an appliance connected to a primary segment fails and a secondary appliance is available, the bypass switch will pass all network traffic through the a defined secondary appliance providing redundant fail-over with minimal packetloss until the primary appliance is restored.


Niagara 2841-SR
 
40 Gigabit Multi-Mode Fiber Intelligent Active Bypass Switch with 8 10Gb Loadbalancing ports

Niagara 2841-LR
 
40 Gigabit Single-Mode Fiber Intelligent Active Bypass Switch with 8 10Gb Loadbalancing ports

Operating Temperature: 0 to 55 °C or 32 to 131 °F

Operating Humidity: 5 to 95%

Maximum Power Consumption: 125 Watts

Airflow: 100 lf/m

Dimensions (LxHxW):
- 16.75 x 1.75 x 20.75 inches
- 425,45 x 44,45 x 527,05 mm

Key Features
Niagara 2841 Family provides major features that are essential in today’s data centers:
  • Active Bypass in case of system failure
  • Passive Bypass which is essential during power loss
  • Multi Mode fiber and Single Mode fiber support on the Network side
  • 40 Gigabit Multi Mode (SR), Single mode (LR) and Direct Attached support on the appliance side
  • Optional 8 Link Aggregation TAP Ports
  • Redundant, hot-swappable internal power supplies for maximum reliability:
  • AC and DC support
  • Dedicated Management Port and Console Port
  • Extensive CLI and WEB based management
  • SSH and HTTPS for secure Management
  • TACACS+ authentication
  • Syslog support
  • NTP support
  • Full RoHS compliance
  • EMC, FCC Class A, UL (Safety) Certifications
Extensive Bypass Configuration
Niagara 2841 Family allows for multiple bypass configurations including:
  • Bypass - fail open or fail close
  • Bypass heartbeat custom configurations including:
    • Heartbeat pattern
    • Heartbeat frequency
  • Bypass on link loss
  • Configuration of the number of link losses prior to activating bypass
  • Configuration of the number of heartbeats prior to disabling bypass
Management Software
Niagara 2841 Family management supports:
  • Web based management via a secure HTTPS connection
  • Extensive CLI interface
  • SSH connectivity over the management port
  • SNMP traps on defined events
  • E-mail notification on defined events
  • TACACS+ authentication
  • Syslog support
These capabilities provide a simple, secure and easy way to maintain, monitor and manage the appliance and the network.

Highly Reliable
Niagara 2841 Family utilizes two redundant hot swappable power supplies for maximum reliability. Niagara 2841 Family deploys passive bypass along with active switching for fail safe operation.

Director - Foto Prodotto - Niagara 2845 - 10G/40G/100G 8 Segm.  Bypass Switch, Tap, NPB
Niagara 2845 - 10G/40G/100G 8 Segm. Bypass Switch, Tap, NPB

Clicca per ingrandire - Director - Foto Prodotto - Niagara 2845 - 10G/40G/100G 8 Segm.  Bypass Switch, Tap, NPB
Niagara 2845 is a modular 10/40/100 Gigabit Network Packet Broker, Intelligent Active Bypass Switch and TAPs system.

The Niagara 2845 can support up to 4 hot-pluggable, field-replaceable modules that can be either 1G/10G/40G/100G TAPs (supporting 50:50, 40:60, 30:70, 20:80 ratios) or 1G/10G/40G/100G Bypass segments or NPB modules. The active bypass functionality enables plug and play connectivity, includes an auto heartbeat and does not require additional drivers to be installed on connected appliances. The unit possesses management functionality that can be utilized via an extensive web GUI or CLI which enables flexibility and multiple configurations.

The Niagara 2845 passive bypass feature automatically switches the network traffic upon power failure of an attached in-line device, preserving network connectivity. The Niagara 2845 is designed to integrate with UTM, Firewall, WAN Acceleration, QoS, DPI, IPS, IDS and Enterprise IT security appliances. When Niagara 2845 bypass functionality detects an appliance malfunction such as a software crash, system failure or loss of power, the in-line traffic continues through the network link, but is no longer routed through the in-line device. This ensures that network devices can be removed and replaced without network downtime. Once the system is back up or the power is restored to the appliance, network traffic is seamlessly diverted back to the in-line device, allowing it to resume its critical functions.


Niagara 2845
 
10/40/100G 8 Segment Modular Intelligent Active Bypass Switch, Network Tap, Network Packet Broker

Essential Features
  • Up to 8 10Gb/1Gb network segments, up to 4 40Gb networks segments or up to 2 100G network segments of bypass/failover with PacketMaster functionality
  • Active switching of traffic in case of system failure
  • Passive Bypass which is essential during power loss
  • Flexible Support for SFP (SX, LX and TX) and SFP+ (SR, LR, ER) and QSFP28 on non-network ports
  • Modular 1U form factor flexibility and scalability
  • Redundant hot-swappable power supplies for maximum reliability
  • Dedicated Management Port and Console Port
  • Extensive CLI and WEB based management (GUI)
  • SSH and HTTPS for secure Management
  • TACACS+ authentication
  • Syslog support
  • NTP support
  • RoHS Compliant
  • FCC Class A, UL & CE Certifiable
Filtering Definitions
  • MAC source and destination
  • IP source and destination
  • Protocol: HTTP, VoIP, FTP, etc.
  • VLAN ID
  • TCP port source and destination
  • UDP port source and destination
  • User defined Byte (UDB)
Extensive Bypass Configuration
Niagara 2845 allows for multiple bypass con gurations including:
  • Bypass - fail open or fail close
  • Bypass heartbeat custom con gurations including:
    • Heartbeat pattern
    • Heartbeat frequency
  • Bypass on link loss
  • Configuration of the number of link losses prior to activating bypass
  • Configuration of the number of heartbeats prior to disabling bypass
Highly Reliable Niagara 2845 utilizes two redundant hot-swappable power supplies for maximum reliability. Niagara 2845 deploys passive bypass along with active switching for fail safe operation.

Director - Foto Prodotto - 1G/10G/40G/100G Net Tool Optimizer - NTO 7300 Family
1G/10G/40G/100G Net Tool Optimizer - NTO 7300 Family

Clicca per ingrandire - Director - Foto Prodotto - 1G/10G/40G/100G Net Tool Optimizer - NTO 7300 Family
7U scalable network visibility chassis

Ixia Net Tool Optimizer 7300 A New Perspective on Network Visibility

The Network Tool Optimizer (NTO) 7300 delivers a new perspective on network visibility without the need for crash carts or change requests to get the right data to the right tools - right now.

This versatile solution and Ixia’s Visibility Architecture provide the most scalable network visibility framework in the industry. Together, they deliver the expandability and management flexibility that easily integrate into any network or data center environment. This visibility solution also offers the control and simplicity necessary to improve the usefulness of existing IT tools.

The NTO 7300 (and NEBS 3 Certified 7303) chassis enables centralized control of your network monitoring system in a single, simple, rack-mountable unit. It combines disparate solutions into a smaller data center footprint, saving power and rack space while improving ROI. Designed for large enterprises and service providers, the NTO 7300 meets the provider need for monitoring and network security tools to achieve end-to-end network visibility across both physical and virtual networks. This unprecedented visibility protects tool investments and scales with the network as monitoring needs grow, new applications debut, and security threats emerge.

The NTO 7300 fills a critical visibility gap in today’s organizations, helping them leverage existing tool investments and achieve total application and network visibility. This new platform allows network teams to deliver on their service level agreements (SLAs), meet their key performance indicators (KPIs), and provide best-in-class end-user service.

  • High Density - up to 384 ports of 10GE, 96 ports of 40GE, or 12 ports or 100GE in 7U, including up to 192 ports of 10GE AFM (Advanced Functionality)
  • High Performance - Over 3.8Tb of backplane capacity for wire-speed performance in any configuration
  • Scalable, modular architecture grows with your needs and maximize tool investments
  • High availability with redundant power supplies, fans, and supervisors, or available in single supervisor version.


SYS-7300-STD
 
7300 Series Net Tool Optimizer - base system is the chassis assembly only

SYS-7300-96X-10G
 
7300 Series Net Tool Optimizer - Base system includes 96 licensed ports of 10G SFP+ with AC power supply

SYS-7300-SSV
 
7300 Series Net Tool Optimizer - Single Supervisor base system is the chassis assembly only

SYS-7303-STD
 
7303 Net Tool Optimizer NEBS - certified base system is the chassis assembly only

MOD-7300-SUPERVISOR
 
7300 Supervisor module 7300 Series - Supervisor module provides control and fabric connections between line modules

MOD-7210-IFMOD-10G
 
7300 Series - single (1) 48-port interface module

MOD-7310-IFMOD-40G
 
7300 Series - single (1) 16-port 40G QSFP+ module

MOD-7211-ATP
 
7300 Series - Single (1) 48-port Application and Threat Intelligence Processor interface module

MOD-7212-PCM
 
7300 Series - Single (1) 48-port Packet Capture Module interface module

MOD-7300-CARRIER
 
7300 Series - Carrier Line Module

MOD-7420-IFMOD-100G
 
7300 Series - Single 100G port interface cassette - supports a single 100G CFP port

MOD-7215-IFMOD-AFM16
 
7300 Series - 16-Port 10G Advanced Feature Module Cassette

MOD-7311-IFMOD-AF
 
7300 Series - 8x40G and 16x10G NetPort Advanced Feature Module

RPS-7300-AC
 
7300 Series - AC (4800W) remote power supply system for the 7300 chassis

RPS-7300-ACMOD
 
7300 Series - Single AC (1200W) power module for 7300 remote power supply system

MOD-7300-FANMOD
 
7300 Series - Single (1) fan module unit

ACC-7300-FILTER
 
7300 Series - 1 year supply of air filter for the 7300 chassis

LIC-P7300-X48D
 
7300 Series 10G SFP+ Ports License

LIC-P7300-Q16D
 
7300 Series - 40G QSFP+ Ports License

LIC-P7300-Q8D-X16D
 
7300 Series - 40G QSFP+ (8) and 10G SFP+ (16) port license. Enables eight (8) 40G and sixteen (16) 10G ports. (Transceivers not included)

LIC-7300-ATI
 
7300 Series - ATI (Application and Threat Intelligence) Processor One - Year License

LIC-P7300-Q8D-AN
 
7300 Series - 40G QSFP (8) Advanced Feature NetPort license

LIC-P7300-X16D-AN
 
7300 Series - 10G SFP+ (16) Advanced Feature NetPort license

Accessori
MOD-7300-SMARTBLANK Smart blank module for NTO 7300 series  
MOD-7300-PTPALARM NTO 7300 series - Alarm and 1588 (PTP) timestamp source.The module provides phyical connections for external alarms and a 1588 timestamp source for the chassis modules.  
Key Features:
  • 7U chassis with 6 line cards
  • Up to 384 ports of 10GE
  • Up to 96 ports of 40GE
  • Up to 12 ports of 100GE
  • Up to 192 ports of 10GE FM
  • Fully redundant supervisors, fans, and power
  • Front-to-back airflow
  • NEBS ready
  • Multi-user permissions with concurrent access
  • Automated filter compiler improves automation and speeds configuration
Performance:
  • 1, 10, 40, 100GbE support
  • Fully non-blocking 3.8Tb backplane in all line card configurations
  • Full line-rate across all ports with filtering enabled
  • Port reconfiguration with no performance impact

Director - Foto Prodotto - 1G/10G/40G/100G Net Tool Optimizer - NTO 5293
1G/10G/40G/100G Net Tool Optimizer - NTO 5293

Clicca per ingrandire - Director - Foto Prodotto - 1G/10G/40G/100G Net Tool Optimizer - NTO 5293
Robust Switching and End-to-End Visibility for Carrier-Grade Networks

Ixia´s Net Tool Optimizer® (NTO) 5293 helps telecommunications providers connect multiple network monitoring tools efficiently to a large number of 100G, 40G, 10G, and 1G interfaces. This carrier grade, high-density network monitoring switch delivers end-to-end visibility into the packet network. The Ixia NTO 5293 is reliable and easy to use for access to intelligence in highly complex, mission-critical networks, including the 4G LTE packet core. Preserving original encapsulation, the 5293 filters traffic to the monitoring tools based on tunneled traffic.

The versatile 5293 switch has a 640G, non-blocking backplane for up to 4 100G ports, 16 40G ports or up to 64 10G ports in a space-efficient 2-rack unit chassis. Certified for NEBS Level 3, the switch delivers uninterrupted access to network traffic for monitoring tools in telecommunications environments. To meet the need for high availability, the 5293 features redundant management ports, power supplies and fan trays.

As telecommunications and mobile carrier networks evolve and become more complex, so too have the systems and processes that monitor them. Monitoring is vital to quality of service and customer support; today’s challenge is to reduce network monitoring complexity and streamline access to all network monitoring technologies. The NTO 5293 fills the need for a carrier-grade, high-density network monitoring switch that helps mobile carrier network engineers efficiently connect multiple network monitoring tools to large numbers of 100GE, 40GE, 10GE, and 1GE interfaces, achieving end-to-end visibility into the packet network.


SYS-5293-STD
 
Anue 5293 Net Tool Optimizer-base system

SYS-5293-ALL-10G
 
Anue 5293 Net Tool Optimizer-base system with all ports enabled: 64 1GE/10GESFP/SFP+ ports, Includes & 4-16-port interface modules

SYS-5293-GIG-ALL
 
Anue 5293-Gig All Net Tool Optimizer - 1GE system with all ports enabled: 60 1GE SFP ports, and four 10GE SFP/SFP+ ports Interface Modules

MOD-529X-IFMOD-10G
 
Single (1) 5293 16-port interface module - supports up to 16 SFP/SFP+ ports

MOD-529X-IFMOD-40G
 
Single (1) 5293 4-port interface module - supports up to 4 QSFP+ ports

MOD-529X-IFMOD-100G
 
Single (1) 5293 1-port interface module - supports one 100G CFP port. Includes port license.

MOD-529X-ACMOD
 
Single (1) AC power module

MOD-529X-DCMOD
 
Single (1) DC power module

MOD-529X-FANMOD
 
Single (1) fan module unit

ACC-5293-FILTER
 
1 year supply of air filters for the 5293 chassis

ACC-5200-RBRACKET-19
 
4-Post 19" Bracket Extender 30"-42". Front brackets are included with system

ACC-5200-RBRACKET-23
 
4-Post 23" Bracket Extender 30"-42". Front brackets are included with system

LIC-529X-UPGRD
 
Upgrades licensed and unlicensed 1G SFP ports to 1G SFP+ ports. This provides customer the ability to enable 10G SFP+ port capability if they purchase 10G/1G SFP+ licenses. This upgrade also provides the ability to install 40G QSFP+ interface modules. NOTE: 10GE SFP+ and 40GE QSFP+ licenses are NOT included.

LIC-P5200-G1D
 
1GE SFP Port - quantity One (transceiver not included)

LIC-P5200-G4D
 
1GE SFP Ports - quantity Four (transceiver not included)

LIC-P5200-G8D
 
1GE SFP Ports - quantity Eight (transceiver not included)

LIC-P5200-G15D
 
1GE SFP Ports - quantity Fifteen (transceiver not included)

LIC-P5200-X1D
 
10GE SFP+ Port - quantity One (transceiver not included)

LIC-P5200-X4D
 
10GE SFP+ Ports - quantity Four (transceiver not included)

LIC-P5200-X8D
 
10GE SFP+ Ports - quantity Eight (transceiver not included)

LIC-P5200-X15D
 
10GE SFP+ Ports - quantity Fifteen (transceiver not included)

LIC-P5200-Q1D
 
40GE QSFP+ Port - quantity One (transceiver not included)

LIC-P5200-Q4D
 
40GE QSFP+ Ports - quantity Four (transceiver not included)

LIC-P5200-Q8D
 
40GE QSFP+ Ports - quantity Eight (transceiver not included)

LIC-P5200-X1D-UP
 
Upgrade 1GE SFP port to 10GE/1GE SFP+ port - quantity One (transceiver not included)

LIC-5288-SPARE
 
Anue 5288/5293 Net Tool Optimizer - Cold spare system license

MOD-P5200-X8D-ADV
 
8 x 10G Optical SFP+ Ethernet Port Advanced Feature Module

MOD-P5200-X16D-ADV
 
16 x 10G Optical SFP+ Ethernet Port Advanced Feature Module

LIC-P5200-X8D-ADV-UP
 
Upgrade MOD-P5200-X8D-ADV Advanced Feature Module to MOD-P5200-X16D-ADV

Accessori
N-SM1310-PLUS 10GE SFP+ Optical Transceiver - LR 1310nm (10km)  
N-MM850-PLUS 10GE SFP+ Optical Transceiver - SR 850nm (300 meters)  
N-CGI 1GE SFP Copper Transceiver  
N-SM1310 1GE SFP Optical Transceiver - LX 1310nm (10km)  
N-MM850 1GE SFP Optical Transceiver - SX 850nm (550 meters)  
High-Availability Features
  • NEBS Level 3 Certified Product
  • Redundant, Hot-Swappable Power Supply / Fan Modules
  • -48V DC or 120-240VAC Power Input
  • Front to Back Air Flow
  • Local and Remote Alarm Relay Support
  • Redundant Management Ports
  • Craft Interface for Emergency Out-of-Band Reset
Performance
  • 100GE, 40GE, 10GE, 1GE Ethernet support
  • Non-blocking architecture; 640Gbps total bandwidth
  • Full line-rate across all ports with filtering enabled
  • Port reconfiguration with no performance impact

Director - Foto Prodotto - ControlTower Supervisor - NTO 5260
ControlTower Supervisor - NTO 5260

Clicca per ingrandire - Director - Foto Prodotto - ControlTower Supervisor - NTO 5260
SPs and large enterprises can manage complex, distributed environments easily from a single user interface

Ixia´s ControlTower™ architecture solves major challenges facing network administrators, such as visibility, the need for rapid scaling, flexible deployments, and network-wide application and security monitoring. Based on the innovative ControlTower architecture, the ControlTower Supervisor NTO 5260 and ControlTower Member NTO 5268 (with all functions centrally managed by the Supervisor) are a significant management advance.

Now, the ControlTower Supervisor NTO 5260 reveals the entire architecture on a single pane of glass. This centralized management solution features the most intuitive and easiest-to-use drag-and-drop interface in the industry. This interface enables complete configuration of the system with no special training or preparation. Software updates and licensing can be performed quickly and efficiently across all ControlTower cluster devices.

Important performance and efficiency features, such as a RESTful API and IPv6 (supported with NVOS 4.1 and later versions), make ControlTower the perfect solution for service providers and large enterprises. The ControlTower Supervisor works in 40GE/10GE networks and is designed for robust, complex data centers and central offices.


SYS-5260-STD
 
Anue 5260 ControlTower Supervisor base system. This includes the following: 1x 5260 ControlTower Supervisor chassis, 1x 5260 ControlTower Supervisor management module, 3x 526X fan modules, 4x 4-port 40G QSFP modules

MOD-526XACMOD
 
Single(1) AC Power Module

MOD-526XDCMOD
 
Single(1) DC Power Module

MOD-526XFANMOD
 
Single (1) fan module unit

Accessori
Anue 5268 ControlTower Member base system. This part is sold as an upgrade to a ControlTower System. Includes the following: 1x 5268 ControlTower Member chassis, 1x 5268 ControlTower Member management module, 3x 526X fan modules, 1x 4-port 40G QSFP module Anue 5268 ControlTower Member base system. This part is sold as an upgrade to a ControlTower System. Includes the following: 1x 5268 ControlTower Member chassis, 1x 5268 ControlTower Member management module, 3x 526X fan modules, 1x 16-port 10G SFP+ module Single(1) AC Power Module Single(1) DC Power Module Single (1) fan module unit Single 526X 16-port interface module. Supports up to 16 SFP/SFP+ optical modules. 16-port 1/10G licensed is included. Single 526X 4-port interface module. Supports up to 4 QSFP+ optical modules. 4-port 40G licensed is included. 8 x 10G Optical SFP+ Ethernet Port Advanced Feature Module 16 x 10G Optical SFP+ Ethernet Port Advanced Feature Module Upgrade MOD-P5200-X8D-ADV Advanced Feature Module to MOD-P5200-X16D-ADV
SYS-5268Q-STD Anue 5268 ControlTower Member base system. This part is sold as an upgrade to a ControlTower System. Includes the following: 1x 5268 ControlTower Member chassis, 1x 5268 ControlTower Member management module, 3x 526X fan modules, 1x 4-port 40G QSFP module  
SYS-5268S-STD Anue 5268 ControlTower Member base system. This part is sold as an upgrade to a ControlTower System. Includes the following: 1x 5268 ControlTower Member chassis, 1x 5268 ControlTower Member management module, 3x 526X fan modules, 1x 16-port 10G SFP+ module  
MOD-526X-ACMOD Single(1) AC Power Module  
MOD-526X-DCMOD Single(1) DC Power Module  
MOD-526X-FANMOD Single (1) fan module unit  
MOD-526X-IFMOD-10G Single 526X 16-port interface module. Supports up to 16 SFP/SFP+ optical modules. 16-port 1/10G licensed is included.  
MOD-526X-IFMOD-40G Single 526X 4-port interface module. Supports up to 4 QSFP+ optical modules. 4-port 40G licensed is included.  
MOD-P5200-X8D-ADV 8 x 10G Optical SFP+ Ethernet Port Advanced Feature Module  
MOD-P5200-X16D-ADV 16 x 10G Optical SFP+ Ethernet Port Advanced Feature Module  
LIC-P5200-X8D-ADV-UP Upgrade MOD-P5200-X8D-ADV Advanced Feature Module to MOD-P5200-X16D-ADV  
Anue 5263 ControlTower Member base system. This part is sold as an upgrade to a ControlTower System. Includes the following: 1x 5263 ControlTower Member chassis, 1x 5263 ControlTower Member management module, 3x 526X fan modules, 1x 4-port 40G QSFP module Single(1) AC Power Module Single(1) DC Power Module Single (1) fan module unit Single 526X 16-port interface module. Supports up to 16 SFP/SFP+ optical modules. 16-port 1/10G licensed is included. Single 526X 4-port interface module. Supports up to 4 QSFP+ optical modules.4-port 40G licensed is included. 8 x 10G Optical SFP+ Ethernet Port Advanced Feature Module 16 x 10G Optical SFP+ Ethernet Port Advanced Feature Module Upgrade MOD-P5200-X8D-ADV Advanced Feature Module to MOD-P5200-X16D-ADV
SYS-5263Q-STD Anue 5263 ControlTower Member base system. This part is sold as an upgrade to a ControlTower System. Includes the following: 1x 5263 ControlTower Member chassis, 1x 5263 ControlTower Member management module, 3x 526X fan modules, 1x 4-port 40G QSFP module  
MOD-526XACMOD Single(1) AC Power Module  
MOD-526XDCMOD Single(1) DC Power Module  
MOD-526XFANMOD Single (1) fan module unit  
MOD-526XIFMOD-10G Single 526X 16-port interface module. Supports up to 16 SFP/SFP+ optical modules. 16-port 1/10G licensed is included.  
MOD-526XIFMOD-40G Single 526X 4-port interface module. Supports up to 4 QSFP+ optical modules.4-port 40G licensed is included.  
MOD-P5200-X8D-ADV 8 x 10G Optical SFP+ Ethernet Port Advanced Feature Module  
MOD-P5200-X16D-ADV 16 x 10G Optical SFP+ Ethernet Port Advanced Feature Module  
LIC-P5200-X8D-ADV-UP Upgrade MOD-P5200-X8D-ADV Advanced Feature Module to MOD-P5200-X16D-ADV  
Key Features
  • Provides end-to-end view across the ControlTower Network Visibility Architecture
  • Supports 40Gb and 10Gb trunk links
  • Scalable, modular configuration
  • Non-blocking switch architecture: share traffic anywhere within a ControlTower cluster from any network access point to any monitoring tool at full line rate
  • High availability with redundant management ports, power supplies, and hot-swappable fan modules
  • Green solution: 2U form factor, front-to-back airflow, and low power footprint
  • Provides a consolidated, single view and managerial access point for all of your NTO monitoring switches
  • NEBS Level 3 certification with redundant power supplies
  • RESTful webAPI allows the NTO to be incorporated as part of your central office/ data center automation initiatives like consolidated management, centralized provisioning and service orchestration
  • External alarm connections available for integration to your central office alarms
  • IPv6 provides extended IP addressing support

Director - Foto Prodotto - Indigo Pro - Network Management Appliance
Indigo Pro - Network Management Appliance

Clicca per ingrandire - Director - Foto Prodotto - Indigo Pro - Network Management Appliance
Meet the challenge of managing large monitoring deployments with Indigo Pro, a network management appliance tailored for centralized management of large numbers of Ixia/Net Optics monitoring access devices.

As traffic grows, today’s networks deploy an architecture of dozens - even hundreds - of Taps and data monitoring switches. Along with that growth comes the urgent need to manage those devices. Now, Indigo Pro gives you a centralized solution to configure and monitor Taps, virtual Taps, data monitoring switches, and network controller switches, for a streamlined, responsive, and coordinated approach to management.

Indigo Pro makes administration easier and more precise than ever before, whatever your current or planned number of appliances, both virtual and physical. This rich-featured platform just enabled even greater network visibility and security threat management. Indigo Pro is the ideal management solution - robust, comprehensive and flexible for managing few or many wired, wireless, and virtual solutions.

Now your management and planning capabilities can keep pace with growth, and plan for administering future growth too. Indigo Pro works as a physical or virtual solution in VMware or Xen-compatible environments. It deploys instantly using Hypervisor tools - no rack space needed; no added power or cabling cost and you save licensing fees too.

Easy to Deploy with Automated Device Discovery
Get up and running fast with fully automatic identification of supported Net Optics and third-party devices across the network. Add or remove devices and Indigo Pro adapts accordingly.

See It All at a Glance
Indigo Pro’s dynamic network topology map displays “up” or “down” status of your supported devices. Simply click on an icon to drill down to detailed device status—plus see the status of attached links.

New! Manage More Devices, Clusters and Daisy Chains
Stay ahead of growing network demands and manage more Net Optics and third-party devices, even clusters and daisy chains; bring up any port with a click. Set parameters like IP address and schedule bulk software upgrades easily.

Troubleshoot and Resolve
When faults do occur, Indigo Pro collects and displays event messages and generates alerts. Users can identify threshold-triggered events and take action. You can also create and configure filters on any administered devices.

More ways to display
Chose from 120 graphs, plus new charts, dashboards, enriched graphics and presentation options - all easy to launch. Gather data in real time, archive it in a database for trend analysis and display it in vivid, understandable browser format. Network professional or business user, you can deliver vital network information perform capacity planning and keep compliance records. Define your own views - even create a “home page” to save time at login and find out relevant data faster.

Network Knowledge Is Power
Instantly view the statistics that determine network health: bandwidth utilization, byte and packet counts, errors, and jumbo frames and more - by device.

The Optimal Security Solution
Indigo Pro is ideal for handling security-related issues: all user actions are inspected and audited against a permissions profile and logged to an audit trail. The system’s three-layer security system is advanced and comprehensive.

- Authenticated, encrypted sessions between client browser and server
- User authentication by a login password and user name
- Role-based access control and device locking

Coming Soon:
- Supported devices backup and restore
- Cloud-based updates for IP appliance and supported managed devices
- Support for xStream devices


Read more ...


IP-2050M - IP-2102M
 
Indigo Pro Manager 50-1000 Nodes

IP-VA025M - IP-VA0500M
 
Indigo Pro Manager Virtual 25-500 Nodes

Functional

Device discovery: automatic, fast

Data visualization: snapshot and historical; utilization, total bytes, total packets, Jumbo packets CRC errors; dashboard views

Dashboard: up to 9 graphs

Security: profile-based permissions and views; comprehensive audit trail; role-based access control

Network topology map: organized by subnet

Data export: print, export to CSV file

Device management (device dependent): port settings, device system settings, device user accounts

Event logging and Fault management: device dependent

Scheduler: schedule bulk device software upgrades


Operating

Operating Temperature: 0°C to 35°C

Storage Temperature: -10°C to 70°C

Relative Humidity: 10% min, 95% max, non-condensing


Mechanical

Dimensions: 1.75" high x 23.5" deep x 19"wide

Mounting: 19" rack mount (1U)

Weight: 26 lbs (11.8kg)


Electrical Specifications

Power: 100-240VAC, 47-63Hz 650W PFC

Redundancy: Dual modules

Maintenance: Power supplies are hot-swappable


Indicators

Power, disk activity, network 1 activity, network 2 activity, over temperature warning


Certifications

FCC, CE, VCCI, and C-Tick certified

Fully RoHS and WEEE compliant


Supported Web Browsers

Internet Explorer, Firefox, Safari

Note: Java support must be enabled in the browser


Supported Devices

Net Optics Director models

Net Optics Director Pro models


Net Optics xBalancer

Net Optics iTap 10 GigaBit Fiber Port Aggregator

Net Optics iTap GigaBit Fiber Port Aggregator

Net Optics iTap Triple-speed Fiber Port Aggregator


Licensing Options

Indigo Virtual - 25, 50, 100, 250, 500 managed nodes

Indigo Manager Pro - 50, 100, 250, 1,000 managed devices


Warranty

All products include a 1 year manufacturer´s warranty. A service plan with up to 7 years coverage and an advanced replacement option is available.

At a Glance
  • Device management and configuration
  • Rich graphical data visualization
  • At-a-glance dashboard views
  • Subnet-organized network topology map
  • View snapshot and historical data
  • Audit trail
  • Fault and event management
  • Third-party device management
  • Trap and email forwarding
  • Business logic alerts
  • Print and export to CSV files
  • Improves network visibility and security threat management
  • Monitors traffic levels and quality across the network
  • Centralized access to data from large numbers of devices
  • Compatible with Director, Director Pro, xBalancer, and iTap devices
  • Quick and simple deployment
New!
  • Entry-level virtual appliance support
  • Northbound traps allow sending of SNMP alarms to any device of choice
  • Improved Syslog integration and customized configuration for advanced environments
  • Automated Indigo Pro backup and restore capabilities
Coming Soon!
  • Supported devices backup and restore
  • Cloud-based updates for IP appliance and supported managed devices
  • Support for xStream devices
  • Easily manages several to hundreds of monitoring access devices



RICHIESTA DEL PREZZO





*:
3+6=
* CAMPI OBBLIGATORI
NOTE:
I tuoi dati saranno utilizzati solamente per ragioni interne e non saranno mai forniti a terze parti sotto nessuna circostanza.

+49 6102 7487-0   |       |    Disclaimer   |    Condizioni del contratto   |    Mappa del sito   |    Imprint
Last updated: 30.06.2016 - © 2016 by CROSS Industries AG
CERCA PRODOTTO:              CERCA