NP-Channel - Network Visibility & Test Solutions for Security, Network and Application Performance

BUSCA

Productos > TAP de regeneración

Los TAP de regeneración ofrecen puertos de acceso para monitorización pasivos y permanentes que ofrecen una visibilidad completa de los enlaces cruciales de la red con varios dispositivos.
Diagrama de red - Regeneration Tap
Regeneration Tap Topology
Los TAP de regeneración, compatibles con todas las herramientas de seguridad y gestión de red más importantes, permiten la implementación pasiva simultánea de sistemas de prevención y detección de intrusión, analizadores de protocolos, sondas de monitorización remota (RMON) y otros dispositivos clave. Cada dispositivo de monitorización conectado a los TAP de regeneración ve el mismo tráfico a la vez, lo que ofrece una imagen completa del estado de los enlaces con el fin de facilitar la resolución de problemas y el análisis.

Filter by Topología: Media type:
Vendor:

Regeneration Taps - Foto del producto - 10/100/1000 Mbit Copper Regeneration Tap
10/100/1000 Mbit Copper Regeneration Tap

Haga clic para ampliar - Regeneration Taps - Foto del producto - 10/100/1000 Mbit Copper Regeneration Tap
Ixia Net Optics 10/100/1000 MB Copper Regen Taps solve the key physical layer challenges of multi-device monitoring for 10 MB, 100 MB or 1 Gigabit Ethernet (GE) copper networks. For a complete picture of network health, these taps connect up to sixteen different network management and security devices at any single Ethernet network location.

Keep your intrusion detection and prevention systems, protocol analyzers, RMON probes, and other security devices productive with a single Regen Tap. Maximize resources and save on access points when multiple devices can monitor link traffic simultaneously through a single Regen Tap.

Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the tap still sees all full-duplex traffic as if it were in-line, including errors.

For extra uptime protection, Ixia Net Optics taps offer redundant power connections. Should the primary power source fail, the tap automatically switches to the backup power source. Power LEDs on the front of the tap indicate the current power.


RG-CU3
 
Regeneration Tap, 10/100/1000, Copper, Inline/SPAN, 8x1, AC version

RG-CU3-DC
 
Regeneration Tap, 10/100/1000, Copper, Inline/SPAN, 8x1, DC version

RG-CU3-IL
 
Regeneration Tap, 10/100/1000, Copper, Inline, 8x1, AC version

RG-CU3-IL-DC
 
Regeneration Tap, 10/100/1000, Copper, Inline, 8x1, DC version

Operating:
Operating Temperature: 0ºC to 40ºC
Storage Temperature: -10ºC to 70ºC
Relative Humidity: 10% min, 95% max, non-condensing

Mechanical:
Power Supply (AC): Input: 100-240VAC, 45W, 0.6A at 230VAC, 47-440Hz
Power Supply (DC): Input: 36-72VDC, 45W, 1.2A at 48VDC
Dimensions: 1.72” high x 12.75” deep x 19” wide

Cable Interface:
Copper Cable Type:
- 22-24 AWG unshielded twisted pair cable, CAT5/CAT5E
- Link Distance Supported: 100 meters

Link Distance Supported: 100 meters

Connectors:
Monitoring Ports: 16 RJ45, 8 pin connectors
Network Ports: 2 x 1 stackable RJ45, 8 pin connectors

Certifications: Fully RoHS compliant

  • Optimized and tested for 10/100/1000 Megabit copper networks
  • Enables real-time, simultaneous monitoring of a single Ethernet link with up to sixteen monitoring devices
  • Passes all traffic (including errors) from all layers for comprehensive troubleshooting
  • No IP address is needed for the tap or monitoring device, enhancing monitoring security
  • Redundant power ensures monitoring uptime
  • LED indicators show power, speed, link, and activity status
  • Compatible with all major manufacturers’ monitoring devices, including protocol analyzers, probes, and intrusion detection/prevention systems

Regeneration Taps - Foto del producto - 1G SX/LX/Copper Inline Regeneration Tap, LC-Type
1G SX/LX/Copper Inline Regeneration Tap, LC-Type

Haga clic para ampliar - Regeneration Taps - Foto del producto - 1G SX/LX/Copper Inline Regeneration Tap, LC-Type
Real-time, simultaneous passive monitoring of one GigaBit fiber network link with one to eight 1 Gbps intrusion detection systems, protocol analyzers, RMON probes, and other devices. SFP monitor ports enable you to mix and match monitoring equipment with singlemode fiber, multimode fiber, and copper interfaces.

GigaBit Regeneration Tap with SFP Monitor Ports Multimode and Singlemode Fiber
Net Optics GigaBit Regeneration Taps solve the key physical layer challenges of multi-device monitoring for Gigabit networks. For a complete picture of network health, Regeneration Taps connect up to eight different network management and security devices at any single Gigabit network location.

One Tap, No Idle Resources
Keep your intrusion detection and prevention systems, protocol analyzers, RMON probes, and other security devices productive with a single Regeneration Tap. Maximize resources and save on access points when multiple devices can monitor the same traffic simultaneously through a single one of these Taps.

Modular SFP Monitor Ports
For optimal flexibility, GigaBit Regeneration Taps have SFP monitor ports so they can attach to monitoring equipment with any type of interface - singlemode fiber, multimode fiber, and copper. Just plug in the appropriate SFP transceiver modules for as many and whatever types of tools you want to connect.

Security and Visibility
Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were inline, including Layer 1 and Layer 2 errors.

Reliability
For extra uptime protection, Net Optics Taps offer redundant power connections. Should one power source fail, the Tap continues to operate normally using only the remaining power source. Power LEDs on the front of the Tap indicate the current power.


RG-830
 
8x1 1 Gigabit SX 62,5µm 50:50, Inline MM, with SFP Ports

RG-840
 
8x1 1 Gigabit SX 50µm 50:50, Inline MM, with SFP Ports

RG-843
 
8x1 1 Gigabit SX 50µm 70:30, Inline MM, with SFP Ports

RG-850
 
8x1 1 Gigabit LX 8,5µm 50:50, Inline SM, with SFP Ports

RG-853
 
8x1 1 Gigabit LX 8,5µm 70:30, Inline SM, with SFP Ports

Accessories
1 Gigabit SX Base SFP Transceiver w/cable 62,5µm 850nm 1 Gigabit SX Base SFP Transceiver w/cable 50µm 850nm 1 Gigabit LX Base SFP Transceiver w/cable 8,5µm, 1310nm 1 Gigabit ZX Base SFP Transceiver w/cable 8,5µm, 1550nm 1 Gigabit Copper SFP Transceiver
SFPKT-SX 1 Gigabit SX Base SFP Transceiver w/cable 62,5µm 850nm  
SFPKT-50SX 1 Gigabit SX Base SFP Transceiver w/cable 50µm 850nm  
SFPKT-LX 1 Gigabit LX Base SFP Transceiver w/cable 8,5µm, 1310nm  
SFPKT-ZX 1 Gigabit ZX Base SFP Transceiver w/cable 8,5µm, 1550nm  
SFPKT-GCU 1 Gigabit Copper SFP Transceiver  
10/100/1000Base-T SFP Transceiver w/cable
SFPKT-CU3 10/100/1000Base-T SFP Transceiver w/cable  

Temperature: 0°C to 40°C (Operating), -10°C to 70°C (Storage) Relative Humidity: 10% min, 95% max, non-condensing

Dimensions: 1.75" high x 13" deep x 17" wide, Weight: 5 lbs

Electrical:
Redundant Power Supplies, each: Input: 100-240VAC, 0.5A, 47-63Hz DC Input: -48VDC nominal, -36 to -72VDC, 1A Power Consumption: 45W

Fiber Optic Interface:
Laser: Class I, eye-safe, laser emitter type. These Class I Lasers conform to the applicable requirements per US 21 CFR (J) and EN 60825-1, also UL 1950 applications.

Connectors:
Monitoring Ports: (16) SFP cages (SFP modules are sold separately) Network Ports: (2) LC connectors

Performance:
Drops: No packets dropped from 0 to 1 Gbps

Certifications:
MET (UL), CE, FCC, VCCI, C-Tick, RoHS, WEEE, IEEE 802.3 compliant

SFP Transceiver Kits
SFPKT-SX Gigabit Fiber SX SFP Transceiver (850nm) with cable 62.5µm
SFPKT-50SX Gigabit Fiber SX 50um SFP Transceiver (850nm) with cable 62.5µm
SFPKT-LX Gigabit Fiber LX SFP Transceiver(1310nm) with cable 8.5µm
SFPKT-CU3 10/100/1000 Copper Transceiver with cable
SFP transceivers are required for operation and are sold separately

Passive, Secure Technology
  • Enables real-time monitoring of a single GigaBit link with up to 8 monitoring devices/li>
  • Provides complete full-duplex visibility at 1 Gbps without data stream interference or introducing a point of failure/li>
  • Passes all traffic - including errors - from all layers for comprehensive troubleshooting/li>
  • No IP address is needed for the Tap or monitoring device, enhancing security/li>
  • Redundant power ensures monitoring uptime
Warranty
  • All Net Optics products come standard with a 1 year manufacturer´s warranty
  • Additional Service Plan options to extend warranty coverage are available for purchase
Ease of Use
  • LED indicators show redundant power, speed, link, and activity status
  • Front-mounted connectors support easy installation and operation
  • No custom analyzer cables - each half-duplex data stream has its own connector
  • Compatible with all major manufacturers´ monitoring devices, including protocol analyzers, probes, and intrusion detection systems

Regeneration Taps - Foto del producto - 10G SR/LR Span Regeneration Tap, LC-Type
10G SR/LR Span Regeneration Tap, LC-Type

Haga clic para ampliar - Regeneration Taps - Foto del producto - 10G SR/LR Span Regeneration Tap, LC-Type
Real-time, simultaneous passive monitoring of two 10 GigaBit fiber Span ports with one to four 10 Gbps tools each. SFP+ monitor ports enable you to mix and match intrusion detection systems, protocol analyzers, RMON probes, and other devices with both singlemode and multimode fiber interfaces.

10 GigaBit Span Regeneration Tap with SFP Monitor Ports Multimode and Singlemode Fiber
Net Optics 10 GigaBit Span Regeneration Taps add the flexibility of modular SFP+ monitor ports to solve the key physical layer challenges of multi-device monitoring for 10 Gigabit networks. For a complete picture of network health, these Taps fan out two 10 Gigabit switch Span ports to up to four different network management and security devices each.

One Tap, No Idle Resources
Keep your intrusion detection and prevention systems, protocol analyzers, RMON probes, and other security devices productive with a single Regeneration Tap. Maximize resources and save on access points when multiple devices can monitor the same traffic simultaneously through one Regeneration Tap.

Modular SFP+ Ports
For optimal flexibility, these 10 GigaBit Regeneration Span Taps have SFP+ monitor ports so they can attach to monitoring equipment with any type of fiber interface: singlemode and multimode, and 62.5, 50, or 8.5 µm diameters. Just plug in the appropriate SFP+ transceiver modules for as many and whatever types of tools you want to connect. (1G SFP transceivers are not supported; the Regeneration Tap does not perform data rate conversion.)

Security and Visibility
Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks.

Reliability
For extra uptime protection, Net Optics Taps offer redundant power connections. Should one power source fail, the Tap continues to operate normally using only the remaining power source. Power LEDs on the front of the Tap indicate the current power sources.


RG-845X
 
8x1 10 Gigabit SR 50µm Span Regeneration Tap, with SFP+ Ports

RG-855X
 
8x1 10 Gigabit LR 8,5µm Span Regeneration Tap, with SFP+ Ports

Accessories
10 Gigabit SR Base SFP+ Transceiver w/cable 62,5 850nm 10 Gigabit SR Base SFP+ Transceiver w/cable 50µm 850nm 10 Gigabit LR Base SFP+ Transceiver w/cable 8,5µm, 1310nm 10 Gigabit ER Base SFP+ Transceiver w/cable 8.5µm, 1550nm
SFP+KT-SR 10 Gigabit SR Base SFP+ Transceiver w/cable 62,5 850nm  
SFP+KT-50SR 10 Gigabit SR Base SFP+ Transceiver w/cable 50µm 850nm  
SFP+KT-LR 10 Gigabit LR Base SFP+ Transceiver w/cable 8,5µm, 1310nm  
SFP+KT-ER 10 Gigabit ER Base SFP+ Transceiver w/cable 8.5µm, 1550nm  

Temperature: 0°C to 40°C (Operating), -10°C to 70°C (Storage) Relative Humidity: 10% min, 95% max, non-condensing

Dimensions: 1.75" high x 13" deep x 17" wide, Weight: 5 lbs

Electrical:
Redundant Power Supplies, each: Input: 100-240VAC, 0.5A, 47-63Hz DC Input: -48VDC nominal, -36 to -72VDC, 1A Power Consumption: 45W

Fiber Optic Interface:
Laser: Class I, eye-safe, laser emitter type. These Class I Lasers conform to the applicable requirements per US 21 CFR (J) and EN 60825-1, also UL 1950 applications.

Connectors:
Monitoring Ports: (16) SFP cages (SFP modules are sold separately) Network Ports: (2) LC connectors

Performance:
Drops: No packets dropped from 0 to 10 Gbps

Certifications:
MET (UL), CE, FCC, VCCI, C-Tick, RoHS, WEEE, IEEE 802.3 compliant

Part Numbers:
RG-835X - Regen Tap, 8x1 10 Gigabit Span MM 62.5μm
RG-845X - Regen Tap, 8x1 10 Gigabit Span MM 50μm
RG-855X - Regen Tap, 8x1 10 Gigabit Span SM 8.5μm
Add -DC to the part number for the -48VDC model.

SFP+ Transceiver Kits:
SFPKT-SR 10 Gigabit Fiber SR SFP+ Transceiver (850nm) with cable 62.5 µm
SFPKT-50SR 10 Gigabit Fiber SR 50um SFP+Transceiver (850nm) with cable 50 µm
SFPKT-LR 10 Gigabit Fiber LR SFP+ Transceiver (1310nm) with cable 8.5 µm
SFPKT-ER 10 Gigabit Fiber ER SFP+ Transceiver (1550nm) with cable 8.5 µm
SFP+ transceivers are required for operation and are sold separately

Passive, Secure Technology
  • Enables real-time monitoring of two switch Span ports with four monitoring devices each
  • SFP+ monitor ports attach to monitoring equipment with singlemode fiber and multimode fiber interfaces
  • Provides complete visibility at 10 Gbps without data stream interference or introducing a point of failure
  • Passes all traffic - including errors - from all layers for comprehensive troubleshooting
  • No IP address is needed for the Tap or monitoring device, enhancing security
  • Redundant power ensures monitoring uptime
Warranty
  • All Net Optics products come standard with a 1 year manufacturer´s warranty
  • Additional Service Plan options to extend warranty coverage are available for purchase
Ease of Use
  • LED indicators show redundant power, speed, link, and activity status
  • Front-mounted connectors support easy installation and operation
  • No custom analyzer cables - each half-duplex data stream has its own connector
  • Compatible with all major manufacturers´ monitoring devices, including protocol analyzers, probes, and intrusion detection systems

Regeneration Taps - Foto del producto - 10G SR/LR Inline Regeneration Tap, LC-Type
10G SR/LR Inline Regeneration Tap, LC-Type

Haga clic para ampliar - Regeneration Taps - Foto del producto - 10G SR/LR Inline Regeneration Tap, LC-Type
Real-time, simultaneous passive monitoring of one 10 GigaBit fiber network link with one to eight 10 Gbps intrusion detection systems, protocol analyzers, RMON probes, and other devices. SFP+ monitor ports enable you to mix and match monitoring equipment with both singlemode and multimode fiber interfaces.

10 GigaBit Regeneration Tap with SFP Monitor Ports Multimode and Singlemode Fiber
Net Optics 10 GigaBit Regeneration Taps add the flexibility of modular SFP+ monitor ports to solve key physical layer challenges of multi-device monitoring for 10 Gigabit networks. For a complete picture of network health, Regeneration Taps connect up to eight different network management and security devices at any single 10 Gigabit network location.

One Tap, No Idle Resources
Keep your intrusion detection and prevention systems, protocol analyzers, RMON probes, and other security devices productive with a single Regeneration Tap. Maximize resources and save on access points when multiple devices can monitor the same traffic simultaneously through a single Regeneration Tap. Secure, passive access for multiple devices simply means a better return on monitoring investments.

Modular SFP+ Monitoring Ports
These 10 GigaBit Regeneration Taps provide the added flexibility of SFP+ monitoring ports, which enable them to attach to monitoring equipment with any type of fiber interface: singlemode and multimode, and 62.5, 50, or 8.5 µm diameters. Just plug in the appropriate SFP+ transceiver modules for as many and whatever types of tools you want to connect. (1G SFP transceivers are not supported; the Regeneration Tap does not perform data rate conversion.)

Security and Visibility
Without an IP address, monitoring devices are isolated from the network, dramatically
reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were inline, including Layer 1 and Layer 2 errors.

Reliability
For extra uptime protection, Net Optics Taps offer redundant power connections. Should one power source fail, the Tap continues to operate normally using only the remaining power source. Power LEDs on the front of the Tap indicate the current power source.


RG-830X
 
8x1 10 Gigabit SR - Inline MM 62,5µm 50:50, w/ SFP+ Ports

RG-840X
 
8x1 10 Gigabit SR - Inline MM 50µm 50:50, w/ SFP+ Ports

RG-843X
 
8x1 10 Gigabit SR - Inline MM 50µm 70:30, w/ SFP+ Ports

RG-850X
 
8x1 10 Gigabit LR - Inline SM 8.5µm 50:50, w/ SFP+ Ports

Accessories
10 Gigabit SR Base SFP+ Transceiver w/cable 62,5 850nm 10 Gigabit SR Base SFP+ Transceiver w/cable 50µm 850nm 10 Gigabit LR Base SFP+ Transceiver w/cable 8,5µm, 1310nm 10 Gigabit ER Base SFP+ Transceiver w/cable 8.5µm, 1550nm
SFP+KT-SR 10 Gigabit SR Base SFP+ Transceiver w/cable 62,5 850nm  
SFP+KT-50SR 10 Gigabit SR Base SFP+ Transceiver w/cable 50µm 850nm  
SFP+KT-LR 10 Gigabit LR Base SFP+ Transceiver w/cable 8,5µm, 1310nm  
SFP+KT-ER 10 Gigabit ER Base SFP+ Transceiver w/cable 8.5µm, 1550nm  

Temperature: 0°C to 40°C (Operating), -10°C to 70°C (Storage) Relative Humidity: 10% min, 95% max, non-condensing

Dimensions: 1.75" high x 13" deep x 17" wide, Weight: 5 lbs

Electrical:
Redundant Power Supplies, each: Input: 100-240VAC, 0.5A, 47-63Hz DC Input: -48VDC nominal, -36 to -72VDC, 1A Power Consumption: 45W

Fiber Optic Interface:
Laser: Class I, eye-safe, laser emitter type. These Class I Lasers conform to the applicable requirements per US 21 CFR (J) and EN 60825-1, also UL 1950 applications.

Connectors:
Monitoring Ports: (16) SFP cages (SFP modules are sold separately) Network Ports: (2) LC connectors

Performance:

Drops: No packets dropped from 0 to 10 Gbps

Certifications:
MET (UL), CE, FCC, VCCI, C-Tick, RoHS, WEEE, IEEE 802.3 compliant

Part Numbers:
RG-830X - 8x1 10 Gigabit SR - Inline Multimode 62,5µm 50:50, w/ SFP+ Ports
RG-833X - 8x1 10 Gigabit SR - Inline Multimode 62,5µm 70:30, w/ SFP+ Ports
RG-840X - 8x1 10 Gigabit SR - Inline Multimode 50µm 50:50, w/ SFP+ Ports
RG-843X - 8x1 10 Gigabit SR - Inline Multimode 50µm 70:30, w/ SFP+ Ports
RG-850X - 8x1 10 Gigabit LR - Inline Singlemode 8.5µm 50:50, w/ SFP+ Ports
RG-853X - 8x1 10 Gigabit LR - Inline Singlemode 8.5µm 70:30, w/ SFP+ Ports
Add -DC to the part number for the -48VDC model.

SFP+ Transceiver Kits:
SFP+KT-SR 10 Gigabit Fiber SR SFP+ Transceiver (850nm) with cable 62.5µm
SFP+KT-50SR 10 Gigabit Fiber SR 50um SFP+Transceiver (850nm) with cable 50µm
SFP+KT-LR 10 Gigabit Fiber LR SFP+ Transceiver (1310nm) with cable 8.5µm
SFP+KT-ER 10 Gigabit Fiber ER SFP+ Transceiver (1550nm) with cable 8.5µm
SFP+ transceivers are required for operation and are sold separately

Passive, Secure Technology
  • Enables real-time, simultaneous monitoring of a single 10 Gigabit link with up to 8 monitoring devices
  • SFP+ monitor ports attach to monitoring equipment with singlemode fiber and multimode fiber interfaces
  • Provides complete full-duplex visibility at 10 Gbps without data stream interference or introducing a point of failure
  • Passes all traffic (including errors) from all layers for comprehensive troubleshooting
  • No IP address is needed for the Tap or monitoring device, enhancing security
  • Redundant power ensures monitoring uptime
Warranty
  • All Net Optics products come standard with a 1 year manufacturer´s warranty
  • Additional Service Plan options to extend warranty coverage are available for purchase
Ease of Use
  • LED indicators show redundant power, speed, link, and activity status
  • Front-mounted connectors support easy installation and operation
  • No custom analyzer cables - each half-duplex data stream has its own connector
  • Compatible with all major manufacturers´ monitoring devices, including protocol analyzers, probes, and intrusion detection systems

Regeneration Taps - Foto del producto - 1G SX Inline Regeneration Tap, SC-Type
This product is End Of Live (EOL)
1G SX Inline Regeneration Tap, SC-Type

Haga clic para ampliar - Regeneration Taps - Foto del producto - 1G SX Inline Regeneration Tap, SC-Type
Real-time, simultaneous passive monitoring of GigaBit links with up to four intrusion detection systems, protocol analyzers, RMON probes or other devices.

Net Optics 4x1 GigaBit Regeneration Taps solve the key physical layer challenges of multi-device monitoring for GigaBit fiber networks. For a complete picture of network health, these Taps connect up to four different network management and security devices at any single GigaBit network location.

One Tap, No Idle Resources
Keep your intrusion detection and prevention systems, protocol analyzers, RMON probes, and other security devices productive with a single Regeneration Tap. Maximize resources and save on access points when multiple devices can monitor link traffic simultaneously through a single Regeneration Tap. Secure, passive access for multiple devices simply means a better return on monitoring investments.
Net Optics unique dust cap is tethered to the connector so it is always right where you need it.

Security and Visibility
Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line, including Layer 1 and Layer 2 errors.

Reliability
For extra uptime protection, Net Optics Taps offer redundant power connections. Should the primary power source fail, the Tap automatically switches to the backup power source. Power LEDs on the front of the Tap indicate the current power.

Operating: Operating Temperature: 0°C to 40°C Storage Temperature: -10°C to 70°C Relative Humidity: 10% min, 95% max, non-condensing Mechanical: Power Supply (AC): Input: 100-240VAC, 45W, 0.6A at 230VAC, 47-440Hz Power Supply (DC): Input: 36-72VDC, 45W, 1.2A at 48VDC Dimensions: 1.72” high x 12.75” deep x 19” wide Cable Interface: Copper Cable Type: - 22-24 AWG unshielded twisted pair cable, CAT5/CAT5E - Link Distance Supported: 100 meters Link Distance Supported: 100 meters Connectors: Monitoring Ports: 16 RJ45, 8 pin connectors Network Ports: 2 x 1 stackable RJ45, 8 pin connectors Certifications: Fully RoHS compliant

RGN-SX-IL4
 
4x1 1 Gigabit SX Regeneration Tap, IL, SC-Type, SX 62,5µm, 850nm

Splitter Specifications:
Split Ratio: 50/50

Fiber Type: GigaBit SX Multimode Corning 62.5µm, wavelength 850nm
Insertion Loss: Network Port: 4.5 dB
Monitor Port: 9.0 dB max

Fiber Type: GigaBit LX Singlemode Corning 8.5µm, wavelength 1310nm
Insertion Loss: Network Port: 3.7 dB
Monitor Port: 7.4 dB max

Operating Specifications:
Operating Temperature: 0°C to 40°C
Storage Temperature: -10°C to 70°C
Relative Humidity: 10% min, 95% max, non-condensing

Mechanical Specifications:
Power Supply:
Input: 100-240VAC, 0.5A, 47-63Hz
Dimensions: 1.25” high x 8” deep x 17” wide

Connectors:
(8) Duplex SC connectors (monitor ports)
(2) Duplex SC connectors (network ports)

Fiber Optic Interface:
Connectors: Class I, eye-safe, laser emitter type. These Class I Lasers
conform to the applicable requirements per US 21 CFR (J) and EN 60825-1, also UL 1950 applications.
Optical Transmitter Wave Length: 850 nm nominal
Output Power: -9.5 dB min, -4 dB max
Optical Receiver Input Sensitivity: 0 dB min, -17 dB max

Optical Transmitter Wave Length: 1310 nm nominal
Output Power: -10 dB min, -3 dB max
Optical Receiver Input Sensitivity: -3 dB min, -20 dB max

Certifications:
Fully RoHS compliant

Warranty:
All Net Optics products come standard with a 1 year manufacturer´s warranty
Optional 1 or 2 year extended warranty available at time of product purchase

Passive, Secure Technology
  • Enables real-time, simultaneous monitoring of a single GigaBit link with up to eight monitoring devices
  • Provides complete full-duplex visibility at 1000 Mbps without data stream interference or introducing a point of failure
  • Passes all traffic (including errors) from all layers for comprehensive troubleshooting
  • No IP address is needed for the Tap or monitoring device, enhancing monitoring security
  • Redundant power ensures monitoring uptime
  • Fully IEEE 802.3 compliant
  • Fully RoHS compliant
Ease of Use
  • LED indicators show redundant power, speed, link, and activity status
  • Front-mounted connectors support easy installation and operation
  • Connectors are perfectly angled to reduce cable strain
  • Optional custom monitoring cables support easy full-duplex monitoring by sending each side of the signal to a separate monitoring device NIC
  • Compatible with all major manufacturers’ monitoring devices, including protocol analyzers, probes, and intrusion detection/prevention systems

Regeneration Taps - Foto del producto - 10G LR Inline Regeneration Tap, SC-Type
This product is End Of Live (EOL)
10G LR Inline Regeneration Tap, SC-Type

Haga clic para ampliar - Regeneration Taps - Foto del producto - 10G LR Inline Regeneration Tap, SC-Type
Real-time, simultaneous passive monitoring of 10 GigaBit fiber networks with up to eight 10 Gbps intrusion detection systems, protocol analyzers, RMON probes or other devices.

Net Optics 10 GigaBit Regeneration Taps solve the key physical layer challenges of attaching multiple 10 Gbps monitoring tools on 10 GigaBit fiber networks. For a complete picture of network health, Regeneration Taps copy identical traffic streams four or eight different network management and security devices for complete protocol trouble-shooting.

One Tap, No Idle Resources
Keep your intrusion detection and prevention systems, protocol analyzers, RMON probes, and other security devices productive with a single Regeneration Tap. Maximize resources and save on access points when multiple devices can monitor link traffic simultaneously through a single Regeneration Tap. Secure, passive access for multiple devices simply means a better return on monitoring investments.
Net Optics unique dust cap is tethered to the connector so it is always right where you need it.

Security and Visibility
Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line, including Layer 1 and Layer 2 errors.

Reliability
For extra uptime protection, Net Optics Taps offer redundant power connections. Should the primary power source fail, the Tap automatically switches to the backup power source. Power LEDs on the front of the Tap indicate the current power source.


RGN-LR-IL4
 
4x1 10 Gigabit LR Inline Regeneration Tap, SC-Type, 8,5µm

RGN-LR-IL8
 
8x1 10 Gigabit LR Inline Regeneration Tap, SC-Type, 8,5µm

RGN-50SR-IL4
 
4x1 10 Gigabit SR Inline Regeneration Tap, SC-Type, 50µm

RGN-50SR-IL8
 
8x1 10 Gigabit SR Inline Regeneration Tap, SC-Type, 50µm

RGN-SR-IL4
 
4x1 10 Gigabit SR Inline Regeneration Tap, SC-Type, 62.5µm, 850nm

RGN-SR-IL8
 
8x1 10 Gigabit SR Inline Regeneration Tap, SC-Type, 62.5µm, 1310nm

Splitter Specifications:
Split Ratio: 50/50
Fiber Type: SR Multimode Corning 50µm, wavelength 850nm
Insertion Loss: Network Port: 4.5 dB
Monitor Port: 4.5 dB max
Fiber Type: LR Singlemode Corning 8.5µm, wavelength 1310nm
Insertion Loss: Network Port: 3.7 dB
Monitor Port: 3.7 dB max

Operating Specifications:
Operating Temperature: 0°C to 55°C
Storage Temperature: -10°C to 70°C
Relative Humidity: 10% min, 95% max, non-condensing

Mechanical Specifications:
Power Supply:
Input: 100-240VAC, 0.5A, 47-63Hz
Dimensions: 1.75" high x 10.5" deep x 17" wide

Connectors:
(4 or 8) Duplex SC connectors (monitor ports)
(2) Duplex SC connectors (network ports)

Fiber Optic Interface:
Fiber Type:
Multimode Corning 50µm, wavelength 850nm (SR)
Singlemode Corning 8.5µm, wavelength 1310nm (LR)
Connectors: Class I, eye-safe, laser emitter type. These Class I Lasers
conform to the applicable requirements per US 21 CFR (J) and EN 60825-1, also UL 1950 applications.
Optical Transmitter Wave Length:
850 nm nominal (SR), 1310 nm nominal (LR)
Output Power:
-9.5 dB min, -4 dB max (SR), -10 dB min, -3 dB max (LR)
Optical Receiver Input Sensitivity:
0 dB min, -17 dB max (SR), -3 dB min, -20 dB max (LR)

Certifications:
Fully RoHS compliant

Part Numbers:
RGN-50SR-IL8
RGN-SR-IL4
RGN-LR-IL8
RGN-LR-IL4

Passive, Secure Technology
  • Optimized and tested for 10 GigaBit fiber networks with 50µm fiber
  • Enables real-time, simultaneous monitoring of a single 10 GigaBit link with four or eight monitoring devices
  • Provides complete full-duplex visibility at 10 Gbps without data stream interference or introducing a point of failure
  • Passes all traffic (including errors) from all layers for comprehensive troubleshooting
  • No IP address is needed for the Tap or monitoring device, enhancing monitoring security
  • Redundant power ensures monitoring uptime
  • Fully RoHS compliant
Warranty
  • All Net Optics products come standard with a 1 year manufacturer´s warranty
  • Optional 1 or 2 year extended warranty available at time of product purchase
Ease of Use
  • LED indicators show redundant power, speed, link, and activity status
  • Front-mounted connectors support easy installation and operation
  • Connectors are perfectly angled to reduce cable strain
  • Silk-screened application diagram illustrates all connections for easy deployment
  • Optional custom monitoring cables support easy full-duplex monitoring by sending each side of the signal to a separate monitoring device NIC
  • Tested and compatible with all major manufacturers’ monitoring devices, including protocol analyzers, probes, and intrusion detection/prevention systems


SOLICITUD DE PRECIO





*:
3+6=
* Información necesaria
NOTA:
Sólo utilizaremos sus datos con fines internos y no los compartiremos con terceros bajo ninguna circunstancia
+49 6102 7487-0   |       |    Disclaimer   |    Términos y condiciones generales   |    Sitemap   |    Datos de la empresa
© 2016 by CROSS Industries AG
BUSQUEDA DE PRODUCTOS:              BUSCA