NP-Channel - Network Visibility & Test Solutions for Security, Network and Application Performance

SEARCH

Products - Search


 - Product Photo - 1G Bypass Switch DURA<i>stream</i>™ 4000
1G Bypass Switch DURAstream™ 4000

Click to enlarge -  - Product Photo - 1G Bypass Switch DURA<i>stream</i>™ 4000
Ensure 100% Network Uptime when Deploying In-Line Monitoring Solutions and Intrusion Protection Systems. The DURAstream™ 4000 1G Bypass Switch is an easy-to-manage external active bypass providing failover and TAP capabilities for data monitoring of critical Gigabit network segments. Each bypass switch offers up to four independent interface modules with a variety of media options (copper, fiber, and media conversion). Each of the four network modules operates independently to ensure link protec

Automatic Failover = Constant Link State
Deploying in-line monitoring devices such as intrusion prevention systems (IPS) or bridge devices like VPN gateways and firewalls used to mean a potential point of failure on the network. When one of these devices malfunctioned or became overwhelmed with traffic, network outages could occur. This posed serious challenges when deployed on mission critical links.

The DURAstream™ Bypass Switch ensures your network’s most important data does not fail even when in-line devices do. Deploying a DURAstream™ Bypass Switch ensures uptime of critical links regardless of in-line device performance by diverting critical network traffic away from malfunctioning in-line devices until such devices are operating normally. This not only alleviates potential issues with traffic congestion affecting link behavior caused by an IPS, it allows maintenance and upgrades of attached in-line tools without network downtime.

The DURAstream™ 4000 1G Bypass Switch is an easy-to-manage external active bypass providing failover and TAP capabilities for data monitoring of critical Gigabit network segments. Each bypass switch offers up to four independent interface modules with a variety of media options (copper, fiber, and media conversion). Each of the four network modules operates independently to ensure link protection monitoring of one to four links at any time.

Line-rate throughput and real-time data forwarding hardware protects data and allows critical voice and data applications to perform uninterrupted and meet high demands for quality and security. Deployed with an in-line monitoring tool, a DURAstream™ bypass Switch creates a comprehensive solution for intrusion prevention.

Heartbeat Mode
The DURAstream™ 4000 1G Bypass Switch can monitor the health of in-line appliances by sending and receiving a heartbeat packet. A user programmable heartbeat packet can be injected into the monitoring port link to determine availability of attached monitoring devices or help determine delay due to high traffic volume.

Even if a connected in-line tool is powered on, the bypass switch can automatically switch traffic around it until the device returns to normal operation. At that time, traffic is re-routed back to the monitor port.

Passive Mode
In the event of power loss, the switch closes to create a physical connection, which in turn, creates a passive bypass path to help prevent traffic interruption.

Robust Management, Security and Logging
Manage your switch using built-in CLI or GUI, including secure web interface over HTTPS. Supports secure shell (SSH), SNMP, e-mail notifications, TACACS+ as well as Syslog to enable consolidation of log data from multiple systems into a central repository.

Reliable and Easy to Use
The DURAstream™ 4000 1G Bypass Switch is simple to deploy, enables plug-and-play connectivity, and is compatible with all major manufacturer’s monitoring systems. Every unit not only comes with dual redundant power supplies to ensure monitoring uptime, the voltage of each power supply is continuously monitored for instances of power decline or outage. In such cases, the unit can initiate a switch to passive bypass mode.


DS-4000-4BT
 
1G Bypass Switch (4-10/100/1000 Network Segments)

DS-4000-4SX*
 
1G Bypass Switch (4-Multi-mode (SX) Network Segments)

DS-4000-4LX
 
1G Bypass Switch (4-Single-mode (LX) Network Segments)

DS-4000-2BT/2SX*
 
1G Bypass Switch (2-10/100/1000 and 2-Multi-mode (SX) Network Segments)

DS-4000-2BT/2LX
 
1G Bypass Switch (2-10/100/1000 and 2-Single-mode (LX) Network Segments)

DS-4000-2LX/2SX*
 
1G Bypass Switch (2-Single-mode (LX) and 2-Multi-mode (SX) Network Segments)

DS-4000-2BT/LX/SX*
 
1G Bypass Switch (2-10/100/1000, 1-Single-mode (LX) and 1-Multi-mode (SX) Network Segments)

DS-4000-4SX-BT*
 
1G Bypass Switch w/ SX to BT Media Conversion (4-Multi-mode (SX) In-Line Links to 10/100/1000 Tools)

DS-4000-4LX-BT
 
1G Bypass Switch w/ LX to BT Media Conversion (4-Single-mode (LX) In-Line Links to 10/100/1000 Tools)

PORTS
- Network: Four(4) Network Segments Tapped
- Management: RJ45
- Serial: RJ45
- Tap: RJ45

POWER REQUIREMENTS
- Dual Redundant External Power Supplies (Included).
- Maximum Power Consumption: Less than 47 Watts
- Input: 100-240VAC, 50-60Hz, 1.4A Max

CERTIFICATIONS: CE, RoHS

DIMENSIONS (HxWxD): 1.75 x 16.75 x 12in (4.45 x 42.55 x 27.94 cm)

WEIGHT: 13.5lbs. (6.12 kgs)

ENVIRONMENTAL
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C)
- Humidity: 5 to 90% non-condensing

WARRANTY: One (1) Year Hardware Warranty included, Advanced Replacement-Next Day, 3rd Business Day options available

  • Optimized reliability of critical network links
  • Achieve fail-safe monitoring with in-line monitoring tools such as IPS and DPI
  • Improved network uptime and security
  • Protects against abnormal traffic patterns
  • Increased application availability
  • Upgrade, maintain, or replace in-line devices without interrupting network operations

 - Product Photo - 10G Bypass Switch DURA<i>stream</i> 1010
10G Bypass Switch DURAstream 1010

Click to enlarge -  - Product Photo - 10G Bypass Switch DURA<i>stream</i> 1010
Ensure 100% Network Uptime when Deploying In-Line Monitoring Solutions and Intrusion Protection Systems. The DURAstream™ 1010 Bypass Switch is an easy-to-manage external active bypass providing failover and TAP capabilities for data monitoring of critical 10 Gigabit network segments. Line rate throughput and real-time data forwarding hardware protects data and allows critical voice and data applications to perform uninterrupted and meet high demands for quality and security. Deployed with an in

Automatic Failover = Constant Link State
Deploying in-line monitoring devices such as intrusion prevention systems (IPS) or bridge devices like VPN gateways and firewalls used to mean a potential point of failure on the network. When one of these devices malfunctioned or became overwhelmed with traffic, network outages could occur. This posed serious challenges when deployed on mission critical links.

The DURAstream™ Bypass Switch ensures your network's most important data does not fail even when in-line devices do. Deploying a DURAstream™ Bypass Switch ensures uptime of critical links regardless of in-line device performance by diverting critical network traffic away from malfunctioning in-line devices until such devices are operating normally. This not only alleviates potential issues with traffic congestion affecting link behavior caused by an IPS, it allows maintenance and upgrades of attached in-line tools without network downtime.

The DURAstream™ 1010 Bypass Switch is an easy-to-manage external active bypass providing failover and TAP capabilities for data monitoring of critical 10 Gigabit network segments. Linerate throughput and real-time data forwarding hardware protects data and allows critical voice and data applications to perform uninterrupted and meet high demands for quality and security. Deployed with an in-line monitoring tool, a DURAstream™ Bypass Switch creates a comprehensive solution for intrusion prevention.

Heartbeat Mode
The DURAstream™ 1010 10G Bypass Switch can monitor the health of in-line appliances by sending and receiving a heartbeat packet. A user programmable heartbeat packet can be injected into the monitoring port link to determine availability of attached monitoring devices or help determine delay due to high traffic volume.

Even if a connected in-line tool is powered on, the bypass switch can automatically switch traffic around it until the device returns to normal operation. At that time, traffic is re-routed back to the monitor port.

Passive Mode
In the event of power loss, the switch closes to create a physical connection, which in turn, creates a passive bypass path to help prevent traffic interruption.

Robust Management, Security and Logging
Manage your switch using built-in CLI or GUI, including secure web interface over HTTPS. Supports secure shell (SSH), SNMP, e-mail notifications, TACACS+ as well as Syslog to enable consolidation of log data from multiple systems into a central repository

Reliable and Easy to Use
The DURAstream™ 1010 Bypass Switch is simple to deploy, enables plug-and-play connectivity, and is compatible with all major manufacturer's monitoring systems. Every unit not only comes with dual redundant power supplies to ensure monitoring uptime, the voltage of each power supply is continuously monitored for instances of power decline or outage. In such cases, the unit can initiate a switch to passive bypass mode.


DS-1010-SR*
 
10G Bypass Switch (1-10G Multi-mode (SR) Network Segment)

DS-1010-LR
 
10G Bypass Switch (1-10G Multi-mode (LR) Network Segment)

PORTS

- Network: One (1) SR or LR Network Segments Tapped
- Management: RJ45
- Serial: RJ45
- Tap: RJ45

POWER REQUIREMENTS

- Dual Redundant External Power Supplies (Included).
- Maximum Power Consumption: Less than 47 Watts
- Input: 100-240VAC, 50-60Hz, 1.4A Max

CERTIFICATIONS: CE, RoHS

DIMENSIONS (HxWxD): 1.75 x 16.75 x 12in (4.45 x 42.55 x 27.94 cm)

WEIGHT: 13.5lbs. (6.12 kgs)

ENVIRONMENTAL
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C)
- Humidity: 5 to 90% non-condensing

WARRANTY: One (1) Year Hardware Warranty included, Advanced Replacement-Next Day, 3rd Business Day options available

  • Optimized reliability of critical network links
  • Achieve fail-safe monitoring with in-line monitoring tools such as IPS and DPI
  • Improved network uptime and security
  • Protects against abnormal traffic patterns
  • Increased application availability
  • Upgrade, maintain, or replace in-line devices without interrupting network operations

 - Product Photo - Versastream 1G Copper/SFP Network Packet Broker /w Filtering & LB
Versastream 1G Copper/SFP Network Packet Broker /w Filtering & LB

Click to enlarge -  - Product Photo - Versastream 1G Copper/SFP Network Packet Broker /w Filtering & LB
Flexible, Any-to-Any Line-Rate Hardware Based Load Balancing and Packet Filtering for Cost Effective Data Capture and Monitoring Applications. 12-24 Ports Any-to-Any Switch with Load Balancing. Flexible, Any-to-Any Line-Rate Hardware Based Load Balancing and Packet Filtering for Cost Effective Data Capture and Monitoring Applications

Data Capture Infrastructure Optimizes Network Monitoring and Increases Efficiency
Networks are growing more complex, carrying more services, higher volumes of multi-protocol network traffic, and requiring greater bandwidth. At the same time, network and security personnel are required to monitor and analyze more links in greater detail throughout the network in order to meet application performance demands, minimize security threats, and meet regulatory compliance. Datacom Systems helps solve many of today's most pressing tool deployment problems by allowing organizations to conveniently connect 1G test and monitoring tools to any traffic on the network.

Load Balancing
Balance traffic across multiple ports to allow growth as the volume of data increases. Load balancing helps prevent loss of data by enabling deployment of redundant security tools that can back each other up, in the event of failure while their software updates. As link utilization increases, you need to be able to distribute traffic across more analysis tools. Load balancing allows you to extend the life of existing devices as your network traffic increases.

Data Filtering
Instead of tools attempting to keep up with aggregate traffic streams, the VERSAstream can apply packet filters to the data to increase tool efficiency and eliminate port oversubscription. Line-rate hardware filtering on each port allows you to customize and streamline the amount and type of data each connected monitoring tool receives. Because they are receiving only traffic of interest, tools run faster, data is more manageable, and issues are resolved quicker. Command line filtering uses Wireshark based syntax.

Aggregation (Many-to-Any)
Many-to-Any monitoring access aggregates network traffic and provides visibility for one or more monitoring tools. Aggregate and reassemble full duplex conversations from one or more trunked links. Perfect for tools that don't support multiple monitoring interfaces or for redundant networks, EtherChannel, load balanced servers, and asymmetrically routed traffic.

Regeneration (Any-to-Many)
Any-to-Many configurations replicate copies of identical network traffic to provide multiple tools with monitoring access to the same links. In addition to eliminating contention for scarce SPAN ports and test access points, multiple tools can be connected to the same link for redundancy, testing, or advanced monitoring applications.

Port Steering (Any-to-Any)
Any of the ports can be configured as input (network) or output (monitoring) ports on the fly through an easy to use command line interface (CLI) or Web-based management.


VS-1012-F
 
12 Port Any-to-Any Switch with Filtering & Load Balancing

VS-1024-F
 
24 Port Any-to-Any Switch with Filtering & Load Balancing

Accessories
VS-1012-F-1 VERSAstream™ 12 Port Data Access Switch SFPs Single Power Supply  
VS-1012-F VERSAstream™ 12 Port Data Access Switch SFPs Dual Power Supply  
SFP-RJ45 10/100/1000BT Copper Transceiver  
SFP-LX 1G Singlemode Fiber Transceiver (9µ)  
SFP-SX 1G Multimode Fiber Transceiver (50 or 62.5µ)  

ANY TO ANY PORTS
- Any-to-Any Ports: Twelve (12) (Supports SFP SX, LX, BT)
- Management Port: RJ45
- Console Port: DB9

POWER REQUIREMENTS
- Single or Dual Redundant Hot Swappable Power Supplies (Included)
- Maximum Power Consumption: Less than 200 Watts
- Individual Power Supply Rating: 100-240V ~47-63Hz 4A MAX.

CERTIFICATIONS: CE, RoHS

DIMENSIONS (HxWxD): 1.72 x 19.00 x 21.00 in (4.37 x 48.26 x 53.34 cm)

WEIGHT: 18.15 lbs (8.23 kgs)

ENVIRONMENTAL
- Operating Temperature: 32° to 131°F (0° to 55°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C)
- Humidity: 5 to 95% non-condensing

FILTERING
- IPv4 Address Sources and Destinations, Subnets
- MAC Address Sources and Destinations
- Ports
- Ethertype
- VLAN
- IPv6 Address Sources and Destinations, Subnets

WARRANTY: One (1) Year Hardware Warranty included, Advanced Replacement-Next Day, 3rd Business Day options available



  • Load Balancing - Balance sessions across multiple outputs for monitoring redundancy
  • 240 Gbps backplane
  • All ports active with full features no per port licensing. Input from passive TAPs or SPANs.
  • Filtering - Line-rate hardware-based filtering can eliminate port oversubscription.
  • Filter on IPv4 Src/Dst Address, MAC Address, Protocol, Port, Ethertypes i.e. MPLS, VLAN, IPv6 Src/Dst Address
  • Aggregation/Regeneration - Combine multiple network links or channels into one stream or send copies to multiple connected tools to share data sources
  • Media Conversion - Leverage existing monitoring tools regardless of media type
  • Manage device remotely or locally with Web-based management (HTTPs) or extensive CLI (telnet/SSH)
  • SNMP v2c, v3c
  • RADIUS, TACACS+
VS-1012-F
Data Sheet PDF-File Data Sheet
VS-1012-F
Application Guide PDF - File Deployment
VS-1024-F
Data Sheet PDF-File Data Sheet
VS-1024-F
Application Guide PDF - File Deployment

 - Product Photo - Versastream 1G/10G SFP+/SFP NPB /w Filtering & Load Balancing
Versastream 1G/10G SFP+/SFP NPB /w Filtering & Load Balancing

Click to enlarge -  - Product Photo - Versastream 1G/10G SFP+/SFP NPB /w Filtering & Load Balancing
12-24 Ports Any-to-Any Switch with Load Balancing. 8/16 1Gb ports and 4/8 10Gb ports. Flexible, Any-to-Any Line-Rate Hardware Based Load Balancing and Packet Filtering for Cost Effective Data Capture and Monitoring Applications.

Data Capture Infrastructure Optimizes Network Monitoring and Increases Efficiency
Networks are growing more complex, carrying more services, higher volumes of multi-protocol network traffic, and requiring greater bandwidth. At the same time, network and security personnel are required to monitor and analyze more links in greater detail throughout the network in order to meet application performance demands, minimize security threats, and meet regulatory compliance. Higher speed networks are being deployed, fueling the need for higher speed monitoring tools. Datacom Systems helps solve many of today's most pressing tool deployment problems by allowing organizations to conveniently connect 10G and 1G test and monitoring tools to any traffic on the network.

Load Balancing
Balance traffic across multiple ports to allow growth as the volume of data increases. Load balancing helps prevent loss of data by enabling deployment of redundant security tools that can back each other up, in the event of failure or during while their software updates. As links get faster, you need to be able to distribute traffic across lower speed analysis tools. Load balancing allows you to extend the life of existing lower speed devices as your network traffic increases.

Data Filtering
Instead of tools attempting to keep up with high-speed aggregates traffic streams, the VERSA stream can apply packet filters to the data to increase tool efficiency and eliminate port oversubscription. Line-rate hardware filtering on each port allows you to customize and streamline the amount and type of data each connected monitoring tool receives. Because they are receiving only traffic of interest, tools run faster, data is more manageable, and issues are resolved quicker. Command line filtering uses Wireshark based syntax.

Aggregation (Many-to-Any)
Many-to-Any monitoring access aggregates network traffic and provides visibility for one or more monitoring tools. Aggregate and reassemble full duplex conversations from one or more trunked links. Perfect for tools that don't support multiple monitoring interfaces or for redundant networks, EtherChannel, load balanced servers, and asymmetrically routed traffic.

Regeneration (Any-to-Many)
Any-to-Many configurations replicate copies of identical network traffic to provide multiple tools with monitoring access to the same links. In addition to eliminating contention for scarce SPAN ports and test access points, multiple tools can be connected to the same link for redundancy, testing, or advanced monitoring applications.

Port Steering (Any-to-Any)
Any of the ports can be configured as input (network) or output (monitoring) ports on the fly through an easy to use command line interface (CLI) or Web-based management.


VS-1112-F
 
12 Port Any-to-Any Switch with Filtering & Load Balancing

VS-1124-F
 
24 Port Any-to-Any Switch with Filtering & Load Balancing

Accessories
SFP+-LR/LX LR Singlemode 10G/1G Transceiver  
SFP+-SR/SX SR Multimode 10G/1G Transceiver  
SFP-RJ45 10/100/1000BT Copper Transceiver  
SFP-LX 1G Singlemode Fiber Transceiver (9µ)  
SFP-SX 1G Multimode Fiber Transceiver (50 or 62.5µ)  

ANY TO ANY PORTS:
- Eight (8) 1Gb ports and Four (4) 10Gb ports (Supports SFP+ SR, LR, LRM, SFP SX, LX, BT)
- Management Port: RJ45
- Console Port: DB9

POWER REQUIREMENTS:
- Dual Redundant Hot Swappable Power Supplies (Included)
- Maximum Power Consumption: Less than 200 Watts
- Individual Power Supply Rating: 100-240V ~47-63Hz 4A MAX.

CERTIFICATIONS: CE, RoHS

DIMENSIONS (HxWxD): 1.72 x 19.00 x 21.00 in (4.37 x 48.26 x 53.34 cm)

WEIGHT: 18.15 lbs (8.23 kgs)

ENVIRONMENTAL:
- Operating Temperature: 32° to 131°F (0° to 55°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C)
- Humidity: 5 to 95% non-condensing

FILTERING:
- IPv4 Address Sources and Destinations, Subnets
- MAC Address Sources and Destinations
- Ports
- Ethertype
- VLAN
- IPv6 Address Sources and Destinations, Subnets

WARRANTY: One (1) Year Hardware Warranty included, Advanced Replacement-Next Day, 3rd Business Day options available

  • Load Balancing - Balance sessions across multiple outputs for monitoring redundancy
  • 240 Gbps backplane
  • All ports active with full features- no per port licensing. Input from passive TAPs or SPANs.
  • Filtering - Line-rate hardware-based filtering can eliminate port oversubscription.
  • Filter on IPv4 Src/Dst Address, MAC Address, Protocol, Port, Ethertypes i.e. MPLS, VLAN, IPv6 Src/Dst Address
  • Aggregation/Regeneration - Combine multiple network links or channels into one stream or send copies to multiple connected tools to share data sources
  • Media Conversion - Leverage existing monitoring tools regardless of media type
  • Manage device remotely or locally with Web-based management (HTTPs) or extensive CLI (telnet/SSH)
  • SNMP v2c, v3c
  • RADIUS, TACACS+
VS-1112-F
Data Sheet PDF-File Data Sheet
VS-1112-F
Application Guide JPG - File Deployment
VS-1124-F
Data Sheet PDF-File Data Sheet
VS-1124-F
Application Guide JPG - File Deployment

 - Product Photo - Versastream 1G Copper/SFP Network Packet Broker
Versastream 1G Copper/SFP Network Packet Broker

Click to enlarge -  - Product Photo - Versastream 1G Copper/SFP Network Packet Broker
The Datacom Systems VERSAstream helps solve many of today's most pressing tool deployment problems by allowing companies to conveniently connect test and monitoring tools to any traffic on the network. Not only does this provide access capabilities to leverage network tools throughout the enterprise, it allows multiple departments with different needs to share tools and network access points with remote and centralized control.

Full Network Visibility for Monitoring Solutions

Aggregation
Monitoring network traffic from two different sources is an important and frequent requirement in network analysis, commonly referred to as data "aggregation". For example, in order to properly troubleshoot most network problems, network professionals need to receive traffic from both sides of a full duplex conversation.

Many network analysis or security tools are capable of monitoring traffic from many different points in the network at once. These tools however, only have a limited number of network interface cards and can only receive traffic from as many sources as they have ports.

Aggregation allows traffic to be combined from multiple sources including tap outputs, SPAN ports, or mirror ports. By combining the traffic originating from different sources into a single link, a single tool can be leveraged to provide security or analysis to a larger part of the network.

Regeneration
One-to-Many configurations replicate copies of identical network traffic to provide multiple tools monitoring access to the same links. In addition to eliminating contention for access to critical links, multiple tools can be connected to the same traffic streams for redundancy, testing, or advanced monitoring applications.

In addition to being able to replicate traffic to multiple tools, regeneration also provides the capability of sharing identical copies of traffic with multiple departments. This can eliminate SPAN port contention and allow each department access to a wider variety of data. With fully customizable regeneration, each department has the ability to access only the traffic flows that they need to see to do their job.

Port Steering (Any-to-Any)
Every port on the VERSAstream™ is capable of sending incoming traffic to any other port, and as a result, is capable of receiving traffic from any other port.

Since the port steering is left unrestricted, it is possible to set up the VERSAstream™ in a way that best compliments the data capturing architecture. These Any-to-Any ports can be dynamically configured through an easy to use command line interface (CLI).

Configurability
Using an easy to use command line interface (CLI), all port settings and management settings can be configured on the fly. As port speeds, network setup, and traffic requirements change the VERSAstream™ can with them.

Features like SNMP can be enabled and configured through the CLI for easier managment of the switch, While traffic related features like VLAN Tag Stripping can be enabled and configured through the CLI to customize it´s traffic flows.

Secure Access to Traffic
VERSAstream™ Data Access Switches are deployed out-of-band, and have no MAC or IP settings on the traffic ports. Because of this, the switch is invisible to the network and does not modify the traffic passing through it.


VS-1204BT-S
 
4-Port Copper Data Access Switch

VS-1208BT-S
 
8-Port Copper Data Access Switch

VS-1208BT/SFP-S
 
8-Port Copper / 2-Port SFP Data Access Switch

VS-1210-SFP-S
 
10-Port SFP Data Access Switch

Accessories
RMC-2 2-TAP 1U Rack Mount Chassis  
RPS-12-5-AC 12-TAP Dual Redundant Rack Mountable AC Power Supply Unit  
RPS-12-5-DC 12-TAP Dual Redundant Rack Mountable DC Power Supply Unit  
RMC-12-2 12-TAP 6U Rack Mount Chassis  

ANY TO ANY PORTS:
- Any-to-Any Ports: Four (4) 10/100/1000 Any-to-Any ports (RJ45)
- Management Port: RJ45
- Console Port: DB9

POWER REQUIREMENTS:
- Two (2) External AC Adapters (Included)
- Input: 100-240VAC, 50-60Hz, 0.8A

CERTIFICATIONS: CE, RoHS

DIMENSIONS (HxWxD): 1.10 x 8.00 x 7.00 in (2.79 x 20.32 x 17.78 cm)

WEIGHT: 1.6 lbs. (0.7 kgs)

ENVIRONMENTAL:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C)
- Humidity: 5 to 90% non-condensing

WARRANTY: One (1) Year Hardware Warranty included, Advanced Replacement-Next Day, 3rd Business Day options available

  • Port Steering Any-to-Any ports allow traffic aggregation and copies to multiple tools
  • Consolidate monitoring tools to reduce management expenses and lower tool costs
  • Single point of deployment and remote management minimizes management expenses and reduces MTTR
  • Deploy tools right away without impacting your production network
  • Keep all your tools plugged in while troubleshooting
  • Easily share scarce SPAN ports and test access points without maintenance windows or approval
  • Provide immediate networkaccess for new compliance monitors
VS-1204BT-S
Data Sheet PDF-File Data Sheet
VS-1204BT-S
Application Guide JPG - File Deployment
VS-1204BT-S
Installation Guide PDF-File Install Guide
VS-1208BT-S
Data Sheet PDF-File Data Sheet
VS-1208BT-S
Application Guide JPG - File Deployment
VS-1208BT-S
Installation Guide PDF-File Install Guide
VS-1210-SFP-S
Data Sheet PDF-File Data Sheet
VS-1210-SFP-S
Application Guide JPG - File Deployment
VS-1210-SFP-S
Installation Guide PDF-File Install Guide
VS-1210BT/SFP-S
Data Sheet PDF-File Data Sheet
VS-1210BT/SFP-S
Application Guide JPG - File Deployment
VS-1210BT/SFP-S
Installation Guide PDF-File Install Guide

 - Product Photo - Versastream 1G/10G SFP+/SFP NPB /w Filtering & Load Balancing
Versastream 1G/10G SFP+/SFP NPB /w Filtering & Load Balancing

Click to enlarge -  - Product Photo - Versastream 1G/10G SFP+/SFP NPB /w Filtering & Load Balancing
The VERSAstream™ VS-1212/VS-1224 is a 12/24 Port Any-to-Any network monitoring switch with Load Balancing and Packet Filtering that can combine data from multiple Gigabit and 10 Gigabit Ethernet network segments into one or more streams of data. Use it to balance traffic across multiple ports as the volume of data increases. Instead of tools attempting to keep up with high-speed aggregates traffic streams, the VERSAstream can apply packet filters to the data to increase tool efficiency and eliminate port.

Data Capture Infrastructure Optimizes Network Monitoring and Increases Efficiency
Networks are growing more complex, carrying more services, higher volumes of multi-protocol network traffi c, and requiring greater bandwidth. At the same time, network and security personnel are required to monitor and analyze more links in greater detail throughout the network in order to meet application performance demands, minimize security threats, and meet regulatory compliance. Higher speed networks are being deployed, fueling the need for higher speed monitoring tools. Datacom Systems helps solve many of today's most pressing tool deployment problems by allowing organizations to conveniently connect 10G and 1G test and monitoring tools to any traffic on the network.

Load Balancing
Balance traffic across multiple ports to allow growth as the volume of data increases. Load balancing helps prevent loss of data by enabling deployment of redundant security tools that can back each other up, in the event of failure or during while their software updates. As links get faster, you need to be able to distribute traffic across lower speed analysis tools. Load balancing allows you to extend the life of existing lower speed devices as your network traffic increases.

Data Filtering
Instead of tools attempting to keep up with high-speed aggregates traffic streams, the VERSAstream can apply packet filters to the data to increase tool efficiency and eliminate port oversubscription. Line-rate hardware fi ltering on each port allows you to customize and streamline the amount and type of data each connected monitoring tool receives. Because they are receiving only traffic of interest, tools run faster, data is more manageable, and issues are resolved quicker. Command line filtering uses Wireshark based syntax.

Aggregation (Many-to-Any)
Many-to-Any monitoring access aggregates network traffic and provides visibility for one or more monitoring tools. Aggregate and reassemble full duplex conversations from one or more trunked links. Perfect for tools that don't support multiple monitoring interfaces or for redundant networks, EtherChannel, load balanced servers, and asymmetrically routed traffic.

Regeneration (Any-to-Many)
Any-to-Many confi gurations replicate copies of identical network traffic to provide multiple tools with monitoring access to the same links. In addition to eliminating contention for scarce SPAN ports and test access points, multiple tools can be connected to the same link for redundancy, testing, or advanced monitoring applications.

Port Steering (Any-to-Any)
Any of the ports can be confi gured as input (network) or output (monitoring) ports on the fly through an easy to use command line interface (CLI) or Web-based management.


VS-1212-F
 
12 Port Any-to-Any Switch with Filtering & Load Balancing

VS-1224-F
 
24 Port Any-to-Any Switch with Filtering & Load Balancing

Accessories
SFP+-LR/LX LR Singlemode 10G/1G Transceiver  
SFP+-SR/SX SR Multimode 10G/1G Transceiver  
SFP-RJ45 10/100/1000BT Copper Transceiver  
SFP-LX 1G Singlemode Fiber Transceiver (9µ)  
SFP-SX 1G Multimode Fiber Transceiver (50 or 62.5µ)  

ANY TO ANY PORTS:
- Any-to-Any Ports: Twelve (12) (Supports SFP+ SR, LR, LRM, SFP SX, LX, BT)
- Management Port: RJ45
- Console Port: DB9

POWER REQUIREMENTS:
- Dual Redundant Hot Swappable Power Supplies (Included)
- Maximum Power Consumption: Less than 200 Watts
- Individual Power Supply Rating: 100-240V ~47-63Hz 4A MAX.

CERTIFICATIONS: CE, RoHS

DIMENSIONS (HxWxD): 1.72 x 19.00 x 21.00 in (4,4 x 48,3 x 53,3 cm)

WEIGHT: 18.15 lbs (8,23 kg)

ENVIRONMENTAL:
- Operating Temperature: 32° to 131°F (0° to 55°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C)
- Humidity: 5 to 95% non-condensing

FILTERING:
- IPv4 Address Sources and Destinations, Subnets
- MAC Address Sources and Destinations
- Ports
- Ethertype
- VLAN
- IPv6 Address Sources and Destinations, Subnets

WARRANTY: One (1) Year Hardware Warranty included

  • Port Steering Any-to-Any ports allow traffic aggregation and copies to multiple tools
  • SFP flexibility-supports copper and fiber media
  • Single point of deployment and remote management minimizes management expenses and reduces MTTR
  • Deploy tools right away without impacting your production network
  • Keep all your tools plugged in while troubleshooting
  • Easily share scarce SPAN ports and test access points without maintenance windows or approval
  • Provide immediate network access for new compliance monitors
VS-1212-F
Data Sheet PDF-File Data Sheet
VS-1212-F
Application Guide JPG - File Deployment
VS-1224-F
Data Sheet PDF-File Data Sheet
VS-1224-F
Application Guide JPG - File Deployment

 - Product Photo - SINGLEstream™ 10/100/1000 Link Aggregation Tap
SINGLEstream™ 10/100/1000 Link Aggregation Tap

Click to enlarge -  - Product Photo - SINGLEstream™ 10/100/1000 Link Aggregation Tap
The SINGLEstream™ SS-1204BT Link Aggregation Tap is inserted inline (ports 1 and 2) and will collect traffic from a network link and allow you to combine it into a single output. With 2 monitoring ports (3 and 4), you can have 2 copies of that aggregate data, or when link utilization is high, keep the full duplex streams seperate. The SINGLEstream™ SS-2206BT-BT-S Link Aggregation Tap is inserted inline and can collect traffic from two network links and allow you to combine traffic into a single output. With 2 monitoring ports, you can have 2 copies of that aggregate data, or keep the full duplex streams seperate, when utilization is high. For additional flexibility, the monitor ports, 5 and 6 can also receive traffic from an external mirror port or another tap.

Aggregation
Monitoring network traffic from two different sources is an important and frequent requirement in network analysis, commonly referred to as data aggregation. For example, in order to properly troubleshoot mostnetwork problems, network professionals need to receive traffic from both sides of a full duplex conversation.

While traditional taps might enable full-duplex monitoring of all traffic on a network link, they transmit the data to the connected monitoring device in two separate half-duplex streams (one for Tx and one for Rx). Not only does this require the monitoring device to have two network interface cards, it also requires that the device be capable of combining and processing both streams of data in order to monitor both sides of the conversation. Not all monitoring systems, including the most popular software solutions, have the required hardware to aggregate traffic.

The SINGLEstream Link Aggregation Tap combines both directions of a full duplex data stream and allows any connected monitoring device, including those with only one NIC, to receive a copy of all the data - in a single trace file.

Dual Stream Mode
For dual-receive capable tools and times when there is no substitute for full line rate data capture (e.g. network attacks), the SINGLEstream can be configured to work exactly like a traditional full duplex tap, providing a copy of full-rate Gigabit data to connected tools in two separate streams (Tx and Rx).

LINKprotect™
Many traditional taps prevent the operation of redundant routing and failover systems because they keep both sides of the network invisible to the other. The built-in LINKprotect feature eliminates this point of network failure by continuously monitoring both sides of the tapped network for link status. If one side of the tap loses link status, LINKprotect™ will close the other side of the link, so routers and switches can engage protocols to bypass the failed link.

LINKprotect will also keep monitoring both sides of the link until repaired, where it can then automatically re-establish the primary link. Timers (polling and recovery) and link reestablishment settings (manual or auto) are all user-configurable on both sides of the link and provide a level of convenience and flexibility not previously available in copper Gigabit taps.

Regeneration
One-to-Many configurations replicate copies of identical network traffic to provide multiple tools monitoring access to the same links. In addition to eliminating contention for access to critical links, multiple tools can be connected to the same link for redundancy, testing, or advanced monitoring applications.

Reliable and Easy to Use
Unlike setting up operating systems and binding NICs, the SINGLEstream Link Aggregation Tap is simple to deploy, and every unit comes with dual redundant power supplies to
ensure monitoring uptime


SS-1204BT-BT-S
 
10/100/1000 Link Aggregation Tap with 2 Copper Monitoring Ports

SS-1204BT-SFP-S
 
10/100/1000 Link Aggregation Tap with 2 SFP Monitoring Ports

SS-2206BT-BT-S
 
2x 10/100/1000 Dual Link Aggregation Tap with 2 Copper Monitoring Ports

Accessories
RPS-12-5-AC 12-TAP Dual Redundant Rack Mountable AC Power Supply Unit  
RPS-12-5-DC 12-TAP Dual Redundant Rack Mountable DC Power Supply Unit  
RMC-12-2 12-TAP 6U Rack Mount Chassis  
RMC-2 2-TAP 1U Rack Mount Chassis  
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

PORTS:
- Network:
-- SS-1204BT: One (1) 10/100/1000 Network Tap (RJ45)
-- SS-2206BT-BT-S: Two (2) 10/100/1000 Network Taps (RJ45)

- Monitoring:
-- SS-1204BT-BT-S: Two (2) 10/100/1000 Any-to-Any Ports (RJ45)
-- SS-1204BT-SFP-S: Two (2) 10/100/1000 Any-to-Any Ports (SFP)
-- SS-2206BT-BT-S: Two (2) 10/100/1000 Any-to-Any Ports (RJ45)

- Management (front): RJ45 @ 100 Mbps Full-Duplex
- Serial (rear): DB9F

POWER REQUIREMENTS:
- Two (2) External AC Adapters (included)
- Input: 100-240 VAC, 50-60Hz, 0.8A

CERTIFICATIONS: CE, RoHS

PHYSICAL DIMENSIONS (HxWxD): 1.10 x 8.00 x 7.00 in (2,8 x 20,3 x 17,8 cm)

WEIGHT: 1.6 lbs (0.7 kgs)

ENVIRONMENT:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C )
- Humidity: 5 to 90% non-condensing

WARRANTY: One (1) Year Hardware Warranty

  • View entire full-duplex conversations using single interface monitoring tools
  • Save money by reducing the number of required tools or tool interfaces necessary to monitor all your data
  • Decrease reliance on switch resources for network management visibility
  • Eliminate SPAN port contention, oversubscription, and configuration errors
  • Deploy tools immediately without impacting your productionnetwork
  • Easily share tap ports for improved monitoring without maintenance windows
  • Single point of deployment and remote management minimizes management expenses and MTTR
  • One tool can monitor two network links
  • SS-1204BT-SFP-S: SFP ports allow media flexibility for monitoring or SPAN input
SS-1204BT-BT-S
Data Sheet PDF-File Data Sheet
SS-1204BT-BT-S
Application Guide JPG - File Deployment
SS-1204BT-BT-S
Installation Guide PDF-File Install Guide
SS-1204BT-SFP-S
Data Sheet PDF-File Data Sheet
SS-2206BT-BT-S
Application Guide JPG - File Deployment
SS-2206BT-BT-S
Installation Guide PDF-File Install Guide
SS-2206BT-BT-S
Data Sheet PDF-File Data Sheet

 - Product Photo - SINGLEstream™ 10G Fiber Link Aggregation Tap
SINGLEstream™ 10G Fiber Link Aggregation Tap

Click to enlarge -  - Product Photo - SINGLEstream™ 10G Fiber Link Aggregation Tap
The SS-2212-10G is passivley inserted inline and can collect traffic from ten network links and direct two links full duplex traffic toward two outputs. Non-powered, built in fiber taps mean that traffic is safely collected with less that 10ns of latency added to the network. With 2 monitoring ports, you can have 2 copies of full duplex, line rate data streams. The SS-2212-10G is best used where a large number of 10G links need to be troubleshot quickly with one or two analytic devices.

Reliable Visibility from Ten (10) 10G Links to 2 Monitoring Devices. Direct Each Tool to Any Tapped Link

10 Gigabit Access
The SS-2212-10G In-Line fiber network tap allows you to directa copy of traffic from any of the ten tapped network links and send the copy to one or both monitoring tools. Passive and non-intrusive visibility is available for two 10G monitoring tools.

Totally Passive and Power Fault Tolerant
Integrated fiber taps are completely passive devices and are not a point of failure on the network. Even if power is lost to the tap, the network traffic will not be affected. If one side of the link fails for any reason, the device on the other side of the link will recognize this outage immediately, so routers and switches can engage redundant protocols and failover systems.

Zero Latency
Fiber taps allow traffic to flow between network devices through an optical to optical interface, which resolves any latency concerns between network devices.

Regeneration
One-to-Many configurations replicate copies of identical network traffic to provide multiple tools monitoring access to the same links. In addition to eliminating contention for access to critical links, multiple tools can be connected to the same link for redundancy, testing, or advanced monitoring applications.

Interconnect up to 8 devices
Provide analyzer access for up to 80 10G links by interconnecting up to 8 SS-2212-10G devices. When interconnected, they present a single logical unit where one tool can be easily directed to receive a copy of traffic from any of up to 80 network links. A second tool can receive traffic from the same link or any of the other 80 links that are tapped.

Graphic Display and Command Line Interface
The front panel graphic display allows users to determine where the copy of network link traffic is sent. Since the SINGLEstream™ can be interconnected, up to 8 deep, the address of each device, is available on the front panel. Power levels (in dB) on each link are available to determine if other network changes have occurred such as bad patch cords.

Reliable and Easy to Use
The SINGLEstream™ Network Tap is simple to deploy, and every unit comes with dual redundant hot-swappable power supplies to ensure monitoring uptime.


SS-2212-10G
 
SINGLEstream 10G Link Network Tap (10 Taps, 2 Non-Aggregated Monitoring Ports, Common Ports SR or LR

SS-2222-10G
 
SINGLEstream 10G Link Network Tap (10 Taps, 2 Non-Aggregated Monitoring Ports, 10 Dedicated Monitoring Ports, Common Ports SR

Accessories
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

SS-2212-10G


ANY TO ANY PORTS:
- Network: Ten (10) SR or LR Network Taps with Dual LC connectors
- Monitoring: Two (2) SR or LR Monitoring Ports
- Management Port: RJ45
- Console Port: DB9

SPLIT RATIO:
- 50/50, 70/30, 80/20
- Additional Split Ratios Available

INSERTION LOSS*:
- Multimode (choose 50/62.5 micron diameter) 50/50 = 4.2 dB
- Multimode (choose 50/62.5 micron diameter) 70/30 = 3.0 / 6.7 dB
- Singlemode (9 micron diameter) 50/50 = 3.9 dB
- Singlemode (9 micron diameter) 70/30 = 2.2 / 6.3 dB
* typical per fiber

POWER REQUIREMENTS:
- Dual Redundant Hot Swappable Power Supplies (Included)
- Maximum Power Consumption: Less than 200 Watts
- Individual Power Supply Rating: 100-240V ~47-63Hz 4A MAX.

CERTIFICATIONS: CE, RoHS

DIMENSIONS (HxWxD): 1.72 x 19.00 x 26.5 in (4.37 x 48.26 x 67.31 cm)

WEIGHT: 18.15 lbs (8.23 kgs)

ENVIRONMENTAL:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C)
- Humidity: 5 to 90% non-condensing

WARRANTY: One (1) Year Hardware Warranty


SS-2222-10G

Following soon ...

  • Access up to 80 10G links with 2 analytic tools
  • 100% uptime, fiber taps are built into the device so there is no potential loss of traffic on the network
  • Eliminate SPAN port contention, oversubscription and configuration errors
  • Tapped ports can be directed to any monitor port
  • Up to 8 devices can be stacked to look like a single logical unit
SS-2212-10G
Data Sheet PDF-File Data Sheet
SS-2212-10G
Application Guide JPG - File Deployment

 - Product Photo - SINGLEstream™ 10/100/1000 or 1G Link Aggregation Tap
SINGLEstream™ 10/100/1000 or 1G Link Aggregation Tap

Click to enlarge -  - Product Photo - SINGLEstream™ 10/100/1000 or 1G Link Aggregation Tap

Provide Multiple Tool Access and Achieve Full-Duplex Visibility for Two (2) resp. Four (4) In-Line Network Links Even with Single Interface solutions

Aggregation
Monitoring full duplex network traffic from multiple sources is often a critical requirement for network monitoring applications. For example, in order to properly monitor redundant networks or a pair of load balanced links, network professionals might need to receive traffic simultaneously from two different network segments.

In some cases, two network links may be bound together and operate as one logical network in order to improve bandwidth. In such an implementation, packets are distributed across two different physical links. Often, traffic transmits on one segment and receives on another. This makes network analysis and monitoring especially challenging. If an analyzer or monitoring device is put on only one physical link, it will not see the entire conversation.

The SINGLEstream Dual Link Aggregation Tap can selectively combine a full duplex data stream to allow connected monitoring devices, even those with only one NIC to receive a copy of all the data collected from both taps in a single trace file.

LINKprotect™
Many traditional taps prevent the operation of redundant routing and failover systems because they keep both sides of the network invisible to the other. The built-in LINKprotect™ feature eliminates this point of network failure by continuously monitoring both sides of the tapped network for link status. If one side of the tap loses link status, LINKprotect™ will close the other side of the link, so routers and switches can engage protocols to bypass the failed link.

LINKprotect™ will also keep monitoring both sides of the link until repaired, where it can then automatically re-establish the primary link. Timers (polling and recovery) and link re-establishment settings (manual or auto) are all user-configurable on both sides of the link and provide a level of convenience and flexibility not previously available in copper Gigabit taps.

Regeneration
One-to-Many configurations replicate copies of identical network traffic to provide multiple tools monitoring access to the same links. In addition to eliminating contention for access to critical links, multiple tools can be connected to the same link for redundancy, testing, or advanced monitoring applications.

Reliable and Easy to Use
Unlike setting up operating systems and binding NICs, the SINGLEstream™ Link Aggregation Tap is simple to deploy, and every unit comes with dual redundant power supplies to ensure monitoring uptime.


SS-2210BT-BT/SFP-S
 
Dual Link Aggregation Tap with 6 SFP or Copper Monitoring Ports

SS-4210BT-SFP-S
 
Quad Link Aggregation Tap with 2 SFP Monitoring Ports

Accessories
SFP-RJ45 10/100/1000BT Copper Transceiver  
SFP-LX 1G Singlemode Fiber Transceiver (9µ)  
SFP-SX 1G Multimode Fiber Transceiver (50 or 62.5µ)  
RMC-2 2-TAP 1U Rack Mount Chassis  
RMC-12-2 12-TAP 6U Rack Mount Chassis  
RPS-12-5-AC 12-TAP Dual Redundant Rack Mountable AC Power Supply Unit  
RPS-12-5-DC 12-TAP Dual Redundant Rack Mountable DC Power Supply Unit  
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

PORTS:

- Network:
-- SS-2210BT-BT/SFP-S: Two (2) 10/100/1000 Network Taps (RJ45)
-- SS-4210BT-SFP-S: Four (4) 10/100/1000 Network Taps (RJ45)

- Monitoring:
-- SS-2210BT-BT/SFP-S: Four (4) RJ45 and Two (2) SFP Any-to-Any Ports
-- SS-4210BT-SFP-S: Two (2) SFP Any to Any Ports

- Management: RJ45 @ 100Mbs Full-Duplex
- Serial (rear): DB9F

POWER REQUIREMENTS:
- Two (2) External AC Adapters (included)
- Input: 100-240 VAC, 50-60Hz, 0.8A

CERTIFICATIONS: CE, RoHS

PHYSICAL DIMENSIONS (HxWxD): 1.10 x 8.00 x 7.00 in (2.79 x 20.32 x 17.78 cm)

WEIGHT: 1.6 lbs (0.7 kgs)

ENVIRONMENT:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C )
- Humidity: 5 to 90% non-condensing

WARRANTY: One (1) Year Hardware Warranty

  • View entire full-duplex conversations even across redundant links using single-interface monitoring tools
  • Save money by reducing the number of required tools or tool interfaces necessary to monitor all your data
  • Decreased reliance on switch resources for network management visibility
  • Eliminate SPAN port contention, oversubscription, and configuration errors
  • Deploy tools immediately without impacting your production network
  • Easily share tap ports for improved monitoring without maintenance windows
  • Single point of deployment and remote management minimizes management expenses and reduces MTTR
  • One tool can monitor two network links
SS-2210BT-BT/SFP-S
Data Sheet PDF-File Data Sheet
SS-2210BT-BT/SFP-S
Application Guide JPG - File Deployment
SS-4210BT-SFP-S
Installation Guide PDF-File Install Guide
SS-4210BT-SFP-S
Data Sheet PDF-File Data Sheet
SS-4210BT-SFP-S
Application Guide JPG - File Deployment

 - Product Photo - SINGLEstream™ 1G Fiber Link Aggregation Tap
SINGLEstream™ 1G Fiber Link Aggregation Tap

Click to enlarge -  - Product Photo - SINGLEstream™ 1G Fiber Link Aggregation Tap
  • View entire full-duplex conversations using single-interface monitoring tools
  • Decrease reliance on switch resources for network management visibility
  • Eliminate SPAN port contention, oversubscription, and configuration errors
  • Deploy tools immediately without impacting your production network
  • Easily share Test Access Points without maintenance windows or approval
  • Single point of deployment and remote management minimizes management expenses and MTTR
  • Keep your monitoring tool plugged in while troubleshooting the same link

Full Duplex Visibility for Single Interface Monitoring Solutions

Aggregation
Monitoring network traffic from two different sources is an important and frequent requirement in network analysis, commonly referred to as data aggregation. For example, in order to properly troubleshoot most network problems, network professionals need to receive traffic from both sides of a full duplex conversation.

While traditional taps might enable full-duplex monitoring of all traffic on a network link, they transmit the data to the connected monitoring device in two separate half-duplex streams (one for Tx and one for Rx). Not only does this require the monitoring device to have two network interface cards, it also requires that the device be capable of combining and processing both streams of data in order to monitor both sides of the conversation. Not all monitoring systems, including the most popular software solutions, have the required hardware to aggregate traffic.

The SINGLEstream Link Aggregation Tap combines both directions of a full duplex data stream and allows any connected monitoring device, including those with only one NIC, to receive a copy of all the data - in a single trace file.

Dual Stream Mode
For dual-receive capable tools and times when there is no substitute for full line rate data capture (e.g. network attacks), the SINGLEstream can be configured to work exactly like a traditional full duplex tap, providing a copy of full-rate Gigabit data to connected tools in two separate streams (Tx and Rx).

Regeneration
One-to-Many configurations replicate copies of identical network traffic to provide multiple tools monitoring access to the same links. In addition to eliminating contention for access to critical links, multiple tools can be connected to the same link for redundancy, testing, or advanced monitoring applications.

Reliable and Easy to Use
Unlike setting up operating systems and binding NICs, the SINGLEstream Link Aggregation Tap is simple to deploy, and every unit comes with dual redundant power supplies to ensure monitoring uptime


SS-1204LX-BT-S
 
Link Aggregation TAP (1 - 1000LX [9 micron] TAP, 2 - 10/100/1000 Any-to-Any Ports) w/ SSH, SNMP

SS-1204LX-SFP-S
 
Link Aggregation TAP (1 - 1000LX [9 micron] TAP, 2 - SFP Any-to-Any Ports) w/ SSH, SNMP

SS-1204SX-BT-S
 
Link Aggregation TAP (1 - 1000SX [specify 50 or 62.5 micron] TAP, 2 - 10/100/1000 Any-to-Any Ports) w/ SSH, SNMP

SS-1204SX-SFP-S
 
Link Aggregation TAP (1 - 1000SX [50 micron] TAP, 2 - SFP Any-to-Any Ports) w/ SSH, SNMP

SS-1210LX-BT-S
 
Link Aggregation TAP (1 - 1000LX [specify 9 micron] TAP, 8 - SFP Any-to-Any Ports) w/ SSH, SNMP

SS-1210SX-BT-S
 
Link Aggregation TAP (1 - 1000SX [specify 50 or 62.5 micron] TAP, 8 - SFP Any-to-Any Ports) w/ SSH, SNMP

Accessories
RMC-2 2-TAP 1U Rack Mount Chassis  
RPS-12-5-AC 12-TAP Dual Redundant Rack Mountable AC Power Supply Unit  
RPS-12-5-DC 12-TAP Dual Redundant Rack Mountable DC Power Supply Unit  
RMC-12-2 12-TAP 6U Rack Mount Chassis  
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

PORTS:

- Network:
-- SS-1204LX-BT-S: One (1) 1000 Network Tap (LC) (9 micron)
-- SS-1204LX-SFP-S: One (1) 1000 Network Tap (LC) (9 micron)
-- SS-1204SX-BT-S: One (1) 1000 Network Tap (LC) (specify 50 or 62.5 micron)
-- SS-1204SX-SFP-S: One (1) 1000 Network Tap (LC) (50 micron)
-- SS-1210LX-BT-S: One (1) 1000 Network Tap (LC) (9 micron)
-- SS-1210SX-BT-S: One (1) 1000 Network Tap (LC) (specify 50 or 62.5 micron)

- Monitoring:
-- SS-1204LX-BT-S: Two (2) 10/100/1000 Any-to-Any Ports (RJ45)
-- SS-1204LX-SFP-S: Two (2) 1G Any-to-Any Ports (SFP)
-- SS-1204SX-BT-S: Two (2) 10/100/1000 Any-to-Any Ports (RJ45)
-- SS-1204SX-SFP-S: Two (2) 1G Any-to-Any Ports (SFP)
-- SS-1210LX-BT-S: Eight (8) 1G Any-to-Any Ports (SFP)
-- SS-1210SX-BT-S: Eight (8) 1G Any-to-Any Ports (SFP)

- Management (front): RJ45 @ 100 Mbps Full-Duplex
- Serial (rear): DB9F

SPLIT RATIO:
- 50/50, 70/30, 80/20
- Additional Split Ratios Available

INSERTION LOSS*:
- Multimode (choose 50/62.5 micron diameter) 50/50 = 4.2 dB
- Multimode (choose 50/62.5 micron diameter) 70/30 = 3.0 / 6.7 dB
- Singlemode (9 micron diameter) 50/50 = 3.9 dB
- Singlemode (9 micron diameter) 70/30 = 2.2 / 6.3 dB
* typical per fiber

POWER REQUIREMENTS:
- Two (2) External AC Adapters (included)
- Input: 100-240 VAC, 50-60Hz, 0.8A

CERTIFICATIONS: CE, RoHS

PHYSICAL DIMENSIONS (HxWxD): 1.10 x 8.00 x 7.00 in (2,8 x 20,3 x 17,8 cm)

WEIGHT: 1.6 lbs (0.7 kgs)

ENVIRONMENT:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C )
- Humidity: 5 to 90% non-condensing

WARRANTY: One (1) Year Hardware Warranty

  • View entire full-duplex conversations using single interface monitoring tools
  • Fiber tap ports provide passive permanent access to traffic
  • Monitor fiber links with copper media monitoring tools
  • Decrease reliance on switch resources for network management visibility
  • Eliminate SPAN port contention, oversubscription, and configuration errors
  • Deploy tools immediately without impacting your production network
  • Easily share tap ports for improved monitoring without maintenance windows
  • Single point of deployment and remote management minimizes management expenses and MTTR
SS-1204SX-BT-S
Data Sheet PDF-File Data Sheet
SS-1204SX-BT-S
Application Guide JPG - File Deployment
SS-1204SX-SFP-S
Data Sheet PDF-File Data Sheet
SS-1204SX-SFP-S
Application Guide JPG - File Deployment

 - Product Photo - 10/100/1000 Mbit Copper Network & Link Aggregation Tap
HOT
10/100/1000 Mbit Copper Network & Link Aggregation Tap

Click to enlarge -  - Product Photo - 10/100/1000 Mbit Copper Network & Link Aggregation Tap
The CTP-1000 tap can be installed between any two network devices, such as firewalls, routers, or switches, and allow traffic to flow between these network points. The tap makes a copy of the data flowing through it, and provides the packet copy to network appliances or tools for application, security or recording purposes.

Visibility for Single or Dual Interface Monitoring Solutions

The CTP-1000 tap can be installed between any two network devices, such as firewalls, routers, or switches, and allow traffic to flow between these network points. The tap makes a copy of the data flowing through it, and provides the packet copy to network appliances or tools for application, security or recording purposes.

Aggregation Mode
The CTP-1000 can combine the two full duplex network streams of data together into a single monitoring output. Aggregation mode allows a tool with a single port to monitor full duplex communication on a network link. In Aggregation mode, the tap creates identical copies of the aggregate data on the network tapped network link. This mode allows 2 tools to see the same data. Primary and secondary tools are often used with Aggregation mode, since they both see the same network packets.

Non-Aggregation Mode
Non-aggregating mode allows the port to run at full line rate, without dropping traffic. This option is a popular choice when security or packet analyzers need to see every packet. Analyzers and probes connected to 1 Gigabit links can typically only receive a maximum of 1 Gigabit per port. In cases where you want to receive at line rates on a network link, use the CTP-1000 in non-aggregating mode, but remember you need to use 2 ports on your monitoring device to watch both sides of the network link.

Regeneration
In Aggregation mode, the tap generates 2 copies of identical network traffic to provide multiple tools monitoring access to the same link. In addition to eliminating contention for access to critical links, multiple tools can be connected to the same link for redundancy, testing, or advanced monitoring applications.

Reliable and Easy to Use
Unlike setting up operating systems and binding NICs, the CTP-1000 is simple to deploy, and every unit comes with dual redundant power supplies to ensure monitoring uptime. A convenient switch on the back of the device allows users to choose between Aggregation and Non-Aggregation modes. After setting the aggregation switch, the device is plug and play. There is no other configuration or setup necessary for this easy to use, reliable device.

Security
The CTP-1000 does not have MAC addresses so it is essentially invisible to the network. Use the CTP-1000 when you want to collect and capture packets for a security or storage application. The copy of traffic into the security or monitoring tool is one-way, so the CTP-1000 won't become a point of access for hackers, nor can anyone get to the security probe or recording device through the tap (since the traffic is one way).

savvius Insight - Network Performance Monitoring Appliance for smaller Networks


Savvius Insight is the newest and smallest addition to the Omnipliance family of network monitoring appliances. Savvius Insight has no moving parts, connects inline to the network with two bypass ports, and has three extra ports for span port captures.

With the advanced expert system and extensive array of other visual and interactive analysis features built into Savvius Insight, network professionals, IT consultants, and Splunk administrators are armed with the same caliber of tools for monitoring smaller networks that they are used to having for the datacenter with Omnipliances. And like the larger Omnipliances, Savvius Insight performs all capture and analysis locally, and does not require the packets be sent over the network. Savvius Insight also enhances Omnipliance deployments by providing more capture points to take advantage of the built-in Multi-Segment Analysis features of the Omnipliance.

Features:
  • Saves money by having an affordable network monitoring appliance at every location
  • Provides remote troubleshooting and reporting capabilities 24x7 without requiring travel
  • Reduces mean time to resolution (MTTR) by providing advanced troubleshooting capabilities at the edge
  • Increases ROI of Omnipliance deployments through use of OmniPeek and MSA
  • Provides long term reporting through Splunk integration and Savvius for Splunk Dashboards
Data Sheet PDF-File DOWNLOAD Data Sheet

CTP-1000
 
10/100/1000 Mbit Copper Network & Link Aggregation Tap with 2x 10/100/1000 Monitoring Ports

Accessories
Network Performance Monitoring Appliance for smaller Networks
savvius Insight Network Performance Monitoring Appliance for smaller Networks  
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

PORTS:
- Network: One (1) 10/100/1000 Network Tap (RJ45)
- Monitoring: Two (2) 10/100/1000 Any-to-Any Ports (RJ45)

POWER REQUIREMENTS:
- Two (2) External AC Adapters (included)
- Input: 100-240 VAC, 50-60Hz, Max. 50mA at 120VAC

CERTIFICATIONS: CE, RoHS, CAN ICES-3 (A)/NMB-3(A), FCC Part 15 Class B

PHYSICAL DIMENSIONS (HxWxD): 1.07 x 5.00 x 5.00 in (2.7 x 12.72 x 12.7 cm)

WEIGHT: 12 oz. (0.34 kgs)

ENVIRONMENT:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C )
- Humidity: 5 to 90% non-condensing < 25 BTU/h

WARRANTY: One (1) Year Hardware Warranty

  • View entire full-duplex conversations using single-interface monitoring tools
  • Decrease reliance on switch resources for network management visibility. Eliminate SPAN port contention, oversubscription, and configuration errors
  • Deploy tools immediately without impacting your production network
  • Easily share tap ports for improved monitoring without maintenance windows 
  • Single point of deployment and remote management minimizes management expenses and MTTR
  • Easy to deploy- switch selects Aggregation/Non-aggregation mode

 - Product Photo - 10/100/1000 Mbit Copper Network Tap
10/100/1000 Mbit Copper Network Tap

Click to enlarge -  - Product Photo - 10/100/1000 Mbit Copper Network Tap
The 10/100/1000 Ethernet Tap provides easy 24 x 7 access to your 10/100 and Gigabit Ethernet network segments, making it an ideal portable network tap for troubleshooting Ethernet networks with multiple port speeds or for security monitoring applications, where you need non-intrusive, dedicated access to your network.

Ideal for security applications and anywhere you need non-intrusive, dedicated access to your network links

The 10/100/1000 Ethernet TAP from Datacom Systems provides easy 24x7 access to your Gigabit Ethernet segments.

A convenient DIP switch on the back of the tap can be used to select auto-negotiation at 10/100 or fixed speed and duplexing
settings at 1000Mbps. The 10/100/1000 Ethernet TapÂ’s fault tolerant design will help ensure that network performance and
integrity will not be affected by power loss.

  • Permanent In-Line access to 10/100/1000 Ethernet links- eliminates the need for network connectors to be disconnected and connected each time a segment needs to be analyzed or monitored
  • Redundant power supply insures seamless monitoring even if the main power source is unavailable
  • Ideal for Security and Monitoring applications
  • View ALL seven layers of network traffic
  • View ALL traffic on both sides of full duplex links
  • Comes with convenient built-in rack-mount or use an optional rack-mount package to mount 3 units (at 1U) and up to 14 units (at 4U)



10/100/1000 Ethernet Network Tap
 
10/100/1000 Mbit Copper Ethernet Network Tap

Accessories
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

Network Connections: 10/100/1000 Tap (RJ45)

Monitoring Connections: 10/100/1000 (RJ45)

Power:
- Two (2) External AC Adapters (included)
- Input: 100-240 VAC, 50-60Hz, 0.8A

Dimensions (HxWxD):
- 1.07 X 5 X 5 in
- 2.7 X 12.7 X 12.7 cm

Weight: 12 oz. (0,34 Kg)

Certifications: CE, ROHS

Environmental:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C)
- Humidity: 5 to 90% non-condensing

  • Permanent In-Line access to 10/100/1000 Ethernet links- eliminates the need for network connectors to be disconnected and connected each time a segment needs to be analyzed or monitored
  • Redundant power supply insures seamless monitoring even if the main power source is unavailable
  • Ideal for Security and Monitoring applications or as a portable network tap for troubleshooting different areas of your network that operate multiple Ethernet port speeds
  • View all seven layers of network traffic
  • View all traffic on both sides of full duplex links
  • Optional rack-mount package to mount 3 units (1U)

 - Product Photo - 10/100 Mbit Copper Network Tap
10/100 Mbit Copper Network Tap

Click to enlarge -  - Product Photo - 10/100 Mbit Copper Network Tap
The 10/100 Ethernet Tap is a single port device that provides a method to observe traffic on a full duplex Ethernet segment. The 10/100 Ethernet Tap provides easy access to segments while maintaining network integrity. Network performance will not be affected by power loss.

Ideal for security applications and anywhere you need non-intrusive, dedicated access to your network links

The 10/100 Ethernet Tap is a single port device that provides a method to observe traffic on a full duplex Ethernet segment.

The 10/100 Ethernet Tap provides easy access to segments while maintaining network integrity with “no break the link” design.
Network performance will not be affected by power loss.

  • Eliminates the need for network connectors to be disconnected and connected each time a segment needs to be analyzed
  • Non-intrusive, fault-tolerant, invisible to the network
  • Redundant power supply insures seamless monitoring even if the main power source is unavailable
  • Never lose packets from power failure - industry-leading “no break the link” design guarantees network traffic will continue to flow uninterrupted
  • View all traffic on both sides of full duplex links
  • Reduces degradation of switch performance due to port mirroring
  • View Layer 1 and 2 errors such as runts and CRC errors
  • Comes with convenient built-in rack-mount or use an optional rack-mount package to mount 3 units (at 1U) and up to 14 units (at 4U)
  • Passes all pairs
  • Supports Power over Ethernet (PoE)


10/100 AT
 
10/100 Mbit Copper/Ethernet Network Tap

Accessories
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

Network Connections: 10/100 Tap (RJ45)
Monitoring Connections: 10/100 (RJ45)

Power:
Two (2) External AC Adapters (included)
Input: 100-240 VAC, 50-60Hz, 0.8A

Dimensions (HxWxD):
1.07 X 5 X 5 in
2.7 X 12.7 X 12.7 cm

Weight: 8 oz. / 0,23 Kg

Environmental:
Operating Temperature: 32° to 104°F (0° to 40°C)
Storage Temperature: -22° to 149°F (-30° to 65°C)
Humidity: 5 to 90% non-condensing

Certifications: CE, RoHS

Warranty: Two (2) Year Standard Warranty

  • Eliminates the need for network connectors to be disconnected and connected each time a segment needs to be analyzed
  • Non-intrusive, fault-tolerant, invisible to the network
  • Redundant power supply insures seamless monitoring even if the main power source is unavailable
  • Never lose packets from power failure - design guarantees network traffic will continue to flow uninterrupted
  • View all traffic on both sides of full duplex links
  • Reduces degradation of switch performance due to port mirroring
  • View Layer 1 and 2 errors such as runts and CRC errors
  • Comes with convenient built-in rack-mount or use an optional rack-mount package to mount 3 units (at 1U) and up to 14 units (at 4U).
  • Passes all pairs
  • Supports Power over Ethernet (PoE)

 - Product Photo - FTP-1000 Series - 1G/10G Fiber Network Taps
FTP-1000 Series - 1G/10G Fiber Network Taps

Click to enlarge -  - Product Photo - FTP-1000 Series - 1G/10G Fiber Network Taps
1 and 10 Gigabit fiber taps from Datacom Systems provide your network monitoring and security tools passive permanent access into your 1 or 10 Gigabit fiber network. They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed. They also support multiple topologies, including 10 Gigabit Ethernet, ATM, OC3-OC48, and SONET.

Completely passive fault tolerant design. Links stay up even during outage or failure. Ideal for permanent, 24x7 access to your fiber network for Network Analysis, IDS and monitoring applications.

1 and 10 Gigabit fiber taps from Datacom Systems provide your network monitoring and security tools passive permanent access into your 1 or 10 Gigabit fiber network.

These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant, fiber taps will not affect network performance or integrity.

They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed. They also support multiple topologies, including 10 Gigabit Ethernet, ATM, OC3-OC48, and SONET.

Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports.
They are available in a wide array of split ratios, Multimode (SX) or Single-Mode (LX) configurations.
- Rack mount ear included
- Optional 1U rack mount holds 3 taps
- 4U 12 bay rack available


FTP-1504
 
50/50 50µ Fiber Tap (LC Connectors)

FTP-1505
 
50/50 62.5µ Fiber Tap (LC Connectors)

FTP-1506
 
50/50 9µ Fiber Tap (LC Connectors)

FTP-1704
 
70/30 50µ Fiber Tap (LC Connectors)

FTP-1705
 
70/30 62.5µ Fiber Tap (LC Connectors)

FTP-1706
 
70/30 9µ Fiber Tap (LC Connectors)

FTP-1510
 
50/50 50µ Fiber Tap (SC Connectors)

FTP-1511
 
50/50 62.5µ Fiber Tap (SC Connectors)

FTP-1512
 
50/50 9µ Fiber Tap (SC Connectors)

FTP-1710
 
70/30 50µ Fiber Tap (SC Connectors)

FTP-1711
 
70/30 62.5µ Fiber Tap (SC Connectors)

FTP-1712
 
70/30 9µ Fiber Tap (SC Connectors)

Accessories
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

NETWORK PORT: Ten (10) or One (1) Gigabit (LC or SC) Tap Network Connection
MONITOR PORT: Ten (10) or One (1) Gigabit (LC or SC) Monitoring Connection

SPLIT RATIO:
- 50/50, 70/30, 80/20
vAdditional Split Ratios Available

FIBER TYPE: OM3

INSERTION LOSS*:
- Multimode (choose 50/62.5 micron diameter) 50/50 = 4.2 dB
- Multimode (choose 50/62.5 micron diameter) 70/30 = 3.0 / 6.7 dB
- Singlemode (9 micron diameter) 50/50 = 3.9 dB
- Singlemode (9 micron diameter) 70/30 = 2.2 / 6.3 dB
* approximate per fiber

PHYSICAL DIMENSIONS (HxWxD): 1.07" x 5" x 5" (2,7 x 12,7 x 12,7 cm)

WEIGHT: 12 oz (0,34 Kg)

CERTIFICATIONS: CE, ROHS

ENVIRONMENTAL:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C )
- Humidity: 5 to 90% non-condensing

WARRANTY: Two (2) Year Standard Hardware Warranty

Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports
They are available in a wide array of split ratios, Multimode or Single-Mode configurations.
  • Rack mount ear included
  • Optional 1U rack mount holds 3 taps
  • 4U 12 bay rack available

 - Product Photo - FTP-2000/4000 Series - 1G/10G Dual/Quad Fiber Network Taps
FTP-2000/4000 Series - 1G/10G Dual/Quad Fiber Network Taps

Click to enlarge -  - Product Photo - FTP-2000/4000 Series - 1G/10G Dual/Quad Fiber Network Taps
Fiber network taps from Datacom Systems provide your network monitoring and security tools passive permanent access into your fiber network. Topology independent, they can be used for analysis of 10G or 1G network connections These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant.

These taps are topology independent and can be used for analysis of 10G or 1G network connections.

Fiber network taps from Datacom Systems provide your network monitoring and security tools passive permanent access into your fiber network. Topology independent, they can be used for analysis of 10G or 1G network connections.

These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant, fiber taps will not affect network performance or integrity.

Network taps provide permanent In-Line access to network links - eliminates the need for network connectors to be disconnected and connected each time a segment needs to be analyzed. Their completely passive fault tolerant design insures that your links stay up during power outage. They are ideal for permanent 24x7 access to your fiber network for Network Analysis, IDS and monitoring.

Dual Fiber tap units from Datacom Systems support multiple topologies. Provides complete access to your fiber links - our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports. They are available in a wide array of split ratios and conveniently rack-mountable in only 1RU (1.75").

The FTP 4000 is a 10G or 1G Quad Fiber Tap, providing permanent access into four fiber links. This network tap is ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network and non-powered, fiber TAPs will not affect network performance or integrity. Invisible to the network and non-powered, fiber TAPs will not affect network performance or integrity.

  • Passive, non-powered design
  • Four TAPs allow you to connect to one tool per link; tools require a dual NIC card to receive both sides of the conversation
  • Supports multiple topologies, including Gigabit Ethernet, ATM, OC3-OC192 and SONET
  • View layer 1 and 2 errors not seen when performing network monitoring using SPAN ports
  • Space saving design allows you to TAP up to eight links in 1U


FTP-2504
 
50/50 50µ Dual Fiber Tap

FTP-2505
 
50/50 62.5µ Dual Fiber Tap

FTP-2506
 
50/50 9µ Dual Fiber Tap

FTP-2704
 
70/30 50µ Dual Fiber Tap

FTP-2705
 
70/30 62.5µ Dual Fiber Tap

FTP-2706
 
70/30 9µ Dual Fiber Tap

FTP-4504
 
50/50 50µ Quad Fiber TAP

FTP-4505
 
50/50 50µ Quad Fiber TAP

FTP-4506
 
50/50 9µ Quad Fiber TAP

FTP-4704
 
70/30µ Quad Fiber TAP

FTP-4705
 
70/30µ Quad Fiber TAP

FTP-4706
 
70/30 9µ Quad Fiber TAP

Accessories
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

NETWORK PORTS:
FTP-2000: Two (2) Ten (10) or One (1) Gigabit (LC) Tap Network Connections
FTP-4000: Four (4) Ten (10) or One (1) Gigabit (LC) Tap Network Connections

MONITOR PORTS:
FTP-2000: Two (2) Ten (10) or One (1) Gigabit (LC) Monitoring Connections
FTP-4000: Four (4) Ten (10) or One (1) Gigabit (LC) Monitoring Connections

SPLIT RATIO:
- 50/50, 70/30, 80/20
- Additional Split Ratios Available

FIBER TYPE: OM3

INSERTION LOSS*:
- Multimode (choose 50/62.5 micron diameter) 50/50 = 4.2 dB
- Multimode (choose 50/62.5 micron diameter) 70/30 = 3.0 / 6.7 dB
- Singlemode (9 micron diameter) 50/50 = 3.9 dB
- Singlemode (9 micron diameter) 70/30 = 2.2 / 6.3 dB
* approximate per fiber

PHYSICAL DIMENSIONS (HxWxD):
FTP-2000: 1.07 x 5 x 5 in. (2,7 x 12,7 x 12,7 cm)
FTP-4000: 1.13 x 8.75 x 7.75 in. (2,9 x 22,2 x 19,7 cm)

WEIGHT:
FTP-2000: 12 oz. (0.34 Kgs)
FTP-4000: 1.10 lbs. (0.49 Kgs)

ENVIRONMENTAL:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C )
- Humidity: 5 to 90% non-condensing

CERTIFICATIONS: CE, ROHS

WARRANTY: Two (2) Year Standard Hardware Warranty

FTP-2000
  • Dual Fiber tap units from Datacom Systems support multiple topologies.
  • Provides complete access to your fiber links - our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports.
  • They are available in a wide array of split ratios and conveniently rack-mountable in only 1RU (1.75").
FTP-4000
  • Passive, non-powered design
  • Four TAPs allow you to connect to one tool per link; tools require a dual NIC card to receive both sides of the conversation
  • Supports multiple topologies, including Gigabit Ethernet, ATM, OC3-OC192 and SONET
  • View layer 1 and 2 errors not seen when performing network monitoring using SPAN ports
  • Space saving design allows you to TAP up to eight links in 1U

 - Product Photo - FTP-8000/9000 Series - 1G/10G High Density Fiber Network Tap
FTP-8000/9000 Series - 1G/10G High Density Fiber Network Tap

Click to enlarge -  - Product Photo - FTP-8000/9000 Series - 1G/10G High Density Fiber Network Tap
This passive tap provides permanent access into 24, 10 and 1 gigabit fiber links. This high density fiber tap is ideal for security, network monitoring, end to end performance analysis and other applications where you need to have a high number of links simultaneously monitored. It is ideal for large corporate data centers, cloud or communication service providers, or high performance computing environments. Use this tap, anyplace where there is a high density of links that have to be monitored.

High Density Fiber Tap for 10G and 1G Links

Ideal for security applications, network monitoring, and end-to-end performance analysis

FTP-8000
The FTP-8000 passive tap provides permanent access into eight, 10G and 1G fiber links. This high density fiber tap is ideal for security, network monitoring, end to end performance analysis and other applications where you need to have a high number of links simultaneously monitored. It is suited for large corporate data centers, cloud or communication service providers, or high performance computing environments. It is ideal for any place where there is a high density of links that have to be monitored. It has a low impact on network performance and, due to its passive nature, does not affect reliability.

  • Space saving design allows you to TAP up to eight (8) links in 1/2 rack unit of height or sixteen (16) links by using 1 rack unit
    of height - optimizes data center rack usage
  • Integrates easily with our network monitoring switches - deploy when 4 or more ports are required
  • Passive, non-powered architecture - highly reliable and proven architecture
  • Alternative to SPAN ports - captures all traffic including error packets that SPANs may drop
  • Available with various split ratios
FTP-9000
This passive tap provides permanent access into 24, 10 and 1 gigabit fiber links. This high density fiber tap is ideal for security, network monitoring, end to end performance analysis and other applications where you need to have a high number of links simultaneously monitored. It is ideal for large corporate data centers, cloud or communication service providers, or high performance computing environments.
Use this tap anyplace where there is a high density of links that have to be monitored. It has a very low impact on network performance and due to its passive nature does not affect reliability.


FTP-8504
 
50/50 Fiber TAP (50µ)

FTP-8505
 
50/50 Fiber TAP (62.5µ)

FTP-8506
 
50/50 Fiber TAP (9µ)

FTP-8704
 
70/30 Fiber TAP (50µ)

FTP-8705
 
70/30 Fiber TAP (62.5µ)

FTP-8706
 
70/30 Fiber TAP (9µ)

FTP-9504
 
50/50 Fiber TAP (50µ)

FTP-9505
 
50/50 Fiber TAP (62.5µ)

FTP-9506
 
50/50 Fiber TAP (9µ)

FTP-9704
 
70/30 Fiber TAP (50µ)

FTP-9705
 
70/30 Fiber TAP (62.5µ)

FTP-9706
 
70/30 Fiber TAP (9µ)

Accessories
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

NETWORK PORTS:
FTP-8000: Eight (8) Ten (10) or One (1) Gigabit (LC) Tap Network Connections
FTP-9000: Twenty four (24) Ten (10) or One (1) Gigabit (LC) Tap Network Connections

MONITOR PORTS: Eight (8) Ten (10) or One (1) Gigabit (LC) Monitoring Connections

SPLIT RATIO:
- 50/50, 70/30, 80/20
- Additional Split Ratios Available

FIBER TYPE: OM3

INSERTION LOSS*:
- Multimode (choose 50/62.5 micron diameter) 50/50 = 4.2 dB
- Multimode (choose 50/62.5 micron diameter) 70/30 = 3.0 / 6.7 dB
- Singlemode (9 micron diameter) 50/50 = 3.9 dB
- Singlemode (9 micron diameter) 70/30 = 2.2 / 6.3 dB
* approximate per fiber

PHYSICAL DIMENSIONS (H x W x D):
FTP-8000: 0.875 x 17 x 8 in (2,2 x 43,2 x 20,3 cm)
FTP-9000: 1.73 x 18 x 8 in (4,4 x 45,7 x 20,3 cm)

WEIGHT:
FTP-8000: 4 lbs. (1,82 Kg)
FTP-9000: 8.0 lbs (3,63 Kg)

CERTIFICATIONS: CE, ROHS

ENVIRONMENTAL:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C )
- Humidity: 5 to 90% non-condensing

WARRANTY: Two (2) Year Standard Hardware Warranty

  • FTP-8000: Space saving design allows you to TAP up to eight (8) links in 1/2 rack unit of height or sixteen 16 links by using 1 rack unit of height - optimizes data center rack usage Integrates easily with our network monitoring switches - deploy when 4 or more ports are required
  • FTP-9000: Space saving design allows you to tap up to twenty four (24) links in 1 rack unit of height - optimizes data center rack usage
  • Passive, non-powered architecture - highly reliable and proven architecture
  • Alternative to SPAN ports - captures all traffic including error packets that SPANs may drop
  • Available with various split ratios
  • Ruggedized D handles for easy installation

no picture
available
RMC-2 2-TAP 1U Rack Mount Chassis


RMC-2
 
2-TAP 1U Rack Mount Chassis


no picture
available
RMC-12-2 12-TAP 6U Rack Mount Chassis


RMC-12-2
 
12-TAP 6U Rack Mount Chassis


no picture
available
RPS-12-5-AC or -DC 12-TAP Dual Redundant Rack Mountable Power Supply Unit (Specify AC or DC)


RPS-12-5-AC
 
12-TAP Dual Redundant Rack Mountable AC Power Supply Unit

RPS-12-5-DC
 
12-TAP Dual Redundant Rack Mountable DC Power Supply Unit


no picture
available
SFP-SX - 1G Multimode Fiber Transceiver


SFP-SX
 
1G Multimode Fiber Transceiver (50 or 62.5µ)


no picture
available
SFP-LX - 1G Singlemode Fiber Transceiver


SFP-LX
 
1G Singlemode Fiber Transceiver (9µ)


no picture
available
SFP-RJ45 - 10/100/1000BT Copper Transceiver


SFP-RJ45
 
10/100/1000BT Copper Transceiver


no picture
available
VS-1012-F VERSAstream™ Dual Power Supply


VS-1012-F
 
VERSAstream™ 12 Port Data Access Switch SFPs Dual Power Supply


no picture
available
SFP+-SR/SX - SR Multimode 10G/1G Transceiver


SFP+-SR/SX
 
SR Multimode 10G/1G Transceiver


no picture
available
VS-1012-F-1 VERSAstream™ Single Power Supply


VS-1012-F-1
 
VERSAstream™ 12 Port Data Access Switch SFPs Single Power Supply


no picture
available
SFP+-LR/LX - LR Singlemode 10G/1G Transceiver


SFP+-LR/LX
 
LR Singlemode 10G/1G Transceiver


 - Product Photo - 100G Fiber Network Tap
100G Fiber Network Tap

Click to enlarge -  - Product Photo - 100G Fiber Network Tap
The FTP-1546 will tap a 100GBase-LR4 network link, sending a copy of traffic from each device out 2 LC ports in LR format. Uses 9 micron fiber. It provides your network monitoring and security tools with passive permanent access into your 100 Gigabit fiber network.

FTP-1546 Series for 100GBase-LR4 Links

Completely passive fault tolerant design - Monitor 100G multi wavelength links

Ideal for permanent, 24x7 access to your fiber network for Network Analysis, IDS and monitoring applications.

100 Gigabit fiber taps from Datacom Systems provide your network monitoring and security tools passive permanent access into your 100 Gigabit fiber network.
The FTP-1546 will tap a 100GBase-LR4 network link, sending a copy of traffic from each device 2 LC portsin LR format.

Monitor outputs include each wavelength: 1295.56, 1300.05, 1304.59 and 1309.14nm. The FTP-1546 is completely passive and uses no electrical power. These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant, fiber taps will not affect network performance or integrity.

They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed.

Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports.


FTP-1546
 
100Gb Passive TAP with 2 LR4 LC style ports, to tap a 100GBASE-LR4 fiber strand link. and output to 2 LC style monitor ports, 50/50

Accessories
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

NETWORK PORT: Two (2) 100Gb LR4 LC Network Connections

MONITOR PORT: Two (2) 100Gb LR4 LC Monitor Connections

SPLIT RATIO: 50/50

INSERTION LOSS**:
- Network Ports: 4.0 dB insertion loss
- Monitor Ports: 3.5 dB insertion loss
**typical

PHYSICAL DIMENSIONS (H x W x D):
- 1.07 x 5 x 5 in.
- (2.7 x 12.7 x 12.7 cm)

WEIGHT: 12 oz (0.34 kgs)

CERTIFICATIONS: CE, ROHS

ENVIRONMENTAL:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C )
- Humidity: 5 to 90% non-condensing

WARRANTY: Two (2) Year Standard Hardware Warranty

Product Description:
FTP-1546 100Gb Passive TAP with 2 LR4 LC style ports, to tap a 100GBASE-LR4 fiber strand link. and output to 2 LC style monitor ports, 50/50 split ratio. 9 micron fiber.

Optional Equipment:
- RMC-3 3-Unit Rack Mount
- RMC-12-3 12-Unit Rack Mount

Tapped and monitor wavelengths are at 1295.56, 1300.05, 1304.59 and 1309.14nm in complaince with the 100GBASE-LR4 standard. The FTP-1546 is completely passive and uses no electrical power. These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant, fiber taps will not affect network performance or integrity. They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed. Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports.
  • Non-powered, passive tap
  • Optional 1U rack mount holds 3 taps
  • 4U 12 bay rack available

 - Product Photo - 40G Fiber Network Tap
40G Fiber Network Tap

Click to enlarge -  - Product Photo - 40G Fiber Network Tap
40 Gigabit fiber taps from Datacom Systems provide your network monitoring and security tools passive permanent access into your 40 Gigabit fiber network. They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed.

FTP-1518 Series Fiber Tap for Cisco 40G BiDi Links
Completely passive fault tolerant design. Monitor 40G Bidirectional links. Ideal for permanent, 24x7 access to your fiber network for Network Analysis, IDS and monitoring applications.
40 Gigabit fiber taps from Datacom Systems provide your network monitoring and security tools passive permanent access into your 40 Gigabit fiber network. The FTP-1518 will tap a Cisco 40G BiDi network link, sending a bidirectional copy of traffic from each device out a set of 4 LC monitoring ports. The FTP-1518 gives you to access a each wavelength of the fiber connection for monitoring using 40G receive only QSFPs.*
Each monitor port transmits a copy of traffic from a single direction on the fiber. All incoming traffic that is received on the network ports is also copied to the respective monitor port. The FTP-1518 is completely passive and uses no electrical power. These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only
an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant, fiber taps will not affect network performance or integrity.
They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed.
Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports
* monitoring device must support these receivers


FTP-1514/FTP-1714 are ideal for permanent, 24x7 access to your fiber network for Network Analysis, IDS and monitoring applications
40 Gigabit fiber taps from Datacom Systems provide your network monitoring and security tools passive permanent access into your 40 Gigabit fiber network.
These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant, fiber taps will not affect network performance or integrity.
They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed. Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports.


FTP-1516 - Completely passive fault tolerant design. Monitor 40G multi wavelength links.
Ideal for permanent, 24x7 access to your fiber ne work for Network Analysis, IDS and monitoring applications.
40 Gigabit fiber taps f om Datacom Systems provide your network monitoring and security tools passive permanent access into your 40 Gigabit fiber ne work.
The FTP-1516 will tap a 40GBase-LR4 network link, sending a copy of traffic om each device on each wavelength out 4 LC ports in LR format. The FTP-1516 allows you to access a multi-lambda fiber onnection and monitor it by combining 4 SFP+ single wavelength ports into one native 40GbE interface on your monitoring devices.*
Monitor outputs are at 1271, 1291, 1311 and 1331nm. The FTP-1516 is completely passive and uses no electrical power.
These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant, fiber taps will not a ect network performance or integrity.
They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed.
Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports.


FTP-1518
 
40Gb 40Gb Passive TAP with 4 LC style ports to tap a 40G BiDi fiber link, and output to 4 LC style monitor ports.50/50 split ratio. 50 micron fiber

FTP-1514
 
40Gb Passive TAP with 2 MTP ports, to tap a 12 fiber strand link. 50/50 split ratio. 50 micron fiber, with 2 separate MTP output ports

FTP-1714
 
40Gb Passive TAP with 2 MTP ports, to tap a 12 fiber strand link. 70/30 split ratio. 50 micron fiber, with 2 separate MTP output ports

FTP-1516
 
40Gb Passive TAP with 2 LR4 LC style ports, to tap a 40GBASE-LR4 fiber strand link. and output to 8 LC style monitor ports, 50/50 split ratio. 9µ fiber, with 8 separate LC output ports (2 for each wavelength)

Accessories
RMC-2 2-TAP 1U Rack Mount Chassis  
RMC-12-2 12-TAP 6U Rack Mount Chassis  
Network Analysis
savvius Omnipeek Enterprise Network Analysis  

FTP-1518


NETWORK PORT: Two (2) Cisco Bidi 40Gb Network Connections

MONITOR PORT: Four (4) LC Monitor Connections

SPLIT RATIO: 50/50

INSERTION LOSS**:
- Network Ports: 3.8 dB insertion loss
- Monitor Ports: 3.8 dB insertion loss
**typical

PHYSICAL DIMENSIONS (H x W x D):
- 1.07 x 5 x 5 in.
- (2.7 x 12.7 x 12.7 cm)

WEIGHT: 12 oz. (0.34 kgs)

CERTIFICATIONS: CE, ROHS

FIBER TYPE: OS2

ENVIRONMENTAL:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C )
- Humidity: 5 to 90% non-condensing

WARRANTY: Two (2) Year Standard Hardware Warranty


FTP-1514/FTP-1714


NETWORK PORT: Two (2) 40Gb MTP Network Connections

MONITOR PORT: Two (2) 40Gb MTP Monitoring Connections

SPLIT RATIO: 50/50 & 70/30

FIBER TYPE: OM3

INSERTION LOSS*:
- 50/50 split ratio results in a 4.6 dB insertion loss
- 70/30 split ratio results ina a 6.6/2.6 dB insertion loss

* approximate per fiber

FIBER TYPE: OM3

PHYSICAL DIMENSIONS (HxWxD): 1.07 x 5 x 7 in (2.7 x 12.7 x 17.78 cm)

WEIGHT: 15 oz (0,43 Kg)

CERTIFICATIONS: CE, ROHS

ENVIRONMENTAL:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C )
- Humidity: 5 to 90% non-condensing

WARRANTY: Two (2) Year Standard Hardware Warranty


FTP-1516


NETWORK PORT: Two (2) 40Gb LR4 Network Connections

MONITOR PORT: Eight (8) LC Monitor Connections

SPLIT RATIO: 50/50

INSERTION LOSS**:
- Network Ports: 3.4 dB insertion loss
- Monitor Ports: 3.7 dB insertion loss

**typical

PHYSICAL DIMENSIONS (HxWxD): 1.13 x 8.75 x 7.75 in. (2.86 x 22.22 x 19.69 cm)

WEIGHT: 1.10 lbs (0.49 kgs)

CERTIFICATIONS: CE, ROHS

FIBER TYPE: OS2

ENVIRONMENTAL:
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature: -22° to 149°F (-30° to 65°C )
- Humidity: 5 to 90% non-condensing

WARRANTY: Two (2) Year Standard Hardware Warranty

FTP-1518
Monitor outputs are at 850 and 900nm. The FTP-1518 is completely passive and uses no electrical power.

These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant, fiber taps will not affect network performance or integrity.

They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed. Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports.

- Non-powered, passive tap
- Optional 1U rack mount holds 2 taps
- 6U 12 bay rack available

FTP-1514/FTP-1714
Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports
- OM3 fiber
- Rack mount ear included
- Optional 1U rack mount holds 3 taps
- 4U 12 bay rack available

FTP-1516
Monitor outputs are at 1271, 1291, 1311 and 1331nm. The FTP-1516 is completely passive and uses no electrical power.
These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant, fiber taps will not affect network performance or integrity.
They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed.
Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports.
- Non-powered, passive tap
- Optional 1U rack mount holds 2 taps
- 6U 12 bay rack available

*monitoring device must support this feature

FTP-1518
Data Sheet PDF-File Data Sheet
FTP-1518
Installation Guide PDF-File Install Guide
FTP-1514/1714
Data Sheet PDF-File Data Sheet
FTP-1514/1714
Installation Guide PDF-File Install Guide
FTP-1516
Data Sheet PDF-File Data Sheet
FTP-1516
Installation Guide PDF-File Install Guide

no picture
available
RMC-3 - 3-Unit Rack Mount Chassis


RMC-3
 
3-Unit Rack Mount Chassis


no picture
available
RMC-12-3 - 12-Unit Rack Mount


RMC-12-3
 
12-Unit Rack Mount



PRICE REQUEST





*:
3+6=
* MANDATORY INFO.
NOTE:Your data will only be used for internal purposes or - if required - for forwarding to your responsible reseller. It will never be given to any other third party under any circumstances.
+49 6102 7487-0   |       |    Disclaimer   |    General Terms & Conditions   |    Sitemap   |    Imprint
© 2016 by CROSS Industries AG
PRODUCT SEARCH:              SEARCH