NP-Channel - Network Visibility & Test Solutions for Security, Network and Application Performance

CERCA

Prodotti > Accessori

The following accessories are optionally available for our products:

Foto non
disponibile
RMC-12-3 - 12-Unit Rack Mount


RMC-12-3
 
12-Unit Rack Mount


Foto non
disponibile
RMC-3 - 3-Unit Rack Mount Chassis


RMC-3
 
3-Unit Rack Mount Chassis


Foto non
disponibile
VS-1012-F-1 VERSAstream™ Single Power Supply


VS-1012-F-1
 
VERSAstream™ 12 Port Data Access Switch SFPs Single Power Supply


Foto non
disponibile
VS-1012-F VERSAstream™ Dual Power Supply


VS-1012-F
 
VERSAstream™ 12 Port Data Access Switch SFPs Dual Power Supply


Foto non
disponibile
SFP+-LR/LX - LR Singlemode 10G/1G Transceiver


SFP+-LR/LX
 
LR Singlemode 10G/1G Transceiver


Foto non
disponibile
SFP+-SR/SX - SR Multimode 10G/1G Transceiver


SFP+-SR/SX
 
SR Multimode 10G/1G Transceiver


Foto non
disponibile
SFP-RJ45 - 10/100/1000BT Copper Transceiver


SFP-RJ45
 
10/100/1000BT Copper Transceiver


Foto non
disponibile
SFP-LX - 1G Singlemode Fiber Transceiver


SFP-LX
 
1G Singlemode Fiber Transceiver (9µ)


Foto non
disponibile
SFP-SX - 1G Multimode Fiber Transceiver


SFP-SX
 
1G Multimode Fiber Transceiver (50 or 62.5µ)


Foto non
disponibile
RMC-2 2-TAP 1U Rack Mount Chassis


RMC-2
 
2-TAP 1U Rack Mount Chassis


Foto non
disponibile
RMC-12-2 12-TAP 6U Rack Mount Chassis


RMC-12-2
 
12-TAP 6U Rack Mount Chassis


Foto non
disponibile
RPS-12-5-AC or -DC 12-TAP Dual Redundant Rack Mountable Power Supply Unit (Specify AC or DC)


RPS-12-5-AC
 
12-TAP Dual Redundant Rack Mountable AC Power Supply Unit

RPS-12-5-DC
 
12-TAP Dual Redundant Rack Mountable DC Power Supply Unit


Accessori - Foto Prodotto - Enterprise Network Analysis Software
Enterprise Network Analysis Software

Clicca per ingrandire - Accessori - Foto Prodotto - Enterprise Network Analysis Software
The Most Powerful, Comprehensive Network Analyzer Anywhere
OmniPeek Enterprise is Savvius´s flagship network analyzer. It combines all Savvius network analysis features in a single product. It´s both a stand-alone network analyzer for local captures and a console for analyzing traffic collected from multiple interfaces on multiple capture engines and Omnipliances. It´s an award-winning product that provides rich analytics and intuitive workflows for understanding networks and resolving problems faster than ever before.

OmniPeek Enterprise is Savvius?s flagship product. It combines all of the features of the Savvius distributed network analysis solutions in a single product, including support for local captures from multiple interfaces and connections to an unlimited number of distributed Capture Engines and Omnipliance network analysis and recorder appliances.
OmniPeek Enterprise supports data collection from any network topology, along with correlated visualization through multi segment analysis. OmniPeek Enterprise also provides advanced voice and video over IP functionality including signaling and
media analyses of voice and video, VoIP playback, voice and video Expert analysis, Visual Expert, and more.
OmniPeek Enterprise is ideal for IT organizations responsible for network analysis and network service level agreements (SLAs). A license of OmniPeek
Enterprise should be considered for each location that will be supported by a network engineering professional.


savvius Omnipeek Enterprise
 
Network Analysis


Foto non
disponibile
Niagara 2820-LR-TAP Module


Niagara 2820-LR-TAP
 
4 TAP LR Module for the Niagara 2820 and 2822


Foto non
disponibile
Niagara 2820-SR-TAP Module


Niagara 2820-SR-TAP
 
4 TAP SR Module for the Niagara 2820 and 2822


Foto non
disponibile
Niagara 2820-LX-TAP Module


Niagara 2820-LX-TAP
 
4 TAP 1G LX Module for the Niagara 2820 and 2822


Foto non
disponibile
Niagara 2820-SX-TAP Module


Niagara 2820-SX-TAP
 
4 TAP 1G SX Module for the Niagara 2820 and 2822


Foto non
disponibile
Niagara 2820-TX-TAP Module


Niagara 2820-TX-TAP
 
4 TAP TX 1G Module for the Niagara 2820 and 2822


Foto non
disponibile
Niagara 2820-QSFP-PM Module


Niagara 2820-QSFP-PM Module
 
Quad Port Packetmaster QSFP Module for the Niagara 2820 and 2822 - 4 QSFP+


Foto non
disponibile
Niagara 2820-SFP-PM Module


Niagara 2820-SFP-PM
 
8 Packetmaster Ports SFP Module for the Niagara 2820 and 2822 - 8 SFP/SFP+


Foto non
disponibile
Niagara 2820-40G-LR-BP Module


Niagara 2820-40G-LR-BP
 
Single Network Segment 40Gb LR Bypass Module for the Niagara 2820 and 2822


Foto non
disponibile
Niagara 2820-40G-SR-BP Module


Niagara 2820-40G-SR-BP
 
Single network segment 40Gb SR Bypass module for the Niagara 2820 and 2822


Foto non
disponibile
Niagara 2820-LR-BP Module


Niagara 2820-LR-BP
 
10Gb LR Dual segment Bypass module for the Niagara 2820 and 2822


Foto non
disponibile
Niagara 2820-SR-BP Module


Niagara 2820-SR-BP
 
10Gb SR Dual segment Bypass module for the Niagara 2820 and 2822


Foto non
disponibile
Niagara 2820-PM Chassis


Niagara 2820-PM Chassis
 
8 Segment Modular Bypass PacketMaster Chassis


Foto non
disponibile
Niagara 2820-Chassis


Niagara 2820-Chassis
 
8 Segment Modular Bypass Chassis


Foto non
disponibile
NTO 7300 series - Alarm and 1588 (PTP) Timestamp Source


MOD-7300-PTPALARM
 
NTO 7300 series - Alarm and 1588 (PTP) timestamp source.The module provides phyical connections for external alarms and a 1588 timestamp source for the chassis modules.


Foto non
disponibile
Smart blank module for NTO 7300 series


MOD-7300-SMARTBLANK
 
Smart blank module for NTO 7300 series


Foto non
disponibile
10GE SFP+ Optical Transceiver - LR 1310nm (10km)


N-SM1310-PLUS
 
10GE SFP+ Optical Transceiver - LR 1310nm (10km)


Foto non
disponibile
10GE SFP+ Optical Transceiver - SR 850nm (300 meters)


N-MM850-PLUS
 
10GE SFP+ Optical Transceiver - SR 850nm (300 meters)


Foto non
disponibile
1GE SFP Copper Transceiver


N-CGI
 
1GE SFP Copper Transceiver


Foto non
disponibile
1GE SFP Optical Transceiver - LX 1310nm (10km)


N-SM1310
 
1GE SFP Optical Transceiver - LX 1310nm (10km)


Foto non
disponibile
1GE SFP Optical Transceiver - SX 850nm (550 meters)


N-MM850
 
1GE SFP Optical Transceiver - SX 850nm (550 meters)


Foto non
disponibile
100GE CFP Optical Transceiver - 100GBASE - LR4 1310nm (10km)


CSM1310
 
100GE CFP Optical Transceiver - 100GBASE - LR4 1310nm (10km)


Foto non
disponibile
100GE CFP Optical Transceiver - 100GBASE - SR10 850nm (150m)


CMM850
 
100GE CFP Optical Transceiver - 100GBASE - SR10 850nm (150m)


Foto non
disponibile
LRM Transceiver


LRM1310-PLUS
 
LRM Transceiver


Foto non
disponibile
40GE QSFP+ Optical Transceiver - 850nm (150 meters)


QMM850-PLUS
 
40GE QSFP+ Optical Transceiver - 850nm (150 meters)


Foto non
disponibile
10GE XFP Optical Transceiver - LR 1310nm (10km)


XSM1310
 
10GE XFP Optical Transceiver - LR 1310nm (10km)


Foto non
disponibile
10GE XFP Ethernet only Optical Transceiver - SR 850nm (300 meters)


XMM850-E
 
10GE XFP Ethernet only Optical Transceiver - SR 850nm (300 meters)


Foto non
disponibile
10GE SFP+ Optical Transceiver - LR 1310nm (10km)


SM1310-PLUS
 
10GE SFP+ Optical Transceiver - LR 1310nm (10km)


Foto non
disponibile
10GE SFP+ Optical Transceiver - SR 850nm (300 meters)


MM850-PLUS
 
10GE SFP+ Optical Transceiver - SR 850nm (300 meters)


Foto non
disponibile
1GE SFP Copper Transceiver


CGI
 
1GE SFP Copper Transceiver


Foto non
disponibile
1GE SFP Optical Transceiver - LX 1310nm (10km)


SM1310
 
1GE SFP Optical Transceiver - LX 1310nm (10km)


Foto non
disponibile
1GE SFP Optical Transceiver-SX 850nm (550 meters)


MM850
 
1GE SFP Optical Transceiver-SX 850nm (550 meters)


Accessori - Foto Prodotto - Director Network Module, 10/100/1000Base-T w/ Zero Delay
Director Network Module, 10/100/1000Base-T w/ Zero Delay

Clicca per ingrandire - Accessori - Foto Prodotto - Director Network Module, 10/100/1000Base-T w/ Zero Delay
Director Network Module (DNM) is a pluggable, field upgradeable Director module with 12 network ports. Depending on the DNM model, each module provides 6 in-line links or 12 Span ports, supporting Gigabit SX/LX/ZX Fiber or 10/100/1000 Copper media.

Trouble-Free Protection Against Link, Application and Power Failure

DNM-101 is changing the way the world stays online. This mighty module with Net Optics™ new Virtual Zero Delay™ (VZD) circuitry keeps traffic passing should a Director™ or Director Pro™ lose power. It´s all you need for continuous uptime - protecting your network, links and applications - no matter what!

The New Way to Say Reliability

Net Optics new DNM-101 Module´s innovative Virtual Zero Delay circuitry guarantees that your Director™ and Director Pro™ in-line copper connections will never lose their links when power goes off for whatever reason - such as power failures or during planned power up and power down events. In the past, link renegotiation has been a major challenge for copper Taps, costing precious seconds or minutes of link downtime when Tap power transitions. DNM-101 VZD eliminates those lengthy renegotiation cycles by preserving the link state through power transitions, as if no break existed.

DNM-101: The "Good Night´s Sleep" Module

Now you can stop worrying about power and application failures. This revolutionary new technology, available exclusively from Net Optics, improves network reliability dramatically when using copper taps. It eliminates the delay typically caused when other Taps lose power. That small delay can cascade into much longer delays as devices on the link detect a failure and attempt to re-establish communication. The DNM-101 module is quick and simple to install in your Director or Director Pro.

DNM-101 offers 12 copper ports for 6 in-line "Tap" connections and easily plugs in to all models of Director and Director Pro.


DNM-101
 
Director Network Module, Inline, 10/100/1000Base-T, 12 Ports, w/ Virtual Zero Delay

Performance
Hardware throughput: 12Gbps
Network recovery time: 40ms at 1Gbps
RMON statistics: Current utilization, peak utilization, peak time, total packets, total bytes, CRC errors, collision packets, oversize packets, undersize packets. Available via Indigo Management Software.
Alarms: Utilization threshold alarm for each network port programmable through Director CLI

Mechanical
Dimensions:1.35´ high x 10.38´ deep x 5.05´ wide
Weight: 1.5lbs

Indicators
(All ports) Link LEDs (with speed indication on Copper ports), (All ports) Activity LEDs

Certifications
Fully RoHS compliant

Interface
(12) RJ45 Network Ports 10/100/1000Mbps
(6) In-line
22-24 AWG unshielded twisted pair cable, CAT5e or better recommended

Compatible with all models of Director and Director Pro

Part Numbers
10/100/1000 Copper In-Line,VZD Module: DNM-101


Accessori - Foto Prodotto - ControlTower - Complete Visibility of Your Network
ControlTower - Complete Visibility of Your Network

Clicca per ingrandire - Accessori - Foto Prodotto - ControlTower - Complete Visibility of Your Network
Complete Visibility of Your Network

Ixia ControlTower™ is an advanced network visibility resource for centralized, intelligent monitoring. ControlTower helps enterprises and service providers achieve end-to-end visibility within their physical, virtual, and SDN networks. A distributed architecture provides IT with access to monitoring and diagnostic tools from any point within the network.

This solution solves some of the biggest challenges facing network administrators: smooth and rapid scaling, flexible deployment, and the need to monitor the network end-to-end. Now you have a proven solution for implementing multiple segments and centralized, intelligent monitoring. Ixia ControlTower™ architecture delivers major advantages:

Top-of-Rack Solution
Cloud-hosting centers with their extreme need for flexibility and scalability call for top-of-rack or end-of-row deployment in a scalable, flexible data center environment. Like its airport namesake, Ixia ControlTower offers a total view from far above the traffic, enabling complete visibility of your network. Place a member at the top of each rack or end of each row, collect relevant traffic, and bring it back to the monitoring tool farm for inspection.

Campus Reach
In enterprise campus environments, IT needs to extend visibility into various buildings; as opposed to a perimeter-enclosed central data center or internet access point. Advanced Persistent Threats may lurk deep within the network and in any building, accessing corporate information such as product designs or pricing data. Ixia´s ControlTower is the ideal cost-effective architecture to enable network-wide visibility. Its tool-farm approach maximizes monitored segments while minimizing the number of interconnect trunk links.

OpenFlow Networks
Ixia’s ControlTower and OpenFlow work together to bring unprecedented scalability to your Visibility Architecture by combining the flexibility and scalability of OpenFlow with the power and advanced capabilities of ControlTower. Working in conjunction with Ixia’s Open API and OpenFlow, ControlTower delivers massive scalability and flexibility to maximize visibility using either existing or dedicated switch resources.

Ease of Management
Ixia’s ControlTower architecture supports a centralized data center high-port-density solution, stacking multiple members in a single location and treating the stack as a single, large chassis. This flexible approach offers the port density and ease of management of a single-chassis solution; additionally, there is no change in administrative overhead if some of the visibility ports must be deployed in a remote equipment rack or building.

This carrier-grade solution for service providers features redundant power supplies, hitless changes to the filter criteria, a hardened chassis with NEBS certification, and OpenFlow integration.


Key Features
  • Reduces the number of interconnect trunk links to an absolute minimum
  • Monitors multiple segments across the enterprise network
  • Deploys a centralized "farm" of cost effective, high-capacity security toolsto monitor physically distributed locations
  • Scales monitored segments and tools without increasing management overhead
Solution Brief - CT Architecture
Data Sheet PDF-File Data Sheet
Solution Brief -OpenFLow
Data Sheet PDF-File Data Sheet

Accessori - Foto Prodotto - ControlTower Member - NTO 5263
ControlTower Member - NTO 5263

Clicca per ingrandire - Accessori - Foto Prodotto - ControlTower Member - NTO 5263
ControlTower Member Brings Monitoring Visibility, Scalability to Carrier Deployments

Ixia´s ControlTower™ architecture solves some of the biggest challenges facing network administrators, namely the need for visibility, rapid scalability, flexible deployments, and network-wide application and security monitoring. The products included within the ControlTower architecture are the ControlTower Supervisor (NTO 5260) and ControlTower Members (NTO 5263 and/or NTO 5268) with functions centrally managed by the Supervisor.

The Ixia ControlTower Member NTO 5263 is a high-density, NEBS Level 3-compliant 40GE/10GE/1GE network monitoring switch designed for large, complex central offices and data centers. It helps monitor the rapidly growing number of 1GE, 10GE, and 40GE network segments using existing monitoring tools. The NTO’s ControlTower Supervisor keeps the management of multiple NTO’s simple. NTO 5263 is supported by the NVOS 4.1 and later software.

New features such as the NEBS Level 3 certification, RESTful API, and IPv6 (supported by NVOS 4.1 and later versions) make ControlTower the ideal solution for service providers. These features deliver a robust feature set for current needs, while preparing SPs for future needs such as extended addressing and central office automation initiatives.


SYS-5263Q-STD
 
Anue 5263 ControlTower Member base system. This part is sold as an upgrade to a ControlTower System. Includes the following: 1x 5263 ControlTower Member chassis, 1x 5263 ControlTower Member management module, 3x 526X fan modules, 1x 4-port 40G QSFP module

MOD-526XACMOD
 
Single(1) AC Power Module

MOD-526XDCMOD
 
Single(1) DC Power Module

MOD-526XFANMOD
 
Single (1) fan module unit

MOD-526XIFMOD-10G
 
Single 526X 16-port interface module. Supports up to 16 SFP/SFP+ optical modules. 16-port 1/10G licensed is included.

MOD-526XIFMOD-40G
 
Single 526X 4-port interface module. Supports up to 4 QSFP+ optical modules.4-port 40G licensed is included.

MOD-P5200-X8D-ADV
 
8 x 10G Optical SFP+ Ethernet Port Advanced Feature Module

MOD-P5200-X16D-ADV
 
16 x 10G Optical SFP+ Ethernet Port Advanced Feature Module

LIC-P5200-X8D-ADV-UP
 
Upgrade MOD-P5200-X8D-ADV Advanced Feature Module to MOD-P5200-X16D-ADV

Key Features
  • Ability to perform advanced, granular filtering capability including: Packet De-Duplication, Packet Trimming, MPLS Stripping, GTP Stripping, and Extended Burst Protection
  • NEBS Level 3 certification with redundant power supplies
  • RESTful web API promotes automation initiatives
  • External alarm connections available for integration to central office alarms
  • IPv6 provides extended IP addressing support
  • Optional Advanced Packet Processing available for packet de-duplication, extended burst protection, MPLS stripping, and packet / payload trimming (AFM16)

Accessori - Foto Prodotto - ControlTower Member - NTO 5268
ControlTower Member - NTO 5268

Clicca per ingrandire - Accessori - Foto Prodotto - ControlTower Member - NTO 5268
High-density switching designed for large, complex data centers

Ixia’s ControlTower™ architecture addresses major, ever-increasing pressures on network administrators, including the need for rapid scalability, flexible deployments, and network-wide application and security monitoring.

Products based on the new ControlTower architecture are ControlTower Supervisor (NTO 5260) and ControlTower Member (NTO 5268)—a high-density 1GE/10GE/40GE network monitoring switch designed for large and complex data centers. It helps you monitor your rapidly growing number of 1GE, 10GE, and 40GE network segments with existing monitoring tools, while keeping the management of multiple NTO’s simple via the ControlTower Supervisor

With the ControlTower Member NTO 5268, your data centers can be equipped with technology positioned to keep up with growing data and traffic on the network.

The Ixia ControlTower Member NTO 5268 is designed for large and complex data centers. It helps monitor more efficiently using existing monitoring tools. This switch enables data centers to keep up with growing data and traffic on the network. New features such as a RESTful API and IPv6 (supported with NVOS 4.1 and later versions) make ControlTower the perfect solution for service providers. These features provide a robust feature set for the current needs of enterprises while also preparing enterprises for future needs like extended addressing and data center automation initiatives.


SYS-5268Q-STD
 
Anue 5268 ControlTower Member base system. This part is sold as an upgrade to a ControlTower System. Includes the following: 1x 5268 ControlTower Member chassis, 1x 5268 ControlTower Member management module, 3x 526X fan modules, 1x 4-port 40G QSFP module

SYS-5268S-STD
 
Anue 5268 ControlTower Member base system. This part is sold as an upgrade to a ControlTower System. Includes the following: 1x 5268 ControlTower Member chassis, 1x 5268 ControlTower Member management module, 3x 526X fan modules, 1x 16-port 10G SFP+ module

MOD-526X-ACMOD
 
Single(1) AC Power Module

MOD-526X-DCMOD
 
Single(1) DC Power Module

MOD-526X-FANMOD
 
Single (1) fan module unit

MOD-526X-IFMOD-10G
 
Single 526X 16-port interface module. Supports up to 16 SFP/SFP+ optical modules. 16-port 1/10G licensed is included.

MOD-526X-IFMOD-40G
 
Single 526X 4-port interface module. Supports up to 4 QSFP+ optical modules. 4-port 40G licensed is included.

MOD-P5200-X8D-ADV
 
8 x 10G Optical SFP+ Ethernet Port Advanced Feature Module

MOD-P5200-X16D-ADV
 
16 x 10G Optical SFP+ Ethernet Port Advanced Feature Module

LIC-P5200-X8D-ADV-UP
 
Upgrade MOD-P5200-X8D-ADV Advanced Feature Module to MOD-P5200-X16D-ADV

Key Features
  • Protects investments in deployed monitoring tools
  • Monitors virtual and private cloud infrastructures at full line rate
  • Scalable, modular configuration
  • Non-blocking switch architecture – share traffic anywhere within a ControlTower cluster from any network access point to any monitoring tool at full line rate
  • High availability with redundant management ports, power supplies, and hot-swappable fan modules
  • Green solution – 2U form factor, front-to-back airflow, and low power footprint
  • Optional Advanced Packet Processing available for packet de-duplication, nbsp;extended burst protection, MPLS stripping, and packet / payload trimming (AFM16)
  • High density switching for Top Of Rack and End of Row data center deployments or distributed campus environments
  • Performs advanced, granular filtering along with Packet De-Duplication, Packet Trimming, MPLS Stripping, GTP Stripping and Extended Burst Protection
  • RESTful webAPI allows the NTO to be incorporated as part of your data center automation initiatives like consolidated management, centralized provisioning and service orchestration
  • IPv6 provides extended IP addressing support

Accessori - Foto Prodotto - Advanced Feature Module (AFM) for NTOs
Advanced Feature Module (AFM) for NTOs

Clicca per ingrandire - Accessori - Foto Prodotto - Advanced Feature Module (AFM) for NTOs
Advanced Feature Modules help network engineers to improve monitoring tool performance by optimizing the monitored network traffic to include only the essential information needed for analysis.

The Ixia NTO family of Advanced Feature Modules (AFM) helps network engineers to improve monitoring tool performance by optimizing the monitored network traffic to include only the essential information needed for analysis.

Network monitoring is critical to network visibility in enterprise data centers and the IP-based segments of telecommunication service provider networks. The importance of monitoring is reflected in the large investments large enterprises and service providers make in monitoring tools and the staff to manage them. However, demand for higher data rates outpaces gains in monitoring tool performance. With networks growing in speed and little budget to upgrade tools, network engineers need ways to get better performance from their existing monitoring tools.

The AFM family of cards uniquely provide improved security, allow rapid scalability, future-proofs existing tools, and eases management of monitoring networks by providing unprecedented levels of control over monitored traffic.


MOD-P5200-X8D-ADV
 
8 x 10G Optical SFP+ Ethernet Port Advanced Feature Module with - quantity 8 ports licensed

MOD-P5200-X16D-ADV
 
16 x 10G Optical SFP+ Ethernet Port Advanced Feature Module with - quantity 16 ports licensed

LIC-P5200-X8D-ADV-UP
 
Upgrade MOD-P5200-X8D-ADV Advanced Feature Module to MOD-P5200-X16D-ADV

LIC-P5200-X4D-ADV-UP
 
License to enable four (4) additional advanced feature module (AFM) ports on a MOD-P5200-X8D-ADV module

MOD-P5200-X2D-ADV
 
Advanced Feature Module with 10G or 1G Optical SFP/SFP+ Ethernet Ports - quantity two. Ports can be used with SFP or SFP+ transceivers

MOD-7300-CARRIER
 
7300-Carrier Line Module - This module provides four licensed 40G ports, and 2 optional cassette slots for advanced hardware features

MOD-7215-IFMOD-AFM16
 
7300- 16-Port 10G Advance Feature Module Cassette (992-0067)

MOD-7311-IFMOD-AF
 
7300- Single, 8x40G and 16x10G advanced feature module

Advanced Packet Processing Features
  • Packet De-Duplication - A normally configured SPAN port can generate multiple copies of the same packet, dramatically reducing the effectiveness of monitoring tools. The AFM eliminates redundant packets, at full line rate, before they reach your monitoring tools.
  • Extended Burst Protection - Deep buffering allows monitoring tools to see every packet, even when aggregate bandwidth temporarily exceeds port capacity
  • Packet Trimming - Some monitoring tools only need to analyze packet headers. In other monitoring applications, meeting regulatory compliance requires tools remove sensitive data from captured network traffic. The AFM can remove payload data from the monitored network traffic, which boosts tool performance and keeps sensitive user data secure.
  • Protocol Stripping - Many network monitoring tools have limitations when handling some types of Ethernet protocols. The AFM enables monitoring tools to monitor required data by removing GTP, MPLS, VNTag, and FabricPath headers from the packet stream

Accessori - Foto Prodotto - Director Network Module, 1 Gigabit ZX Singlemode
Director Network Module, 1 Gigabit ZX Singlemode

Clicca per ingrandire - Accessori - Foto Prodotto - Director Network Module, 1 Gigabit ZX Singlemode
Director Network Module (DNM) is a pluggable, field upgradeable Director module with 12 network ports. Depending on the DNM model, each module provides 6 in-line links or 12 Span ports, supporting Gigabit SX/LX/ZX Fiber or 10/100/1000 Copper media. Director supports up to 2 modules. Each Director chassis has two DNM slots that may be populated with different models of DNM.

Director Network Module (DNM) is a pluggable, field upgradeable Director module with 12 network ports. Depending on the DNM model, each module provides 6 in-line links or 12 Span ports, supporting Gigabit SX/LX/ZX Fiber or 10/100/1000 Copper media. Director supports up to 2 modules. Each Director chassis has two DNM slots that may be populated with different models of DNM.

Virtual Zero Delay
VZD is a new, patent-pending technology from Net Optics designed to improve network reliability when using copper taps. Net Optics´ new DNM-101 Module´s innovative Virtual Zero Delay circuitry guarantees that Director™ and Director Pro™ in-line copper connections will never lose their links when power goes off for whatever reason-such as power failures or during planned power up and power down events. In the past, link renegotiation has been a major challenge for copper taps, costing precious seconds or minutes of link downtime when Tap power transitions. DNM-1O1 VZD liminates those lengthy renegotiation cycles by preserving the link state through power transitions, as if no break existed.


DNM-320
 
Director Network Module, Inline, 1 Gigabit ZX Singlemode, 8,5µm

DNM-330
 
Director Network Module, SPAN, 1 Gigabit ZX Singlemode, 8,5µm

Performance:
Hardware throughput: 12Gbps
Network Recovery time (DNM-101): Zero Delay at 1Ombps, <50µs @ 100mbps,40ms at 1Gbps
RMON statistics: Current utilization, peak utilization, peak time, total packets, total bytes, CRC errors, collision packets, oversize packets, undersize packets. Available via Indigo Management Software.
Alarms: Utilization threshold alarm for each network port programmable through Director CLI

Mechanical:
Dimensions: 1.35" high x 10.38" deep x 5.05" wide
Weight: 1.5 lbs

Indicators: (All ports) Link LEDs (with speed indication on Copper ports), (All ports) Activity LEDs

Copper Interfaces:
(12) RJ45 Network Ports 10/100/1000Mbps
(6) In-line or (12) SPAN depending on model
22-24 AWG unshielded twisted pair cable, CAT5e or better recommended

Fiber Optic Interfaces:
(12) Gigabit SX Network Ports, LC type
(6) In-line or (12) SPAN depending on model
Fiber Type: Corning Multimode 50 or 62.5/125µm, 850 nm
Transceiver: GigaBit SX 850nm, VCSEL, supports 62.5/125µm
Transceiver: Gig2iBit LX 1310nm or 1550nm, VCSEL, supports 8.5/125µm
Safety: Class 1, eye safe, laser emitter type; conforms to the applicable requirements per US 21 CFR (J) and EN 60825-1; also UL 1950 applications

Certifications: Fully RoHS compliant

Part Numbers:
DNM-100: DNM, CU3, inline
DNM-101: DNM, CU3, inline, Virtual Zero Delay
DNM-110: DNM, CU3, Span
DNM-200: DNM, Fiber, MM, Inline, 62.5µm, 850nm, 50:50
DNM-202: DNM, Fiber, MM, Inline, 62.5µm, 850nm, 70:30
DNM-210: DNM, Fiber, MM, Span, 62.5µ, 850nm
DNM-220: DNM, Fiber, MM, Inline, 5Oµm, 850nm, 50:50
DNM-222: DNM, Fiber, MM, Inline, 50µm, 850nm, 70:30
DNM-230: DNM, Fiber, MM, Span, 50µm, 850nm
DNM-300: DNM, Fiber, SM, Inline, 8.5µm, 1310nm,50:50
DNM-302: DNM, Fiber, SM, Inline, 8.5µm, 1310nm 70:30
DNM-310: DNM, Fiber, SM, Span, 8.5µm, 1310nm
DNM-320: DNM, Fiber, SM, Inline, 8.5µm, 1550nm, 50:50
DNM-330: DNM, Fiber, SM, Span, 8.5µm, 1550nm

  • Twelve 1Gbps ports
  • Fiber and Copper media support
  • In-line and SPAN network modules
  • Virtual Zero Delay™
  • Passive in-line or span access
  • Link fault detect (LFD)
  • Status LEDs for each port
  • RMON-type statistics
  • IEEE 8O2.3az, SyncE compliant*
  • Compatible with all models of Director and Director Pro
*Applies to DNM-101 Only

Accessori - Foto Prodotto - Director Network Module, 1 Gigabit LX Singlemode
Director Network Module, 1 Gigabit LX Singlemode

Clicca per ingrandire - Accessori - Foto Prodotto - Director Network Module, 1 Gigabit LX Singlemode
Director Network Module (DNM) is a pluggable, field upgradeable Director module with 12 network ports. Depending on the DNM model, each module provides 6 in-line links or 12 Span ports, supporting Gigabit SX/LX/ZX Fiber or 10/100/1000 Copper media. Director supports up to 2 modules. Each Director chassis has two DNM slots that may be populated with different models of DNM.

Director Network Module (DNM) is a pluggable, field upgradeable Director module with 12 network ports. Depending on the DNM model, each module provides 6 in-line links or 12 Span ports, supporting Gigabit SX/LX/ZX Fiber or 10/100/1000 Copper media. Director supports up to 2 modules. Each Director chassis has two DNM slots that may be populated with different models of DNM.

Virtual Zero Delay
VZD is a new, patent-pending technology from Net Optics designed to improve network reliability when using copper taps. Net Optics´ new DNM-101 Module´s innovative Virtual Zero Delay circuitry guarantees that Director™ and Director Pro™ in-line copper connections will never lose their links when power goes off for whatever reason-such as power failures or during planned power up and power down events. In the past, link renegotiation has been a major challenge for copper taps, costing precious seconds or minutes of link downtime when Tap power transitions. DNM-1O1 VZD liminates those lengthy renegotiation cycles by preserving the link state through power transitions, as if no break existed.


DNM-300
 
Director Network Module, Inline, 1 Gigabit LX Singlemode, 8,5µm, 50:50

DNM-302
 
Director Network Module, Inline, 1 Gigabit LX Singlemode, 8,5µm, 70:30

DNM-310
 
Director Network Module, SPAN, 1 Gigabit LX Singlemode, 8,5µm

Performance:
Hardware throughput: 12Gbps
Network Recovery time (DNM-101): Zero Delay at 1Ombps, <50µs @ 100mbps,40ms at 1Gbps
RMON statistics: Current utilization, peak utilization, peak time, total packets, total bytes, CRC errors, collision packets, oversize packets, undersize packets. Available via Indigo Management Software.
Alarms: Utilization threshold alarm for each network port programmable through Director CLI

Mechanical:
Dimensions: 1.35" high x 10.38" deep x 5.05" wide
Weight: 1.5 lbs

Indicators: (All ports) Link LEDs (with speed indication on Copper ports), (All ports) Activity LEDs

Copper Interfaces:
(12) RJ45 Network Ports 10/100/1000Mbps
(6) In-line or (12) SPAN depending on model
22-24 AWG unshielded twisted pair cable, CAT5e or better recommended

Fiber Optic Interfaces:
(12) Gigabit SX Network Ports, LC type
(6) In-line or (12) SPAN depending on model
Fiber Type: Corning Multimode 50 or 62.5/125µm, 850 nm
Transceiver: GigaBit SX 850nm, VCSEL, supports 62.5/125µm
Transceiver: Gig2iBit LX 1310nm or 1550nm, VCSEL, supports 8.5/125µm
Safety: Class 1, eye safe, laser emitter type; conforms to the applicable requirements per US 21 CFR (J) and EN 60825-1; also UL 1950 applications

Certifications: Fully RoHS compliant

Part Numbers:
DNM-100: DNM, CU3, inline
DNM-101: DNM, CU3, inline, Virtual Zero Delay
DNM-110: DNM, CU3, Span
DNM-200: DNM, Fiber, MM, Inline, 62.5µm, 850nm, 50:50
DNM-202: DNM, Fiber, MM, Inline, 62.5µm, 850nm, 70:30
DNM-210: DNM, Fiber, MM, Span, 62.5µ, 850nm
DNM-220: DNM, Fiber, MM, Inline, 5Oµm, 850nm, 50:50
DNM-222: DNM, Fiber, MM, Inline, 50µm, 850nm, 70:30
DNM-230: DNM, Fiber, MM, Span, 50µm, 850nm
DNM-300: DNM, Fiber, SM, Inline, 8.5µm, 1310nm,50:50
DNM-302: DNM, Fiber, SM, Inline, 8.5µm, 1310nm 70:30
DNM-310: DNM, Fiber, SM, Span, 8.5µm, 1310nm
DNM-320: DNM, Fiber, SM, Inline, 8.5µm, 1550nm, 50:50
DNM-330: DNM, Fiber, SM, Span, 8.5µm, 1550nm

  • Twelve 1Gbps ports
  • Fiber and Copper media support
  • In-line and SPAN network modules
  • Virtual Zero Delay™
  • Passive in-line or span access
  • Link fault detect (LFD)
  • Status LEDs for each port
  • RMON-type statistics
  • IEEE 8O2.3az, SyncE compliant*
  • Compatible with all models of Director and Director Pro
*Applies to DNM-101 Only

Accessori - Foto Prodotto - Director Network Module, 1 Gigabit SX Multimode
Director Network Module, 1 Gigabit SX Multimode

Clicca per ingrandire - Accessori - Foto Prodotto - Director Network Module, 1 Gigabit SX Multimode
Director Network Module (DNM) is a pluggable, field upgradeable Director module with 12 network ports. Depending on the DNM model, each module provides 6 in-line links or 12 Span ports, supporting Gigabit SX/LX/ZX Fiber or 10/100/1000 Copper media. Director supports up to 2 modules. Each Director chassis has two DNM slots that may be populated with different models of DNM.

Director Network Module (DNM) is a pluggable, field upgradeable Director module with 12 network ports. Depending on the DNM model, each module provides 6 in-line links or 12 Span ports, supporting Gigabit SX/LX/ZX Fiber or 10/100/1000 Copper media. Director supports up to 2 modules. Each Director chassis has two DNM slots that may be populated with different models of DNM.

Virtual Zero Delay
VZD is a new, patent-pending technology from Net Optics designed to improve network reliability when using copper taps. Net Optics´ new DNM-101 Module´s innovative Virtual Zero Delay circuitry guarantees that Director™ and Director Pro™ in-line copper connections will never lose their links when power goes off for whatever reason-such as power failures or during planned power up and power down events. In the past, link renegotiation has been a major challenge for copper taps, costing precious seconds or minutes of link downtime when Tap power transitions. DNM-1O1 VZD liminates those lengthy renegotiation cycles by preserving the link state through power transitions, as if no break existed.


DNM-200
 
Director Network Module, Inline, 1 Gigabit SX Multimode, 62,5µm, 50:50

DNM-202
 
Director Network Module, Inline, 1 Gigabit SX Multimode, 62,5µm, 70:30

DNM-210
 
Director Network Module, SPAN, 1 Gigabit SX Multimode, 62,5µm

DNM-220
 
Director Network Module, Inline, 1 Gigabit SX Multimode, 50µm, 50:50

DNM-222
 
Director Network Module, In-Line, 1 Gigabit SX Multimode, 50µm, 70:30

DNM-230
 
Director Network Module, SPAN, 1 Gigabit SX Multimode, 50µm

Performance:
Hardware throughput: 12Gbps
Network Recovery time (DNM-101): Zero Delay at 1Ombps, <50µs @ 100mbps,40ms at 1Gbps
RMON statistics: Current utilization, peak utilization, peak time, total packets, total bytes, CRC errors, collision packets, oversize packets, undersize packets. Available via Indigo Management Software.
Alarms: Utilization threshold alarm for each network port programmable through Director CLI

Mechanical:
Dimensions: 1.35" high x 10.38" deep x 5.05" wide
Weight: 1.5 lbs

Indicators: (All ports) Link LEDs (with speed indication on Copper ports), (All ports) Activity LEDs

Copper Interfaces:
(12) RJ45 Network Ports 10/100/1000Mbps
(6) In-line or (12) SPAN depending on model
22-24 AWG unshielded twisted pair cable, CAT5e or better recommended

Fiber Optic Interfaces:
(12) Gigabit SX Network Ports, LC type
(6) In-line or (12) SPAN depending on model
Fiber Type: Corning Multimode 50 or 62.5/125µm, 850 nm
Transceiver: GigaBit SX 850nm, VCSEL, supports 62.5/125µm
Transceiver: Gig2iBit LX 1310nm or 1550nm, VCSEL, supports 8.5/125µm
Safety: Class 1, eye safe, laser emitter type; conforms to the applicable requirements per US 21 CFR (J) and EN 60825-1; also UL 1950 applications

Certifications: Fully RoHS compliant

Part Numbers:
DNM-100: DNM, CU3, inline
DNM-101: DNM, CU3, inline, Virtual Zero Delay
DNM-110: DNM, CU3, Span
DNM-200: DNM, Fiber, MM, Inline, 62.5µm, 850nm, 50:50
DNM-202: DNM, Fiber, MM, Inline, 62.5µm, 850nm, 70:30
DNM-210: DNM, Fiber, MM, Span, 62.5µ, 850nm
DNM-220: DNM, Fiber, MM, Inline, 5Oµm, 850nm, 50:50
DNM-222: DNM, Fiber, MM, Inline, 50µm, 850nm, 70:30
DNM-230: DNM, Fiber, MM, Span, 50µm, 850nm
DNM-300: DNM, Fiber, SM, Inline, 8.5µm, 1310nm,50:50
DNM-302: DNM, Fiber, SM, Inline, 8.5µm, 1310nm 70:30
DNM-310: DNM, Fiber, SM, Span, 8.5µm, 1310nm
DNM-320: DNM, Fiber, SM, Inline, 8.5µm, 1550nm, 50:50
DNM-330: DNM, Fiber, SM, Span, 8.5µm, 1550nm

  • Twelve 1Gbps ports
  • Fiber and Copper media support
  • In-line and SPAN network modules
  • Virtual Zero Delay™
  • Passive in-line or span access
  • Link fault detect (LFD)
  • Status LEDs for each port
  • RMON-type statistics
  • IEEE 8O2.3az, SyncE compliant*
  • Compatible with all models of Director and Director Pro
*Applies to DNM-101 Only

Accessori - Foto Prodotto - Director Network Module, 10/100/1000Base-T
Director Network Module, 10/100/1000Base-T

Clicca per ingrandire - Accessori - Foto Prodotto - Director Network Module, 10/100/1000Base-T
Director Network Module (DNM) is a pluggable, field upgradeable Director module with 12 network ports. Depending on the DNM model, each module provides 6 in-line links or 12 Span ports, supporting Gigabit SX/LX/ZX Fiber or 10/100/1000 Copper media. Director supports up to 2 modules. Each Director chassis has two DNM slots that may be populated with different models of DNM.

Director Network Module (DNM) is a pluggable, field upgradeable Director module with 12 network ports. Depending on the DNM model, each module provides 6 in-line links or 12 Span ports, supporting Gigabit SX/LX/ZX Fiber or 10/100/1000 Copper media. Director supports up to 2 modules. Each Director chassis has two DNM slots that may be populated with different models of DNM.

Virtual Zero Delay
VZD is a new, patent-pending technology from Net Optics designed to improve network reliability when using copper taps. Net Optics´ new DNM-101 Module´s innovative Virtual Zero Delay circuitry guarantees that Director™ and Director Pro™ in-line copper connections will never lose their links when power goes off for whatever reason-such as power failures or during planned power up and power down events. In the past, link renegotiation has been a major challenge for copper taps, costing precious seconds or minutes of link downtime when Tap power transitions. DNM-1O1 VZD liminates those lengthy renegotiation cycles by preserving the link state through power transitions, as if no break existed.


DNM-100
 
Director Network Module, Inline, 10/100/1000Base-T, 12 Ports

DNM-110
 
Director Network Module, SPAN, 10/100/1000Base-T, 12 Ports

Performance:
Hardware throughput: 12Gbps
Network Recovery time (DNM-101): Zero Delay at 1Ombps, <50µs @ 100mbps,40ms at 1Gbps
RMON statistics: Current utilization, peak utilization, peak time, total packets, total bytes, CRC errors, collision packets, oversize packets, undersize packets. Available via Indigo Management Software.
Alarms: Utilization threshold alarm for each network port programmable through Director CLI

Mechanical:
Dimensions: 1.35" high x 10.38" deep x 5.05" wide
Weight: 1.5 lbs

Indicators: (All ports) Link LEDs (with speed indication on Copper ports), (All ports) Activity LEDs

Copper Interfaces:
(12) RJ45 Network Ports 10/100/1000Mbps
(6) In-line or (12) SPAN depending on model
22-24 AWG unshielded twisted pair cable, CAT5e or better recommended

Fiber Optic Interfaces:
(12) Gigabit SX Network Ports, LC type
(6) In-line or (12) SPAN depending on model
Fiber Type: Corning Multimode 50 or 62.5/125µm, 850 nm
Transceiver: GigaBit SX 850nm, VCSEL, supports 62.5/125µm
Transceiver: Gig2iBit LX 1310nm or 1550nm, VCSEL, supports 8.5/125µm
Safety: Class 1, eye safe, laser emitter type; conforms to the applicable requirements per US 21 CFR (J) and EN 60825-1; also UL 1950 applications

Certifications: Fully RoHS compliant

Part Numbers:
DNM-100: DNM, CU3, inline
DNM-101: DNM, CU3, inline, Virtual Zero Delay
DNM-110: DNM, CU3, Span
DNM-200: DNM, Fiber, MM, Inline, 62.5µm, 850nm, 50:50
DNM-202: DNM, Fiber, MM, Inline, 62.5µm, 850nm, 70:30
DNM-210: DNM, Fiber, MM, Span, 62.5µ, 850nm
DNM-220: DNM, Fiber, MM, Inline, 5Oµm, 850nm, 50:50
DNM-222: DNM, Fiber, MM, Inline, 50µm, 850nm, 70:30
DNM-230: DNM, Fiber, MM, Span, 50µm, 850nm
DNM-300: DNM, Fiber, SM, Inline, 8.5µm, 1310nm,50:50
DNM-302: DNM, Fiber, SM, Inline, 8.5µm, 1310nm 70:30
DNM-310: DNM, Fiber, SM, Span, 8.5µm, 1310nm
DNM-320: DNM, Fiber, SM, Inline, 8.5µm, 1550nm, 50:50
DNM-330: DNM, Fiber, SM, Span, 8.5µm, 1550nm

  • Twelve 1Gbps ports
  • Fiber and Copper media support
  • In-line and SPAN network modules
  • Virtual Zero Delay™
  • Passive in-line or span access
  • Link fault detect (LFD)
  • Status LEDs for each port
  • RMON-type statistics
  • IEEE 8O2.3az, SyncE compliant*
  • Compatible with all models of Director and Director Pro
*Applies to DNM-101 Only

Accessori - Foto Prodotto - iBypass HD Modules
iBypass HD Modules

Clicca per ingrandire - Accessori - Foto Prodotto - iBypass HD Modules

DBM-100
 
DBM, 10/100/1000, RJ45

DBM-200
 
DBM, Gig, MM, 62.5um, SFP Monitor Ports

DBM-250
 
DBM, Gig, MM, 50um, SFP Monitor Ports

DBM-300
 
DBM, Gig, SM, 8.5um, SFP Monitor Ports


Accessori - Foto Prodotto - QSFP+ break out cable, MTP to 4 Duplex LC
QSFP+ break out cable, MTP to 4 Duplex LC

Clicca per ingrandire - Accessori - Foto Prodotto - QSFP+ break out cable, MTP to 4 Duplex LC

CKT-MTP-4LC-50-OM4
 
QSFP+ break out cable, MTP to 4 Duplex LC


Accessori - Foto Prodotto - Direct-Attach SFP+ Twinax Cable, 5 meter
Direct-Attach SFP+ Twinax Cable, 5 meter

Clicca per ingrandire - Accessori - Foto Prodotto - Direct-Attach SFP+ Twinax Cable, 5 meter
This 5-meter copper cable connects from one SFP+ slot to another, without the need for SFP+ transceivers. It is an economical solution for interconnecting 10 Gigabit Net Optics products, such as connecting an iLink Agg xStream to a Director xStream or other network equipment that have SFP+ slots.

This 5-meter copper cable, known as “direct-attach” or “twinax,” connects from one SFP+ slot to another, without the need for SFP+ transceivers. It is an economical solution for interconnecting 10 Gigabit Net Optics products, such as connecting an iLink Agg xStream to a Director xStream. It is also great for making short 10 Gigabit connections between Net Optics products and most servers, network switches, and monitoring equipment that have SFP+ slots.

The Direct-Attach cable is terminated on both ends with mechanical connectors that plug directly into SFP+ slots the same as SFP+ transceiver modules to. The cable is fully passive; it does not have signal buffers or amplifiers.

The Direct-Attach cable is compatible with all Director, Director xStream, Director xStream Pro, and iLink Agg xStream models. It is not compatible with RG-800 series Regeneration Taps.


490-0655-001
 
Direct-Attach SFP+ Twinax Cable, 5 meter

Operating:
Operating Temperature: 0ºC to 40ºC
Storage Temperature: -55ºC to 85ºC
Relative Humidity: 5% min, 95% max, non-condensing

Length: 5 meters

Data Rate: 10 Gbps

Connectors: (2) SFP+

Standards: SFF-8431 Compliant

Part Number: 490-0655-001

Standards: SFF-8431 Compliant

Compatibility:
Fully compatible with the following Net Optics product families:
- xBalancer
- Director xStream
- Director xStream Pro
- iLink Agg xStream

Key Features
  • Interconnect equipment with 10 Gigabit SFP+ slots without the cost of SFP+ transceivers
  • Replace 2 SFP+ transceivers and one fiber or copper cable with a single cable
  • Fully RoHS compliant

Foto non
disponibile
Fiber Cable Kit - Multimode

These fiber cable kits give you all the cables you need to deploy a Net Optics Flex Tap.

705-0027-001
 
Cable Kit, Cable Assembly, MTP/MTP, Multimode, OM4, 50µm


Accessori - Foto Prodotto - Fiber Cable Kit - Multimode
Fiber Cable Kit - Multimode

Clicca per ingrandire - Accessori - Foto Prodotto - Fiber Cable Kit - Multimode
These fiber cable kits give you all the cables you need to deploy a Net Optics LC Fiber Tap in an LC- or SC-connected environment. Each kit includes two 3-meter full duplex cables and one 3-meter analyzer cable. The analyzer cable splits the tap´s monitor outputs to plug into two NICs on the monitoring tool.

These fiber cable kits give you all the cables you need to deploy a Net Optics LC Fiber Tap in an LC- or SC- connected environment. Each kit includes two 3-meter full duplex cables and one 3-meter analyzer cable. The analyzer cable splits the tap’s monitor ouptuts from one duplex LC connector to two connectors that plug into two NICs on the monitoring tool.

Kits are available for all 10G and 1G singlemode (SM) and multimode (MM) media types. LC/LC cables have LC-type connectors on both ends, for use in LC-connectorized environments. LC/SC cables have LC-type connectors on the tap ends and SC connectors on the other ends, for use in SC-connectorized environments. With these cable kits, LC Fiber Taps can be used in all environments and there is no more need for bulky SC Fiber Taps.


705-0012-001
 
LC/LC connector, Multimode 50µm

705-0013-001
 
LC/LC connector, Multimode 62,5µm

705-0015-001
 
LC/SC connector, Multimode 50µm

705-0016-001
 
LC/SC connector, Multimode 62,5µm

Fiber Cable Kit Specifications:

Operating Specifications:
Operating Temperature: 0ºC to 40ºC
Storage Temperature: -55ºC to 85ºC
Relative Humidity: 5% min, 95% max, non-condensing

Dimensions:
Length: 3m, each cable

Fiber Type:
Multimode: Corning 50 or 62.5/125 µm, 850nm wavelength
Grade: OM3
Insertion Loss: 2 dB max
Singlemode: Corning 8.5/125 µm, 1310nm wavelength
Grade: OM3
Insertion Loss: 2 dB max

Connectors:
Network End: Duplex connectors, LC type
Monitoring End: Duplex connectors, LC or SC type (see chart)

Kit Contents:
(2) Duplex fiber optic cables
(1) Analyzer fiber optic cable

Part Numbers:
705-0012-001
705-0013-001
705-0015-001
705-0016-001

Passive, Secure Technology
  • All the cables you need to connect an LC Fiber Tap in an LC- or SC-connectorized environment
  • Custom analyzer breakout cable saves panel space
  • Fully RoHS compliant
Warranty
  • All Net Optics products come standard with a 1 year manufacturer’s warranty
Ease of Use
  • Color coded to indicate media type
  • Short 3 meter length eliminates cable clutter
  • No need to stock SC Fiber Taps
  • Compatible with Net Optics LC Fiber Taps

Accessori - Foto Prodotto - Fiber Cable Kit - Singlemode
Fiber Cable Kit - Singlemode

Clicca per ingrandire - Accessori - Foto Prodotto - Fiber Cable Kit - Singlemode
These fiber cable kits give you all the cables you need to deploy a Net Optics LC Fiber Tap in an LC- or SC-connected environment. Each kit includes two 3-meter full duplex cables and one 3-meter analyzer cable. The analyzer cable splits the tap´s monitor outputs to plug into two NICs on the monitoring tool.

These fiber cable kits give you all the cables you need to deploy a Net Optics LC Fiber Tap in an LC- or SC- connected environment. Each kit includes two 3-meter full duplex cables and one 3-meter analyzer cable. The analyzer cable splits the tap’s monitor ouptuts from one duplex LC connector to two connectors that plug into two NICs on the monitoring tool.

Kits are available for all 10G and 1G singlemode (SM) and multimode (MM) media types. LC/LC cables have LC-type connectors on both ends, for use in LC-connectorized environments. LC/SC cables have LC-type connectors on the tap ends and SC connectors on the other ends, for use in SC-connectorized environments. With these cable kits, LC Fiber Taps can be used in all environments and there is no more need for bulky SC Fiber Taps.


705-0014-001
 
LC/LC connector, Singlemode 8,5µm

705-0017-001
 
LC/SC connector, Singlemode 8,5µm

Fiber Cable Kit Specifications:

Operating Specifications:
Operating Temperature: 0ºC to 40ºC
Storage Temperature: -55ºC to 85ºC
Relative Humidity: 5% min, 95% max, non-condensing

Dimensions:
Length: 3m, each cable

Fiber Type:
Multimode: Corning 50 or 62.5/125 µm, 850nm wavelength
Grade: OM3
Insertion Loss: 2 dB max
Singlemode: Corning 8.5/125 µm, 1310nm wavelength
Grade: OM3
Insertion Loss: 2 dB max

Connectors:
Network End: Duplex connectors, LC type
Monitoring End: Duplex connectors, LC or SC type (see chart)

Kit Contents:
(2) Duplex fiber optic cables
(1) Analyzer fiber optic cable

Part Numbers:
705-0014-001
705-0017-001

Passive, Secure Technology
  • All the cables you need to connect an LC Fiber Tap in an LC- or SC-connectorized environment
  • Custom analyzer breakout cable saves panel space
  • Fully RoHS compliant
Warranty
  • All Net Optics products come standard with a 1 year manufacturer’s warranty
Ease of Use
  • Color coded to indicate media type
  • Short 3 meter length eliminates cable clutter
  • No need to stock SC Fiber Taps
  • Compatible with Net Optics LC Fiber Taps

Accessori - Foto Prodotto - 12 Volt 350W 12-Lead Power Supply Module
12 Volt 350W 12-Lead Power Supply Module

Clicca per ingrandire - Accessori - Foto Prodotto - 12 Volt 350W 12-Lead Power Supply Module
24 power leads in a 1U high rack-mountable chassis to support 24 single or 12 redundant power connections for Net Optics 10/100 and GigaBit Taps.

OverviewClean up your 12V DC Tap power connections. The Net Optics 12-Lead Power Supply packs two 12-lead power connections into 1U of rack of space. You now have the option to power 24 devices or 12 with redundant power connections. Multi voltage AC power enables worldwide interoperability for global deployments.

Combine up to 24 or 12 rack-mountable Net Optics 12V DC Taps, Port Aggregators and Dual Port Aggregators into one easy to manage supply. Each power lead delivers up to 2.4Amps across the two 12-lead connectors for a combined total of 350 Watts.

Easy to read front panel LEDs provide on the spot confirmation of power status.


PWR12-350
 
12 Volt 350W 12-Lead Power Supply Module

Operating Specifications:
Operating Temperature: 0°C to 40°C
Storage Temperature: -20°C to 85°C
Relative Humidity: 10% min, 95% max, non-condensing


Mechanical Specifications:

Power Supply:
AC input: 85-264 VAC, 47-63 Hz, 5 A max @ 115 VAC,
2.50A max @ 230 VAC
DC input: -48VDC nominal, -36 to -72VDC, 12.2 A max @ 36 VDC,
5.8 A max @ 72 VDC
DC output: 12V, 3.6A per lead (AC model), 2.4A per lead (DC model)
Output Power: 350 Watts

Dimensions: 1.75" high x 12.5" deep x 17" wide

Cable Interface:
Connector Type: DC Jack barrel type connector w/ 2.5 mm ID

Certifications:
Fully RoHS compliant
Part Number:
PWR12-350

Technology
  • Powers 24 single or 12 redundant power connections, eliminating clutter from multiple desktop power supplies.
  • Universal power enables worldwide deployment.
  • Fully RoHS compliant
Warranty
  • All Net Optics products come standard with a 1 year manufacturer’s warranty
  • Optional 1 or 2 year extended warranty available at time of product purchase
Ease of Use
  • LEDs indicate input power
  • Accepts 110 and 220 VAC input
  • Strain-relief cable control
  • Two 12-lead connection sets support easy pairing for power redundancy
  • Two meter DC power leads for easy connection
  • Compatible with Net Optics 12 VDC devices

Accessori - Foto Prodotto - 12 Volt 350W 8-Lead Power Supply Module
12 Volt 350W 8-Lead Power Supply Module

Clicca per ingrandire - Accessori - Foto Prodotto - 12 Volt 350W 8-Lead Power Supply Module
Eliminate the clutter of power bricks going to individual power connections with the use of Net Optics 8 Lead Power Supply. This dual AC input Power Supply contains 16 DC power leads in a 1U rack-mountable chassis. Power can be supplied to 16 single devices or the leads can be used in a redundant configuration that supports up to 8 devices.

Eliminate the clutter of power bricks going to individual power connections with the
use of Net Optics 8 Lead Power Supply. This dual AC input Power Supply contains
16 DC power leads in a 1U rack-mountable chassis. Power can be supplied to 16
single devices or the leads can be used in a redundant configuration that supports up
to 8 devices.
The use of Net Optics rack-mountable iTap Dual Port Aggregator Taps and iBypass
Switches will require using the 8 Lead Power Supply as it supports 3.6A per lead.
The unit is compatible with 100-230 VAC input, and delivers 350 Watts of power to
Net Optics 12 VDC devices worldwide.


PWR12-350-8L
 
12 Volt 350W 8-Lead Power Supply Module

Technology Features
  • Power for 16 single or 8 redundant power connections
  • Dual 8 lead connection sets support easy pairing for power redundancy
  • Universal power enables worldwide deployment
Ease of Use
  • LED indicators show redundant power status
  • Accepts 110 and 220 VAC input
  • Strain-relief cable control
  • Incorporates 19" rack mount frame for easy installation
  • Two meter DC power leads for easy connection
  • Compatible with all Net Optics iTap enabled 12 VDC devices

Foto non
disponibile
40 Gigabit QSFP+ Transceiver

These transceiver kits include a 40 Gbps QSFP+ transceiver and matching 3 meter cable for various fiber media.

QSFP+KT-50SR4
 
40G, 50µm, QSFP+ Transceiver, SR

QSFP+KT-LR
 
40G, QSFP+ Transceiver, LR


Accessori - Foto Prodotto - 10 Gigabit Base XFP Transceiver
10 Gigabit Base XFP Transceiver

Clicca per ingrandire - Accessori - Foto Prodotto - 10 Gigabit Base XFP Transceiver
These modular transceiver kits include a 10 Gbps XFP transceiver and matching cable for various fiber media.

For greater flexibility, many Net Optics products use industry-standard 10 Gigabit Small Form Factor Pluggable (XFP) transceiver modules. This functionality enables end users to tap into different network media and deploy different types of monitoring tools depending on the application. Net Optics offers a range of products that utilize XFPs including Port Aggregators, Link Aggregators, Bypass Switches, and the Director Data Monitoring Switch.


XFPKT-SR
 
10 Gigabit SR Base XFP Transceiver w/cable 62.5 or 50µm, 850nm

XFPKT-LR
 
10 Gigabit LR Base XFP Transceiver w/cable 8.5µm, 1310nm

XFPKT-ER
 
10 Gigabit ER Base XFP Transceiver w/cable 8.5µm, 1550nm


Accessori - Foto Prodotto - 10 Gigabit Base SFP+ Transceiver
10 Gigabit Base SFP+ Transceiver

Clicca per ingrandire - Accessori - Foto Prodotto - 10 Gigabit Base SFP+ Transceiver
These modular transceiver kits include a 10 Gbps SFP transceiver and matching cable for various fiber media.

For greater flexibility, many Net Optics products use industry-standard 10 Gigabit Small Form Factor Pluggable (SFP) transceiver modules. This functionality enables end users to tap into different network media and deploy different types of monitoring tools depending on the application. Net Optics offers a range of products that utilize SFPs including Port Aggregators, Link Aggregators, Bypass Switches, and the Director Data Monitoring Switch.


SFP+KT-SR
 
10 Gigabit SR Base SFP+ Transceiver w/cable 62,5 850nm

SFP+KT-50SR
 
10 Gigabit SR Base SFP+ Transceiver w/cable 50µm 850nm

SFP+KT-LR
 
10 Gigabit LR Base SFP+ Transceiver w/cable 8,5µm, 1310nm

SFP+KT-ER
 
10 Gigabit ER Base SFP+ Transceiver w/cable 8.5µm, 1550nm


Accessori - Foto Prodotto - 1 Gigabit Base SFP Transceiver
1 Gigabit Base SFP Transceiver

Clicca per ingrandire - Accessori - Foto Prodotto - 1 Gigabit Base SFP Transceiver
These modular transceiver kits include a 1 Gbps SFP transceiver and matching cable for various fiber media.

For greater flexibility, many Net Optics products use industry-standard 1 Gigabit Small Form Factor Pluggable (SFP) transceiver modules. This functionality enables end users to tap into different network media and deploy different types of monitoring tools depending on the application. Net Optics offers a range of products that utilize SFPs including Port Aggregators, Link Aggregators, Bypass Switches, and the Director™ Data Monitoring Switch.

Link Lengths
Net Optics XFP modules support the following maximum lengths for network links:

SFP TypeFiber GradeMaximum Link Length
CU3Copper Media100 meters
GCUCopper Media100 meters
SXOM3860 meters
SXOM2550 meters
SXOM1220 meters
FXOM22 kilometers
LX2 kilometers guaranteed, 10 to 20 kilometers typical


SFPKT-SX
 
1 Gigabit SX Base SFP Transceiver w/cable 62,5µm 850nm

SFPKT-50SX
 
1 Gigabit SX Base SFP Transceiver w/cable 50µm 850nm

SFPKT-LX
 
1 Gigabit LX Base SFP Transceiver w/cable 8,5µm, 1310nm

SFPKT-ZX
 
1 Gigabit ZX Base SFP Transceiver w/cable 8,5µm, 1550nm

SFPKT-GCU
 
1 Gigabit Copper SFP Transceiver

Operating:

Operating Temperature: 0ºC to 40ºC
Storage Temperature: -10ºC to 70ºC
Relative Humidity: 10% min, 95% max, non-condensing

Fiber Optic Interface:

Connector:
Class 1, eye-safe, laser emitter type. These Class 1
Lasers conform to the applicable requirements per US 21 CFR (J)
and EN 60825-1, also UL 1950 applications.

Multimode, SX:
Optical Transmitter Wave Length: 850nm nominal
Output Power: -9.5dBm min, -3dBm max
Optical Reciever Input Sensitivity: -17 dB max

Singlemode, FX:
Optical Transmitter Wave Length: 1300nm nominal
Output Power: -20dBm min, +14dBm max
Optical Reciever Input Sensitivity: -31 dB min, -14dB max

Singlemode, LX:
Optical Transmitter Wave Length: 1310nm nominal
Output Power: -9.5dBm min, -3dBm max
Optical Reciever Input Sensitivity: -19 dB max

Fiber Cable Interface:

Wavelength: 850nm, 1310nm, or 1550nm
Fiber Type:
Corning Multimode 50 or 62.5/125μm
Corning Singlemode 8.5/125μm

Copper Cable Interface:

22-24 AWG unshielded twisted pair cable, CAT5/CAT5E

Certifications:

Fully RoHS compliant

Passive, Secure Technology
  • All needed cables included
  • RoHS Compliant
  • Designed with industry-standard MSA-compliant Small Form Factor Pluggable (SFP) ports
  • Compatible with IEEE 802.3z
  • Hot-pluggable
  • Low power, high performance
  • Single +3.3 V power supply operation
  • Auto-negotiation (copper model)
  • Custom RJ-45 connector with integrated magnetics (copper model)

Accessori - Foto Prodotto - 100 Megabit FX Base SFP Transceiver
100 Megabit FX Base SFP Transceiver

Clicca per ingrandire - Accessori - Foto Prodotto - 100 Megabit FX Base SFP Transceiver

SFPKT-FX
 
100 Megabit FX Base SFP Transceiver w/cable 62,5µm, 1300nm


Accessori - Foto Prodotto - 10/100/1000Base-T SFP Transceiver
10/100/1000Base-T SFP Transceiver

Clicca per ingrandire - Accessori - Foto Prodotto - 10/100/1000Base-T SFP Transceiver

SFPKT-CU3
 
10/100/1000Base-T SFP Transceiver w/cable


Accessori - Foto Prodotto - DC Power Supply Module for Director Series
DC Power Supply Module for Director Series

Clicca per ingrandire - Accessori - Foto Prodotto - DC Power Supply Module for Director Series

DIR-PWRDC
 
1 DC Power Supply


Accessori - Foto Prodotto - AC Power Supply Module for Director Series
AC Power Supply Module for Director Series

Clicca per ingrandire - Accessori - Foto Prodotto - AC Power Supply Module for Director Series

DIR-PWRAC
 
1 AC Power Supply


Accessori - Foto Prodotto - DC Power Supply Module for xStream 10/40 Series
DC Power Supply Module for xStream 10/40 Series

Clicca per ingrandire - Accessori - Foto Prodotto - DC Power Supply Module for xStream 10/40 Series

XF-2PWRDC
 
1 DC Power Supply Module


Accessori - Foto Prodotto - AC Power Supply Module for xStream 10/40 Series
AC Power Supply Module for xStream 10/40 Series

Clicca per ingrandire - Accessori - Foto Prodotto - AC Power Supply Module for xStream 10/40 Series

XF-2PWRAC
 
1 AC Power Supply Module


Accessori - Foto Prodotto - Replacement Fan Module for xStream 10/40
Replacement Fan Module for xStream 10/40

Clicca per ingrandire - Accessori - Foto Prodotto - Replacement Fan Module for xStream 10/40

XF-2FAN
 
1 Replacement Fan Module


Accessori - Foto Prodotto - Flex Tap - Rack Mount Frame
Flex Tap - Rack Mount Frame

Clicca per ingrandire - Accessori - Foto Prodotto - Flex Tap - Rack Mount Frame
The small profile of the Flex Tap allows you to install up to 24 Taps in a 1U chassis. Flex Tap can be used with 1 Gigabit, 10 Gigabit, 40 Gigabit and 100 Gigabit networks while supporting passive monitoring. It is available in Multimode and Singlemode models.

RK-FLEX-24
 
Rack Mount Frame


Accessori - Foto Prodotto - Spacer Unit/Rackmount for Flex Tap
Spacer Unit/Rackmount for Flex Tap

Clicca per ingrandire - Accessori - Foto Prodotto - Spacer Unit/Rackmount for Flex Tap

RK-FLEX-SPACER
 
Spacer Unit/Rackmount for Flex Tap


Accessori - Foto Prodotto - Rackmount Frame, for 12x 4.5
Rackmount Frame, for 12x 4.5

Clicca per ingrandire - Accessori - Foto Prodotto - Rackmount Frame, for 12x 4.5
Designed specifically for easy rack-mounting of Net Optics Taps. Accommodates 12 4.5" wide taps in a 4U frame.

Twelve Slot Rack Mount Frame

Net Optics new custom 19" rack mount panels accommodate up to twelve slim line Taps featuring our new metal design. These new 4U rack mount panel frames are easily distinguishable from previous Net Optics panels due to a lighter silver color, and an integrated flush mount product feature. Rack mount panels are ordered separately when purchasing Net Optics Tap products.

Features:

* Flush Mount
* 4U (7" x 19")
* Up to 12 slim line devices
* Includes mounting hardware for easy deployment


RK-12V2
 
Designed specifically for easy rack-mounting of Net Optics Taps. Accommodates 12 4.5" wide taps in a 4U frame.


Accessori - Foto Prodotto - Rackmount Frame, for 2x 8.75
Rackmount Frame, for 2x 8.75

Clicca per ingrandire - Accessori - Foto Prodotto - Rackmount Frame, for 2x 8.75
Designed specifically for easy rack-mounting of Net Optics intelligent iTap family of products . Accommodates two 8.75" wide taps in a 1U frame.

Two Slot iTap Rack Mount Frame

Net Optics new custom 19" rack mount panels accommodate our intelligent iTap technology family of products. These new 1U rack mount panel frames are easily distinguishable from previous Net Optics panels due to a lighter silver color, and an integrated flush mount product feature. Rack mount panels are ordered separately when purchasing iTap technology products.

The following products are supported:

* iTap GigaBit Port Aggregators
* iTap 10/100/1000 Port Aggregator
* iBypass Switch

Features:

* Flush Mount
* 1U (1.75" x 19")
* Up to 2 devices
* Includes mounting hardware for easy deployment


RK-ITP2
 
Designed specifically for easy rack-mounting of Net Optics intelligent iTap family of products. Accommodates two 8.75" wide taps in a 1U frame.


Accessori - Foto Prodotto - Rackmount Frame, for 8x 4
Rackmount Frame, for 8x 4

Clicca per ingrandire - Accessori - Foto Prodotto - Rackmount Frame, for 8x 4
Designed specifically for high-density rack-mounting of Net Optics LC fiber Slim Taps. Accommodates eight 4" inch wide taps in a 1U frame.

8 Slot Rack Mount Frame

These custom frames are designed specifically for rack-mounting Net Optics LC Fiber Slim Taps. As a key ease-of-use feature, these innovative slim profile Taps are engineered with integrated thumbscrews so insertion into the frame is plug-and-play, requiring no additional components. Eight slot frames are compatible with any 19" rack, and accommodate up to eight LC fiber Slim Taps in a streamlined 1U design.


RK-8V2
 
Designed specifically for high-density rack-mounting of Net Optics LC fiber Slim Taps. Accommodates eight 4" inch wide taps in a 1U frame.


Accessori - Foto Prodotto - Rackmount Frame, for 6x 3.187
Rackmount Frame, for 6x 3.187

Clicca per ingrandire - Accessori - Foto Prodotto - Rackmount Frame, for 6x 3.187
Designed specifically for easy rack-mounting of Net Optics Slim Taps. Accommodates six 3.187" wide taps in a 1U frame.

6 Slot Rack Mount Frame

These custom frames are designed specifically for rack-mounting Net Optics Slim Taps. As a key ease-of-use feature, these innovative slim profile Taps are engineered with integrated thumbscrews so insertion into the frame is plug-and-play, requiring no additional components. Six slot frames are compatible with any 19" rack, accomodating up to six 3.187" Taps in a streamlined 1U design.


RK-6V2
 
Designed specifically for easy rack-mounting of Net Optics Slim Taps. Accommodates six 3.187" wide taps in a 1U frame.


Accessori - Foto Prodotto - Rackmount Frame, for 3x 4.5
Rackmount Frame, for 3x 4.5

Clicca per ingrandire - Accessori - Foto Prodotto - Rackmount Frame, for 3x 4.5
Designed specifically for easy rack-mounting of Net Optics Taps. Accommodates three 4.5" wide taps in a 1U frame.

Three Slot Rack Mount Frame

Net Optics new custom 19" rack mount panels accommodate up to three Taps featuring our new metal design. These new 1U rack mount panel frames are easily distinguishable from previous Net Optics panels due to a lighter silver color, and an integrated flush mount product feature. Rack mount panels are ordered separately when purchasing Net Optics Tap products.

The following products are supported:

* 10/100 Port Aggregator Taps
* 10/100/1000 Tap


Features:

* Flush Mount
* 1U (1.75" x 19")
* Up to 3 devices

Includes mounting hardware for easy deployment


RK-3V2
 
Designed specifically for easy rack-mounting of Net Optics Taps. Accommodates three 4.5" wide taps in a 1U frame.


Accessori - Foto Prodotto - Rackmount Frame, for 3x 4.5
Rackmount Frame, for 3x 4.5

Clicca per ingrandire - Accessori - Foto Prodotto - Rackmount Frame, for 3x 4.5
Designed specifically for easy rack-mounting of Net Optics Taps. Accommodates three 4.5" wide taps in a 1U frame.

3 Slot Rack Mount Frame

These custom frames are designed especially for rack-mounting Net Optics Taps. As a key ease-of-use feature, these innovative Taps are engineered with integrated thumbscrews so insertion into the frame is plug-and-play, requiring no additional components. Three slot frames are compatible with any 19" rack, accomodating up to three 4.5" Taps in a streamlined 1U design.


RK-3
 
Designed specifically for easy rack-mounting of Net Optics Taps. Accommodates three 4.5" wide taps in a 1U frame.


Accessori - Foto Prodotto - Rackmount Frame, for 2x 6.5
Rackmount Frame, for 2x 6.5

Clicca per ingrandire - Accessori - Foto Prodotto - Rackmount Frame, for 2x 6.5
Designed specifically for easy rack-mounting of Net Optics Taps. Accommodates two 6.5" wide taps in a 1U frame.

Two Slot Rack Mount Frame

Net Optics new custom 19" rack mount panels accommodate up to two Taps featuring our new metal design. These new 1U rack mount panel frames are easily distinguishable from previous Net Optics panels due to a lighter silver color, and an integrated flush mount product feature. Rack mount panels are ordered separately when purchasing Net Optics Tap products.

The following products are supported:

* GigaBit Port Aggregator Taps


Features:

* Flush Mount
* 1U (1.75" x 19")
* Up to 2 devices
* Includes mounting hardware for easy deployment


RK-2V2
 
Designed specifically for easy rack-mounting of Net Optics Taps. Accommodates two 6.5" wide taps in a 1U frame.


Accessori - Foto Prodotto - Blank Plates
Blank Plates

Clicca per ingrandire - Accessori - Foto Prodotto - Blank Plates

RK-2V2-BPL
 
Blank Plate

RK-3V2-BPL
 
Blank Plate

RK-3-BPL
 
Blank Plate

RK-8V2-BPL
 
Blank Plate

RK-ITP-BPL
 
Blank Plate



RICHIESTA DEL PREZZO





*:
3+6=
* CAMPI OBBLIGATORI
NOTE:
I tuoi dati saranno utilizzati solamente per ragioni interne e non saranno mai forniti a terze parti sotto nessuna circostanza.
+49 6102 7487-0   |       |    Disclaimer   |    Condizioni del contratto   |    Mappa del sito   |    Imprint
© 2016 by CROSS Industries AG
CERCA PRODOTTO:              CERCA