NP-Channel - Network Visibility & Test Solutions for Security, Network and Application Performance

SUCHE

Produkte > Aggregation Taps

Aggregation Taps bieten Zugriff auf Vollduplex-Verbindungen mit nur einer Netzwerkkarte bzw. Netzwerkschnittstelle. Aggregation Taps werden grundsätzlich in zwei Gruppen unterteilt - Port Aggregation Taps und Link Aggregation Taps:
  • Port Aggregator Topology
    Ein Port Aggregator gibt den Vollduplex Datenstrom einer einzelnen Netzwerkverbindung aggregiert an einem Monitoring Port aus. Somit ist es möglich den bi-direktionalen Netzwerk- verkehr bequem mit nur einer Netzwerkkschnittstelle zu analy- sieren. Zudem stehen an einem Port Agg zwei Monitoring Ports zur Verfügung, womit es möglich ist, den Netzwerkverkehr doppelt und mit zwei verschiedenen Analysegeräten zu überwachen.

  • Link Aggregatoren ermöglichen die Überwachung von mehreren Netzwerksegmenten an einem oder mehreren Monitoring Ports. Hierbei werden die Streams von den verschiedenen Netzwerkleitungen zu einem Datenstrom aggregiert. Ein großer Vorteil dieser Lösung ist zudem, dass das angeschlossene Monitoring System nur mit einer Netzwerkschnittstelle ausgestattet sein muss, um 24 Leitungen zeitgleich überwachen zu können. Des Weiteren eignet sich dieser TAP ideal für die Analyse von asymetrischem Datenverkehr und redundanten Strecken mit dynamischen Netzwerkprotokollen.

Get Adobe Flash player
Leverage monitoring tools for multi-protocol visibility


Ixia/Net Optics Link Aggregator Vergleichs-Matrix
 Click Here

Link und Port Aggregatoren

Filtern nach Topologie: Medientyp:
Hersteller:

Aggregation Taps - Produktfoto - 10/100/1000 Mbit Kupfer Netzwerk & Link Aggregation Tap
HOT
10/100/1000 Mbit Kupfer Netzwerk & Link Aggregation Tap

Zum Vergrößern bitte anklicken - Aggregation Taps - Produktfoto - 10/100/1000 Mbit Kupfer Netzwerk & Link Aggregation Tap
The CTP-1000 tap can be installed between any two network devices, such as firewalls, routers, or switches, and allow traffic to flow between these network points. The tap makes a copy of the data flowing through it, and provides the packet copy to network appliances or tools for application, security or recording purposes.

Visibility for Single or Dual Interface Monitoring Solutions

The CTP-1000 tap can be installed between any two network devices, such as firewalls, routers, or switches, and allow traffic to flow between these network points. The tap makes a copy of the data flowing through it, and provides the packet copy to network appliances or tools for application, security or recording purposes.

Aggregation Mode
The CTP-1000 can combine the two full duplex network streams of data together into a single monitoring output. Aggregation mode allows a tool with a single port to monitor full duplex communication on a network link. In Aggregation mode, the tap creates identical copies of the aggregate data on the network tapped network link. This mode allows 2 tools to see the same data. Primary and secondary tools are often used with Aggregation mode, since they both see the same network packets.

Non-Aggregation Mode
Non-aggregating mode allows the port to run at full line rate, without dropping traffic. This option is a popular choice when security or packet analyzers need to see every packet. Analyzers and probes connected to 1 Gigabit links can typically only receive a maximum of 1 Gigabit per port. In cases where you want to receive at line rates on a network link, use the CTP-1000 in non-aggregating mode, but remember you need to use 2 ports on your monitoring device to watch both sides of the network link.

Regeneration
In Aggregation mode, the tap generates 2 copies of identical network traffic to provide multiple tools monitoring access to the same link. In addition to eliminating contention for access to critical links, multiple tools can be connected to the same link for redundancy, testing, or advanced monitoring applications.

Reliable and Easy to Use
Unlike setting up operating systems and binding NICs, the CTP-1000 is simple to deploy, and every unit comes with dual redundant power supplies to ensure monitoring uptime. A convenient switch on the back of the device allows users to choose between Aggregation and Non-Aggregation modes. After setting the aggregation switch, the device is plug and play. There is no other configuration or setup necessary for this easy to use, reliable device.

Security
The CTP-1000 does not have MAC addresses so it is essentially invisible to the network. Use the CTP-1000 when you want to collect and capture packets for a security or storage application. The copy of traffic into the security or monitoring tool is one-way, so the CTP-1000 won't become a point of access for hackers, nor can anyone get to the security probe or recording device through the tap (since the traffic is one way).

savvius Insight - Network Performance Monitoring Appliance for smaller Networks


Savvius Insight is the newest and smallest addition to the Omnipliance family of network monitoring appliances. Savvius Insight has no moving parts, connects inline to the network with two bypass ports, and has three extra ports for span port captures.

With the advanced expert system and extensive array of other visual and interactive analysis features built into Savvius Insight, network professionals, IT consultants, and Splunk administrators are armed with the same caliber of tools for monitoring smaller networks that they are used to having for the datacenter with Omnipliances. And like the larger Omnipliances, Savvius Insight performs all capture and analysis locally, and does not require the packets be sent over the network. Savvius Insight also enhances Omnipliance deployments by providing more capture points to take advantage of the built-in Multi-Segment Analysis features of the Omnipliance.

Features:
  • Saves money by having an affordable network monitoring appliance at every location
  • Provides remote troubleshooting and reporting capabilities 24x7 without requiring travel
  • Reduces mean time to resolution (MTTR) by providing advanced troubleshooting capabilities at the edge
  • Increases ROI of Omnipliance deployments through use of OmniPeek and MSA
  • Provides long term reporting through Splunk integration and Savvius for Splunk Dashboards
Data Sheet PDF-File DOWNLOAD Data Sheet

CTP-1000
 
10/100/1000 Kupfer Netzwerk & Link Aggregation Tap mit 2x 10/100/1000 Monitoring Ports

Zubehör
Network Performance Monitoring Appliance for smaller Networks
savvius Insight Network Performance Monitoring Appliance for smaller Networks  
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

PORTS:
- Network: One (1) 10/100/1000 Network Tap (RJ45)
- Monitoring: Two (2) 10/100/1000 Any-to-Any Ports (RJ45)

POWER REQUIREMENTS:
- Two (2) External AC Adapters (included)
- Input: 100-240 VAC, 50-60Hz, Max. 50mA at 120VAC

CERTIFICATIONS: CE, RoHS, CAN ICES-3 (A)/NMB-3(A), FCC Part 15 Class B

PHYSICAL DIMENSIONS (HxWxD): 1.07 x 5.00 x 5.00 in (2.7 x 12.72 x 12.7 cm)

WEIGHT: 12 oz. (0.34 kgs)

ENVIRONMENT:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C )
- Humidity: 5 to 90% non-condensing < 25 BTU/h

WARRANTY: One (1) Year Hardware Warranty

  • View entire full-duplex conversations using single-interface monitoring tools
  • Decrease reliance on switch resources for network management visibility. Eliminate SPAN port contention, oversubscription, and configuration errors
  • Deploy tools immediately without impacting your production network
  • Easily share tap ports for improved monitoring without maintenance windows 
  • Single point of deployment and remote management minimizes management expenses and MTTR
  • Easy to deploy- switch selects Aggregation/Non-aggregation mode

Aggregation Taps - Produktfoto - SINGLEstream™ 10/100/1000 Link Aggregation Tap
SINGLEstream™ 10/100/1000 Link Aggregation Tap

Zum Vergrößern bitte anklicken - Aggregation Taps - Produktfoto - SINGLEstream™ 10/100/1000 Link Aggregation Tap
The SINGLEstream™ SS-1204BT Link Aggregation Tap is inserted inline (ports 1 and 2) and will collect traffic from a network link and allow you to combine it into a single output. With 2 monitoring ports (3 and 4), you can have 2 copies of that aggregate data, or when link utilization is high, keep the full duplex streams seperate. The SINGLEstream™ SS-2206BT-BT-S Link Aggregation Tap is inserted inline and can collect traffic from two network links and allow you to combine traffic into a single output. With 2 monitoring ports, you can have 2 copies of that aggregate data, or keep the full duplex streams seperate, when utilization is high. For additional flexibility, the monitor ports, 5 and 6 can also receive traffic from an external mirror port or another tap.

Aggregation
Monitoring network traffic from two different sources is an important and frequent requirement in network analysis, commonly referred to as data aggregation. For example, in order to properly troubleshoot mostnetwork problems, network professionals need to receive traffic from both sides of a full duplex conversation.

While traditional taps might enable full-duplex monitoring of all traffic on a network link, they transmit the data to the connected monitoring device in two separate half-duplex streams (one for Tx and one for Rx). Not only does this require the monitoring device to have two network interface cards, it also requires that the device be capable of combining and processing both streams of data in order to monitor both sides of the conversation. Not all monitoring systems, including the most popular software solutions, have the required hardware to aggregate traffic.

The SINGLEstream Link Aggregation Tap combines both directions of a full duplex data stream and allows any connected monitoring device, including those with only one NIC, to receive a copy of all the data - in a single trace file.

Dual Stream Mode
For dual-receive capable tools and times when there is no substitute for full line rate data capture (e.g. network attacks), the SINGLEstream can be configured to work exactly like a traditional full duplex tap, providing a copy of full-rate Gigabit data to connected tools in two separate streams (Tx and Rx).

LINKprotect™
Many traditional taps prevent the operation of redundant routing and failover systems because they keep both sides of the network invisible to the other. The built-in LINKprotect feature eliminates this point of network failure by continuously monitoring both sides of the tapped network for link status. If one side of the tap loses link status, LINKprotect™ will close the other side of the link, so routers and switches can engage protocols to bypass the failed link.

LINKprotect will also keep monitoring both sides of the link until repaired, where it can then automatically re-establish the primary link. Timers (polling and recovery) and link reestablishment settings (manual or auto) are all user-configurable on both sides of the link and provide a level of convenience and flexibility not previously available in copper Gigabit taps.

Regeneration
One-to-Many configurations replicate copies of identical network traffic to provide multiple tools monitoring access to the same links. In addition to eliminating contention for access to critical links, multiple tools can be connected to the same link for redundancy, testing, or advanced monitoring applications.

Reliable and Easy to Use
Unlike setting up operating systems and binding NICs, the SINGLEstream Link Aggregation Tap is simple to deploy, and every unit comes with dual redundant power supplies to
ensure monitoring uptime


SS-1204BT-BT-S
 
10/100/1000 Link Aggregation Tap with 2 Copper Monitoring Ports

SS-1204BT-SFP-S
 
10/100/1000 Link Aggregation Tap with 2 SFP Monitoring Ports

SS-2206BT-BT-S
 
2x 10/100/1000 Dual Link Aggregation Tap with 2 Copper Monitoring Ports

Zubehör
RMC-2 2-TAP 1U Rack Mount Chassis  
RMC-12-2 12-TAP 6U Rack Mount Chassis  
RPS-12-5-AC 12-TAP Dual Redundant Rack Mountable AC Power Supply Unit  
RPS-12-5-DC 12-TAP Dual Redundant Rack Mountable DC Power Supply Unit  
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

PORTS:
- Network:
-- SS-1204BT: One (1) 10/100/1000 Network Tap (RJ45)
-- SS-2206BT-BT-S: Two (2) 10/100/1000 Network Taps (RJ45)

- Monitoring:
-- SS-1204BT-BT-S: Two (2) 10/100/1000 Any-to-Any Ports (RJ45)
-- SS-1204BT-SFP-S: Two (2) 10/100/1000 Any-to-Any Ports (SFP)
-- SS-2206BT-BT-S: Two (2) 10/100/1000 Any-to-Any Ports (RJ45)

- Management (front): RJ45 @ 100 Mbps Full-Duplex
- Serial (rear): DB9F

POWER REQUIREMENTS:
- Two (2) External AC Adapters (included)
- Input: 100-240 VAC, 50-60Hz, 0.8A

CERTIFICATIONS: CE, RoHS

PHYSICAL DIMENSIONS (HxWxD): 1.10 x 8.00 x 7.00 in (2,8 x 20,3 x 17,8 cm)

WEIGHT: 1.6 lbs (0.7 kgs)

ENVIRONMENT:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C )
- Humidity: 5 to 90% non-condensing

WARRANTY: One (1) Year Hardware Warranty

  • View entire full-duplex conversations using single interface monitoring tools
  • Save money by reducing the number of required tools or tool interfaces necessary to monitor all your data
  • Decrease reliance on switch resources for network management visibility
  • Eliminate SPAN port contention, oversubscription, and configuration errors
  • Deploy tools immediately without impacting your productionnetwork
  • Easily share tap ports for improved monitoring without maintenance windows
  • Single point of deployment and remote management minimizes management expenses and MTTR
  • One tool can monitor two network links
  • SS-1204BT-SFP-S: SFP ports allow media flexibility for monitoring or SPAN input
SS-1204BT-BT-S
Data Sheet PDF-Datei Data Sheet
SS-1204BT-BT-S
Application Guide JPG - Datei Deployment
SS-1204BT-BT-S
Installation Guide PDF-Datei Install Guide
SS-1204BT-SFP-S
Data Sheet PDF-Datei Data Sheet
SS-2206BT-BT-S
Application Guide JPG - Datei Deployment
SS-2206BT-BT-S
Installation Guide PDF-Datei Install Guide
SS-2206BT-BT-S
Data Sheet PDF-Datei Data Sheet

Aggregation Taps - Produktfoto - SINGLEstream™ 10/100/1000 oder 1G Link Aggregation Tap
SINGLEstream™ 10/100/1000 oder 1G Link Aggregation Tap

Zum Vergrößern bitte anklicken - Aggregation Taps - Produktfoto - SINGLEstream™ 10/100/1000 oder 1G Link Aggregation Tap

Provide Multiple Tool Access and Achieve Full-Duplex Visibility for Two (2) resp. Four (4) In-Line Network Links Even with Single Interface solutions

Aggregation
Monitoring full duplex network traffic from multiple sources is often a critical requirement for network monitoring applications. For example, in order to properly monitor redundant networks or a pair of load balanced links, network professionals might need to receive traffic simultaneously from two different network segments.

In some cases, two network links may be bound together and operate as one logical network in order to improve bandwidth. In such an implementation, packets are distributed across two different physical links. Often, traffic transmits on one segment and receives on another. This makes network analysis and monitoring especially challenging. If an analyzer or monitoring device is put on only one physical link, it will not see the entire conversation.

The SINGLEstream Dual Link Aggregation Tap can selectively combine a full duplex data stream to allow connected monitoring devices, even those with only one NIC to receive a copy of all the data collected from both taps in a single trace file.

LINKprotect™
Many traditional taps prevent the operation of redundant routing and failover systems because they keep both sides of the network invisible to the other. The built-in LINKprotect™ feature eliminates this point of network failure by continuously monitoring both sides of the tapped network for link status. If one side of the tap loses link status, LINKprotect™ will close the other side of the link, so routers and switches can engage protocols to bypass the failed link.

LINKprotect™ will also keep monitoring both sides of the link until repaired, where it can then automatically re-establish the primary link. Timers (polling and recovery) and link re-establishment settings (manual or auto) are all user-configurable on both sides of the link and provide a level of convenience and flexibility not previously available in copper Gigabit taps.

Regeneration
One-to-Many configurations replicate copies of identical network traffic to provide multiple tools monitoring access to the same links. In addition to eliminating contention for access to critical links, multiple tools can be connected to the same link for redundancy, testing, or advanced monitoring applications.

Reliable and Easy to Use
Unlike setting up operating systems and binding NICs, the SINGLEstream™ Link Aggregation Tap is simple to deploy, and every unit comes with dual redundant power supplies to ensure monitoring uptime.


SS-2210BT-BT/SFP-S
 
Dual Link Aggregation Tap with 6 SFP or Copper Monitoring Ports

SS-4210BT-SFP-S
 
Quad Link Aggregation Tap with 2 SFP Monitoring Ports

Zubehör
SFP-RJ45 10/100/1000BT Copper Transceiver  
SFP-LX 1G Singlemode Fiber Transceiver (9µ)  
SFP-SX 1G Multimode Fiber Transceiver (50 or 62.5µ)  
RMC-2 2-TAP 1U Rack Mount Chassis  
RMC-12-2 12-TAP 6U Rack Mount Chassis  
RPS-12-5-AC 12-TAP Dual Redundant Rack Mountable AC Power Supply Unit  
RPS-12-5-DC 12-TAP Dual Redundant Rack Mountable DC Power Supply Unit  
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

PORTS:

- Network:
-- SS-2210BT-BT/SFP-S: Two (2) 10/100/1000 Network Taps (RJ45)
-- SS-4210BT-SFP-S: Four (4) 10/100/1000 Network Taps (RJ45)

- Monitoring:
-- SS-2210BT-BT/SFP-S: Four (4) RJ45 and Two (2) SFP Any-to-Any Ports
-- SS-4210BT-SFP-S: Two (2) SFP Any to Any Ports

- Management: RJ45 @ 100Mbs Full-Duplex
- Serial (rear): DB9F

POWER REQUIREMENTS:
- Two (2) External AC Adapters (included)
- Input: 100-240 VAC, 50-60Hz, 0.8A

CERTIFICATIONS: CE, RoHS

PHYSICAL DIMENSIONS (HxWxD): 1.10 x 8.00 x 7.00 in (2.79 x 20.32 x 17.78 cm)

WEIGHT: 1.6 lbs (0.7 kgs)

ENVIRONMENT:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C )
- Humidity: 5 to 90% non-condensing

WARRANTY: One (1) Year Hardware Warranty

  • View entire full-duplex conversations even across redundant links using single-interface monitoring tools
  • Save money by reducing the number of required tools or tool interfaces necessary to monitor all your data
  • Decreased reliance on switch resources for network management visibility
  • Eliminate SPAN port contention, oversubscription, and configuration errors
  • Deploy tools immediately without impacting your production network
  • Easily share tap ports for improved monitoring without maintenance windows
  • Single point of deployment and remote management minimizes management expenses and reduces MTTR
  • One tool can monitor two network links
SS-2210BT-BT/SFP-S
Data Sheet PDF-Datei Data Sheet
SS-2210BT-BT/SFP-S
Application Guide JPG - Datei Deployment
SS-4210BT-SFP-S
Installation Guide PDF-Datei Install Guide
SS-4210BT-SFP-S
Data Sheet PDF-Datei Data Sheet
SS-4210BT-SFP-S
Application Guide JPG - Datei Deployment

Aggregation Taps - Produktfoto - SINGLEstream™ 1G Fiber Link Aggregation Tap
SINGLEstream™ 1G Fiber Link Aggregation Tap

Zum Vergrößern bitte anklicken - Aggregation Taps - Produktfoto - SINGLEstream™ 1G Fiber Link Aggregation Tap
  • View entire full-duplex conversations using single-interface monitoring tools
  • Decrease reliance on switch resources for network management visibility
  • Eliminate SPAN port contention, oversubscription, and configuration errors
  • Deploy tools immediately without impacting your production network
  • Easily share Test Access Points without maintenance windows or approval
  • Single point of deployment and remote management minimizes management expenses and MTTR
  • Keep your monitoring tool plugged in while troubleshooting the same link

Full Duplex Visibility for Single Interface Monitoring Solutions

Aggregation
Monitoring network traffic from two different sources is an important and frequent requirement in network analysis, commonly referred to as data aggregation. For example, in order to properly troubleshoot most network problems, network professionals need to receive traffic from both sides of a full duplex conversation.

While traditional taps might enable full-duplex monitoring of all traffic on a network link, they transmit the data to the connected monitoring device in two separate half-duplex streams (one for Tx and one for Rx). Not only does this require the monitoring device to have two network interface cards, it also requires that the device be capable of combining and processing both streams of data in order to monitor both sides of the conversation. Not all monitoring systems, including the most popular software solutions, have the required hardware to aggregate traffic.

The SINGLEstream Link Aggregation Tap combines both directions of a full duplex data stream and allows any connected monitoring device, including those with only one NIC, to receive a copy of all the data - in a single trace file.

Dual Stream Mode
For dual-receive capable tools and times when there is no substitute for full line rate data capture (e.g. network attacks), the SINGLEstream can be configured to work exactly like a traditional full duplex tap, providing a copy of full-rate Gigabit data to connected tools in two separate streams (Tx and Rx).

Regeneration
One-to-Many configurations replicate copies of identical network traffic to provide multiple tools monitoring access to the same links. In addition to eliminating contention for access to critical links, multiple tools can be connected to the same link for redundancy, testing, or advanced monitoring applications.

Reliable and Easy to Use
Unlike setting up operating systems and binding NICs, the SINGLEstream Link Aggregation Tap is simple to deploy, and every unit comes with dual redundant power supplies to ensure monitoring uptime


SS-1204LX-BT-S
 
Link Aggregation TAP (1 - 1000LX [9 micron] TAP, 2 - 10/100/1000 Any-to-Any Ports) w/ SSH, SNMP

SS-1204LX-SFP-S
 
Link Aggregation TAP (1 - 1000LX [9 micron] TAP, 2 - SFP Any-to-Any Ports) w/ SSH, SNMP

SS-1204SX-BT-S
 
Link Aggregation TAP (1 - 1000SX [specify 50 or 62.5 micron] TAP, 2 - 10/100/1000 Any-to-Any Ports) w/ SSH, SNMP

SS-1204SX-SFP-S
 
Link Aggregation TAP (1 - 1000SX [50 micron] TAP, 2 - SFP Any-to-Any Ports) w/ SSH, SNMP

SS-1210LX-BT-S
 
Link Aggregation TAP (1 - 1000LX [specify 9 micron] TAP, 8 - SFP Any-to-Any Ports) w/ SSH, SNMP

SS-1210SX-BT-S
 
Link Aggregation TAP (1 - 1000SX [specify 50 or 62.5 micron] TAP, 8 - SFP Any-to-Any Ports) w/ SSH, SNMP

Zubehör
RMC-2 2-TAP 1U Rack Mount Chassis  
RPS-12-5-AC 12-TAP Dual Redundant Rack Mountable AC Power Supply Unit  
RPS-12-5-DC 12-TAP Dual Redundant Rack Mountable DC Power Supply Unit  
RMC-12-2 12-TAP 6U Rack Mount Chassis  
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

PORTS:

- Network:
-- SS-1204LX-BT-S: One (1) 1000 Network Tap (LC) (9 micron)
-- SS-1204LX-SFP-S: One (1) 1000 Network Tap (LC) (9 micron)
-- SS-1204SX-BT-S: One (1) 1000 Network Tap (LC) (specify 50 or 62.5 micron)
-- SS-1204SX-SFP-S: One (1) 1000 Network Tap (LC) (50 micron)
-- SS-1210LX-BT-S: One (1) 1000 Network Tap (LC) (9 micron)
-- SS-1210SX-BT-S: One (1) 1000 Network Tap (LC) (specify 50 or 62.5 micron)

- Monitoring:
-- SS-1204LX-BT-S: Two (2) 10/100/1000 Any-to-Any Ports (RJ45)
-- SS-1204LX-SFP-S: Two (2) 1G Any-to-Any Ports (SFP)
-- SS-1204SX-BT-S: Two (2) 10/100/1000 Any-to-Any Ports (RJ45)
-- SS-1204SX-SFP-S: Two (2) 1G Any-to-Any Ports (SFP)
-- SS-1210LX-BT-S: Eight (8) 1G Any-to-Any Ports (SFP)
-- SS-1210SX-BT-S: Eight (8) 1G Any-to-Any Ports (SFP)

- Management (front): RJ45 @ 100 Mbps Full-Duplex
- Serial (rear): DB9F

SPLIT RATIO:
- 50/50, 70/30, 80/20
- Additional Split Ratios Available

INSERTION LOSS*:
- Multimode (choose 50/62.5 micron diameter) 50/50 = 4.2 dB
- Multimode (choose 50/62.5 micron diameter) 70/30 = 3.0 / 6.7 dB
- Singlemode (9 micron diameter) 50/50 = 3.9 dB
- Singlemode (9 micron diameter) 70/30 = 2.2 / 6.3 dB
* typical per fiber

POWER REQUIREMENTS:
- Two (2) External AC Adapters (included)
- Input: 100-240 VAC, 50-60Hz, 0.8A

CERTIFICATIONS: CE, RoHS

PHYSICAL DIMENSIONS (HxWxD): 1.10 x 8.00 x 7.00 in (2,8 x 20,3 x 17,8 cm)

WEIGHT: 1.6 lbs (0.7 kgs)

ENVIRONMENT:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C )
- Humidity: 5 to 90% non-condensing

WARRANTY: One (1) Year Hardware Warranty

  • View entire full-duplex conversations using single interface monitoring tools
  • Fiber tap ports provide passive permanent access to traffic
  • Monitor fiber links with copper media monitoring tools
  • Decrease reliance on switch resources for network management visibility
  • Eliminate SPAN port contention, oversubscription, and configuration errors
  • Deploy tools immediately without impacting your production network
  • Easily share tap ports for improved monitoring without maintenance windows
  • Single point of deployment and remote management minimizes management expenses and MTTR
SS-1204SX-BT-S
Data Sheet PDF-Datei Data Sheet
SS-1204SX-BT-S
Application Guide JPG - Datei Deployment
SS-1204SX-SFP-S
Data Sheet PDF-Datei Data Sheet
SS-1204SX-SFP-S
Application Guide JPG - Datei Deployment

Aggregation Taps - Produktfoto - SINGLEstream™ 10G Fiber Link Aggregation Tap
SINGLEstream™ 10G Fiber Link Aggregation Tap

Zum Vergrößern bitte anklicken - Aggregation Taps - Produktfoto - SINGLEstream™ 10G Fiber Link Aggregation Tap
The SS-2212-10G is passivley inserted inline and can collect traffic from ten network links and direct two links full duplex traffic toward two outputs. Non-powered, built in fiber taps mean that traffic is safely collected with less that 10ns of latency added to the network. With 2 monitoring ports, you can have 2 copies of full duplex, line rate data streams. The SS-2212-10G is best used where a large number of 10G links need to be troubleshot quickly with one or two analytic devices.

Reliable Visibility from Ten (10) 10G Links to 2 Monitoring Devices. Direct Each Tool to Any Tapped Link

10 Gigabit Access
The SS-2212-10G In-Line fiber network tap allows you to directa copy of traffic from any of the ten tapped network links and send the copy to one or both monitoring tools. Passive and non-intrusive visibility is available for two 10G monitoring tools.

Totally Passive and Power Fault Tolerant
Integrated fiber taps are completely passive devices and are not a point of failure on the network. Even if power is lost to the tap, the network traffic will not be affected. If one side of the link fails for any reason, the device on the other side of the link will recognize this outage immediately, so routers and switches can engage redundant protocols and failover systems.

Zero Latency
Fiber taps allow traffic to flow between network devices through an optical to optical interface, which resolves any latency concerns between network devices.

Regeneration
One-to-Many configurations replicate copies of identical network traffic to provide multiple tools monitoring access to the same links. In addition to eliminating contention for access to critical links, multiple tools can be connected to the same link for redundancy, testing, or advanced monitoring applications.

Interconnect up to 8 devices
Provide analyzer access for up to 80 10G links by interconnecting up to 8 SS-2212-10G devices. When interconnected, they present a single logical unit where one tool can be easily directed to receive a copy of traffic from any of up to 80 network links. A second tool can receive traffic from the same link or any of the other 80 links that are tapped.

Graphic Display and Command Line Interface
The front panel graphic display allows users to determine where the copy of network link traffic is sent. Since the SINGLEstream™ can be interconnected, up to 8 deep, the address of each device, is available on the front panel. Power levels (in dB) on each link are available to determine if other network changes have occurred such as bad patch cords.

Reliable and Easy to Use
The SINGLEstream™ Network Tap is simple to deploy, and every unit comes with dual redundant hot-swappable power supplies to ensure monitoring uptime.


SS-2212-10G
 
SINGLEstream 10G Link Network Tap (10 Taps, 2 Non-Aggregated Monitoring Ports, Common Ports SR or LR

SS-2222-10G
 
SINGLEstream 10G Link Network Tap (10 Taps, 2 Non-Aggregated Monitoring Ports, 10 Dedicated Monitoring Ports, Common Ports SR

Zubehör
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

SS-2212-10G


ANY TO ANY PORTS:
- Network: Ten (10) SR or LR Network Taps with Dual LC connectors
- Monitoring: Two (2) SR or LR Monitoring Ports
- Management Port: RJ45
- Console Port: DB9

SPLIT RATIO:
- 50/50, 70/30, 80/20
- Additional Split Ratios Available

INSERTION LOSS*:
- Multimode (choose 50/62.5 micron diameter) 50/50 = 4.2 dB
- Multimode (choose 50/62.5 micron diameter) 70/30 = 3.0 / 6.7 dB
- Singlemode (9 micron diameter) 50/50 = 3.9 dB
- Singlemode (9 micron diameter) 70/30 = 2.2 / 6.3 dB
* typical per fiber

POWER REQUIREMENTS:
- Dual Redundant Hot Swappable Power Supplies (Included)
- Maximum Power Consumption: Less than 200 Watts
- Individual Power Supply Rating: 100-240V ~47-63Hz 4A MAX.

CERTIFICATIONS: CE, RoHS

DIMENSIONS (HxWxD): 1.72 x 19.00 x 26.5 in (4.37 x 48.26 x 67.31 cm)

WEIGHT: 18.15 lbs (8.23 kgs)

ENVIRONMENTAL:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C)
- Humidity: 5 to 90% non-condensing

WARRANTY: One (1) Year Hardware Warranty


SS-2222-10G

Following soon ...

  • Access up to 80 10G links with 2 analytic tools
  • 100% uptime, fiber taps are built into the device so there is no potential loss of traffic on the network
  • Eliminate SPAN port contention, oversubscription and configuration errors
  • Tapped ports can be directed to any monitor port
  • Up to 8 devices can be stacked to look like a single logical unit
SS-2212-10G
Data Sheet PDF-Datei Data Sheet
SS-2212-10G
Application Guide JPG - Datei Deployment


PREISANFRAGE





*:
3+6=
* PFLICHTFELDER
HINWEIS:
Ihre Daten werden nur für interne Zwecke oder zwecks Weiterleitung an den für Sie zuständigen Reseller genutzt und unter keinen Umständen an Dritte weitergegeben.
+49 6102 7487-0   |       |    Haftungsausschluss   |    AGB   |    Sitemap   |    Impressum
© 2016 by CROSS Industries AG
PRODUKTSUCHE:              SUCHE